• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.13 no.3
• /
• pp.237-244
• /
• 2001

The watershed information of the Mankyung River and Dongjin River is obtained and analysed using the GIS tool. The informations i.e., digital map, land use, point sources, weather station, water quality measurement station, and pollutants load unit are managed by DB system. The slope, rainfall, and generated pollutants loads of COD, TN and TP which are the input data of the rainfall-runoff-pollutants load model are estimated. From the analysis of the collected and generated data, the almost watershed area is composed of agricultural lands except the upstream regions. The population and industrial area are densely located in Cheonju City and Iksan City, whereas the farming areas are widely distributed.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.20 no.1
• /
• pp.33-37
• /
• 2000

The 1-3 piezoelectric composite transducer with 75 volume percents PZT was fabricated by the dicing-filling method. The resonance modes of the 1-3 transducer have been studied with electric impedance measurement as a function of frequency. The fundamental frequencies of the planar and thickness mode were observed at 0.95MHz and 1.63MHz respectively, but the lateral mode was not observed. In the thickness mode, the electromechanical coupling coefficient of the 1-3 piezoelectric composite transducer, 0.54, was very closed to that of the single phase PZT(0.52). The pulse-echo response by exciting the 1-3 transducer with an electric pulse was observed from the water/reflector interface, and analyzed bandwidth by the spectrum of the impulse response. The quality factor Q for the 1-3 transducer was observed as 1.5 smaller than that of the single phase(80) and then the 1-3 transducer may be used to the broad band type transducer applications.

• Journal of Soil and Groundwater Environment
• /
• v.18 no.3
• /
• pp.33-51
• /
• 2013

Spatial and temporal characteristics of nitrate contamination and hydrogeochemical parameters were investigated for springs and surficial and bedrock groundwaters in northeastern part of Hongseong. Two field investigations were conducted at dry and wet seasons in 2011 for 120 sites including measurement of field parameters with chemical analyses of major dissolved constituents. Nitrate concentrations were at background levels in springs while 45% of bedrock groundwater and 49% of surficial groundwater exceeded the drinking water standard of nitrate (10 mg/L as $NO_3$-N). The difference in nitrate concentrations between surficial and bedrock groundwater was statistically insignificant. Cumulative frequency distribution of nitrate concentrations revealed two inflection points of 2 and 16 mg/L as $NO_3$-N. Correlation analysis of hydrogeochemical parameters showed that nitrate had higher correlations with Sr, Mg, Cl, Na, and Ca, in surficial groundwater in both dry and wet season. In contrast, nitrate had much weaker correlations with other hydrogeochemical parameters in bedrock groundwater compared to surficial groundwater and had significant correlations only in wet season. Temporally, nitrate and chloride concentrations decreased and dissolved oxygen (DO) increased from dry season to wet season, which indicates that increased recharge during the wet season affected groundwater quality. Aerobic conditions were predominant for both surficial and bedrock groundwater indicating low natural attenuation potential of nitrate in the aquifers of the study area.

• Computers and Concrete
• /
• v.20 no.3
• /
• pp.275-282
• /
• 2017

Grouting is an operation often carried out to consolidate and seal the rock mass in dam sites and tunnels. One of the important parameters in this operation is grouting pressure. In this paper, analytical models used to estimate pressure are investigated. To validate these models, grouting data obtained from Seymareh and Aghbolagh dams were used. Calculations showed that P-3 model from Groundy and P-25 model obtained from the results of grouting in Iran yield the most accurate predictions of the pressure and measurement errors compared to the real values in P-25 model in this dams are 12 and 14.33 Percent and in p-3 model are 12.25 and 16.66 respectively. Also, SPSS software was applied to define the optimum relation for pressure estimation. The results showed a high correlation between the pressure with the depth of the section, the amount of water take, rock quality degree and grout volume, so that the square of the multiple correlation coefficient among the parameters in this dams were 0.932 and 0.864, respectively. This indicates that regression results can be used to predict the amount of pressure. Eventually, the relationship between the parameters was obtained with the correlation coefficient equal to 0.916 based on the data from both dams generally and shows that there is a desirable correlation between the parameters. The outputs of the program led to the multiple linear regression equation of P=0.403 Depth+0.013 RQD+0.011 LU-0.109 V+0.31 that can be used in estimating the pressure.

