• 물과 미래
• /
• 제14권4호
• /
• pp.27-34
• /
• 1981

The design flow of the urban strom drainage systems has been assessed largely on a basis of empirical relations between rainfall and runoff, and the rational formula has been widely used for the cities in our country. In order to estimate it more accurately, the urban runoff simulation model based on the RRl method has been developed and applied to the sample basin in this study. The rainfall hyetograph of the design stromfor the design flow has been obtained by the determination of the total rainfall and the temporal distributions of that rainfall. The total rainfall has been assessed from the empirical formula of rainfall intensity and the temporal distribution of that rainfall determined on the basis of Huff's method from the historical rainfall data of the basin. The virtual inflow hydrograph to each inlet of the basin has been constructed by computing the series of discharges in each time increment, using design strom hyetograph and time-area diagram. The actual runoff hydrograph at the basin outlet has been computed from the virtual inflow hydrographs by developing a relations between discharge and storage for the watershed. The discharge data for verification of the simulated runoff hydrograph are not available in the sample basin and so the sensitivity analysis of the simulation model has not been possible. The peak discharge for the design of drainage systems has been estimated from the computed runoff hydrograph at the basin outlet and compared to thatl obtained form the rational formula.

• 상하수도학회지
• /
• 제26권6호
• /
• pp.767-777
• /
• 2012

Annular Biofilm Reactor (ABR) equipped with coupons of three different pipe materials (STS 304, PVC, PE) was used to generate drinking water biofilm samples. The level of assimilable organic carbon (AOC) during the sample generation period was $37.3{\mu}g/L$, and this level did not seem to be low enough to limit the formation of biofilm in this study. Terminal-restriction fragment length polymorphism (T-RFLP) analyses determined T-RF profile as early as 3 h of exposure on PVC coupons. Average surface roughness ($R_a$) measured by atomic force microscopic analyses was 125.7 nm for PVC, and this value was higher than for STS (71.6 nm) and PE (74.0 nm). However, biofilm formation was faster on STS (6 h) than on PE (12 h), which indicated that surface roughness might not be the only factor that controlled the initiation of biofilm development. Upon detection of the T-RF peaks, richness (S) and diversity indices such as Shannon (H) and Simpson (1/D) demonstrated a rather slow increase until 48 h followed by rapid increase regardless of the pipe materials. Differences of microbial community structures among the biofilm samples were determined based on the cluster analysis using Jaccard coefficients (Sj). Biofilm communities could be divided into two distinct groups according to the exposure time regardless of the pipe materials. First group contained a young (< 48 h) biofilm samples (10 out of 11) but second group contained a mature (${\geq}$ 48 h) samples (11 out of 14). Results suggested that, due to the complexity of biofilm, the targeting of the first group of cluster was crucial for optimizing the management of drinking water distribution systems and controlling microbial growth.

• 한국수자원학회논문집
• /
• 제40권8호
• /
• pp.643-654
• /
• 2007

본 연구에서는 도로나 도시유역에서와 같은 소유역의 배수시스템에서 적정량의 설계 규모를 결정하기 위해 지속시간 10분 이하의 강우강도-지속시간-재현기간 관계를 유도할 수 있는 방안을 제시하고 검토하였다. 본 연구에서 제시하는 방법은 모포마 분포에 근거한 것이며, 그 적용성을 서울지점 자료에 대한 적용을 통해 확인하였다 본 연구의 결과를 정리하면 다음과 같다. (1) 1분단위 강우자료를 이용하여 빈도해석을 수행한 결과 기존 건설교통부 (2000)에 의해 제시된 강우강도식은 분단위로 외삽할 수 없음을 확인하였다. (2) 60분 집성자료를 모포마 분포에 적용하여 추정한 지속시간별 분단위 연최대치 강우계열은 관측된 분단위 연최대치 강우계열의 특성을 적절히 설명할 수 있는 것으로 파악되었다. (3) 60분 집성자료와 시단위 강우자료를 이용하여 모포마 분포에 적용한 IDF 관계의 차이는 미미한 것으로 나타났다.

• 대한기계학회논문집B
• /
• 제35권5호
• /
• pp.503-511
• /
• 2011

수분류 스프레이 냉각은 $900^{\circ}C$ 이상의 고온에서 강판을 냉각하는데 매우 중요한 기술이다. 본 연구는 냉각수온이 고온 강판의 수분류 스프레이 냉각에 미치는 영향을 고찰하였다. 이 때의 열유속은 시편, 카트리지히터, 열전대의 조합으로 고안된 열유속게이지를 제작하여 엄밀하게 측정되었다. 스프레이는 fullcone 노즐로부터 생성되고 냉각실험은 일정한 스프레이 질량유속과 노즐과 표면 사이의 거리 조건에서 수행되었다. 냉각수온의 효과는 $5^{\circ}C$에서 $45^{\circ}C$까지 다섯 가지의 서로 다른 수온에 대한 수분류 스프레이 냉각의 열전달 현상을 비교 및 평가하였다. 여기서 열유속곡선과 열전달계수는 고온 강판의 냉각공정에서 실제 스프레이 냉각을 위한 기본 데이터로 활용될 수 있다.