• Journal of the Korean Society of Tobacco Science
• /
• v.28 no.2
• /
• pp.111-116
• /
• 2006

It is very important to add uniformly casing materials on tobacco for taste and flavor. However, analysis of casing materials was spent much time, effort and money. The object of this study was the development of a rapid method for the determination of glycerine, propylene glycol(PG), sucrose, glucose, fructose and water in the casing materials using the NIR transmittance method. Hundreds of calibration samples, with extended ranges (50%, 75%, 100%, 125%, and 150% of standard addition) in each constituent, were prepared in the casing materials at the various temperatures $(25^{\circ}C\;and\;30^{\circ}C)$. Calibration equation was developed by modified partial least square (MPLS) method using second derivative. The standard error of calibration and $R^2$ between added value and NIR estimated value results were $0.007{\sim}0.034\;and\;0.996{\sim}1.000$ for the casing sample set, respectively. The standard error of prediction and R2 between added value and NIR estimated value results were $0.010{\sim}0.034\;and\;0.997{\sim}1.000$ for the casing sample set, respectively. The analysis result was not different significantly between the NIR and added value. These results show that the NIR measurement system is an effective tool to ensure quality on the casing materials.

• Journal of Ocean Engineering and Technology
• /
• v.19 no.4 s.65
• /
• pp.42-48
• /
• 2005

The sediment of Shihwa Lake contains an abundant quantity of cohesive sediments. The transport processes of the cohesive sediments are complex and difficult to predict, quantitatively. The cohesive sediments are the primary reason for the pollution of the environment and water quality in the coastal region. In this study, a column test has been performed. In order to quantify the settling velocities of sediment from Shihwa Lake, an experiment was conducted using a specially designed 1.8m tall settling column. A series of settling tests and physico-chemical property tests on Shihwa Lake cohesive sediments has been conducted to investigate the correlation between settling properties and their physico-chemical properties, which are represented as grain size distribution, mineralogical composition, and percentage oj organic contents. Experimental results of physico-chemical property tests show that Shihwa Lake sediments are relatively large in average grain $size(74\mu m)$ contain very small organic $material(6\%)$, and are dominantly composed of Quarts, which has relatively low cohesion. Thus, Shihwa Lake sediments might be specified as those whose settling properties are more influenced by gravity than cohesion. It is concluded that the magnitude of settling velocities of muddy sediments can be quite different, regionally, and it implies that field or laboratory experiments for settling velocity measurement should be preceded over the numerical modeling of muddy sediment transport, in order to obtain the reliable prediction results for a given specific site.

• KIEAE Journal
• /
• v.5 no.2
• /
• pp.11-18
• /
• 2005

The Purpose of this study is development and analysis of Effluence Characteristic of the Rainfall in the IRMA Green Roof System(developed in KICT) Plus 50 program is an internal research project at KICT(Korean Institute of Construction Technology) which has it as an object ; to lengthen the building's life 50-year or more and reduce energy conception 50% than present. Green roof system is one of the most important theme in the Plus 50 program. Generally, a Green Roof System has a positive effect on the thermal conductivity in winter, the micro cooling effect on building and city by evaporation in summer, the flood-control effect by runoff-reduction or the treated rainwater-quality of green roof system and so on. However, inspection of the physical effect of green roof system does not consider in Korea. Above all, long-term monitoring and a whole observation of green roof system is needed to probate the effect. So a new experimental method could be tried in this research, which is never attempted in Korea. The measurement by a bucket with a great volume, 1L, gives a new dimension of measuring green roof effect to measure the permanent running flood from a wide roof. This offers a reasonable result on a long-term measuring of a running water. Additionally, the thermal behavior of the IRMA(Insulated Roof Membrane Assembly), known in the western europe as a reasonable solution at green roof system by economical benefits and easy construction, would be experimented.

• Preventive Nutrition and Food Science
• /
• v.17 no.3
• /
• pp.197-202
• /
• 2012

Normal (cv. Keumkang, KK) and waxy-type (cv. Shinmichal, SMC) whole wheat flour was substituted at 20 and 40% for white wheat flour (WF) during bread dough formulation. The flour blends were subjected to dough and baking property measurement in terms of particle size distribution, dough mixing, bread loaf volume and crumb firmness. The particle size of white wheat flour was the finest, with increasing coarseness as the level of whole wheat flour increased. Substitution of whole wheat flour decreased pasting viscosity, showing all RVA parameters were the lowest in SMC40 composite flour. Water absorption was slightly higher with 40% whole wheat flour regardless of whether the wheat was normal or waxy. An increased mixing time was observed when higher levels of KK flour were substituted, but the opposite reaction occurred when SMC flour was substituted at the same levels. Bread loaf volume was lower in breads containing a whole wheat flour substitution compared to bread containing only white wheat flour. No significant difference in bread loaf volume was observed between normal and waxy whole flour, but the bread crumb firmness was significantly lower in breads containing waxy flour. The results of these studies indicate that up to 40% whole wheat flour substitution could be considered a practical option with respect to functional qualities. Also, replacing waxy whole flour has a positive effect on bread formulation over normal whole wheat flour in terms of improving softness and glutinous texture.

• Asian Journal of Atmospheric Environment
• /
• v.7 no.4
• /
• pp.209-216
• /
• 2013

This study focused on a comprehensive and detailed interpretation for the springtime air quality influenced by both artificial (particulate matter (PM) and asbestos) and biological (pollen) sources in Fukuoka Prefecture, Japan. An intensive measurement of PM was conducted at four characteristic sites (i.e., a heavy traffic area, a residential area, an industrial area, and a desolate area) in the Fukuoka Prefecture during spring of 2007. Analysis of major ionic species in $PM_{2.5}$ was performed by an Ion Chromatography, and asbestos and pollen were identified by Scanning Electron Microscopy with an energy dispersive X-ray spectrometer (EDX). $PM_{2.5}$ concentration ($65.3{\mu}gm^{-3}$) measured in an industrial area (site C) was extraordinarily high compared to those monitored in other areas; it greatly exceeded the Japan's $PM_{2.5}$ criteria (a daily average of $35{\mu}gm^{-3}$). NOAA's HYSPLIT dispersion model suggests that this high level of $PM_{2.5}$ monitored at site C is unlikely to affect the Asian continent. The ambient concentrations of $PM_{2.5}$-related anions ($NH_4{^+}$, $NO_3{^-}$, and $SO_4{^{2-}}$) and their relative contributions to $PM_{2.5}$ were also investigated in four study areas. The concentrations of these major water-soluble ions exhibit not only strong spatial dependence but also different ratios to each other. Asbestos fiber (crocidolite and amosite) concentration values changed in the range of 2.5 to 14.4 f per liter of air. The number of pollen grains showed that Cedar ranked higher in concentration than other types of pollen, with the maximum concentration at site A.

• Food Science and Biotechnology
• /
• v.14 no.5
• /
• pp.676-680
• /
• 2005

This study investigated the effect of thawing rate on the physicochemical properties of frozen ostrich meat. Five different thawing rates (0.33, 0.54, 0.61, 0.68, and 0.78 cm/h) were delivered by controlling the air velocity as heat convection at $15^{\circ}C$. The pH value decreased with increasing thawing rate (p<0.05). In color measurement, $L^*$-values of all treatments were lower and $b^*$-values higher than those of control, but $a^*$-values were not significantly different among the treatments except at the thawing rate of 0.33 cm/h. Increasing thawing rate tended to improve the water holding capacity (WHC) of the samples. Thawing loss decreased with increasing thawing rate and significantly higher cooking loss was observed at the thawing rate of 0.33 cm/h. Thiobarbituric acid reactive substance (TBARS) levels of all treatments were significantly higher than that of control (p<0.05). Increasing thawing rate tended to decrease the total volatile basic nitrogen (TVBN) value. These results indicated that a rapid thawing process at $15^{\circ}C$ improved the quality of frozen ostrich meat.