• 한국농공학회논문집
• /
• 제64권1호
• /
• pp.27-37
• /
• 2022

This study established a water supply network based on the operation case of Mandae Reservoir in Yanggu-gun, Gangwon-do, to analyze the efficient distribution and management of agricultural water supplied from the reservoir to irrigation areas using the hydraulic analysis model SWMM. In order to construct a model to analyze the water canal network, network conditions needs to be simplified, and in particular, excessive detail or simplification of the irrigation area can lead to errors in the analysis results. Therefore, the effect of the water canal network model was analyzed by simulating the appropriate simplification process step by step. The results of simplifying the actual block shape of the analysis target area using SWMM showed that there was no significant difference in the results even if 7 lots were simplified to 2. Also, it was found that the construction and analysis of a simplified network model were reliable when the excess quantity was 2% or more compared to the required quantity for each case of analysis of the paddy field.

• ALGAE
• /
• 제26권1호
• /
• pp.41-50
• /
• 2011

Yellow Sea surface sediment samples collected on October 15-31, 2003 were analyzed using the palynological process to investigate the spatial distribution of dinoflagellate resting cysts. The sampling areas comprised four latitudinal transects, the northernmost of which was located off the Shandong Peninsula, China and the southernmost off Jeju Island, Korea. Each transect line was composed of six to nine stations, spanning the distance between the Chinese and Korean coasts. Twenty-five different types of dinoflagellate cysts were identified. Gonyaulax scrippsae, Alexandrium spp. (ellipsoidal type), and G. spinifera were the most dominant at all stations surveyed. Dinoflagellate cysts belonging to the Gonyaulacales comprised over 50% of all cysts collected. The latitudinal distribution trend showed that cyst concentrations along the two middle transects were much higher than those along the two northern and southern transects. Cyst concentrations in the offshore central areas reached their highest values within each transect and gradually decreased toward the Chinese and Korean coasts. Overall, cyst concentrations were markedly elevated in the offshore central Yellow Sea areas and gradually decreased outward in all four directions. This concentric cyst distribution pattern was consistent with the hydrographic features of the Yellow Sea, such as circular current systems, sedimentary properties, and water depth.

• 상하수도학회지
• /
• 제20권2호
• /
• pp.215-223
• /
• 2006

The internal corrosion of water distribution systems is the main cause for the problem of the public health threat as well as water leakage in the damaged pipeline, red water, and odor and taste of the tap water. This study was examined the effect of chemicals used for pH and alkalinity control and corrosion inhibitors for producing the optimal corrosion control method. Corrosion study at different pH and alkalinity indicated that these control using alkaline chemicals was effective in corrosion rate, Fe release reduction, but examined to be increased in turbidity and corrosion-by-products(TTHMs) problems. The turbidity was slightly increased, requiring caution in controlling corrosion with $Ca(OH)_2$. At pH 9.0, TTHMs concentration is increased two times corn pared with non-control of pH. Using the pipe which had experienced 28 years of exposure, iron release was decreased with the corrosion inhibitor. Consequently, pH, Alkalinity control method using alkaline chemicals must be complemented by corrosion inhibitor application for efficient corrosion control.

• Tuberculosis and Respiratory Diseases
• /
• 제82권2호
• /
• pp.94-101
• /
• 2019

Nontuberculous mycobacteria (NTM) are ubiquitous organisms that are generally found not only in the natural environment but also in the human engineered environment, including water, soil, and dust. These organisms can form biofilms and can be readily aerosolized because they are hydrophobic owing to the presence of the lipid-rich outer membrane. Aerosolization and subsequent inhalation were the major route of NTM lung disease. Water distribution systems and household plumbing are ideal habit for NTM and the main transmission route from natural water to household. NTM have been isolated from drinking water, faucets, pipelines, and water tanks. Studies that used genotyping have shown that NTM isolates from patients are identical to those in the environment, that is, from shower water, showerheads, tap water, and gardening soil. Humans are likely to be exposed to NTM in their homes through simple and daily activities, such as drinking, showering, or gardening. In addition to environmental factors, host factors play an important role in the development of NTM lung disease. The incidence and prevalence of NTM lung disease are increasing worldwide, and this disease is rapidly becoming a major public health problem. NTM lung disease is associated with substantially impaired quality of life, increased morbidity and mortality, and high medical costs. A more comprehensive understanding of the infection source and epidemiology of NTM is essential for the development of new strategies that can prevent and control NTM infection.

• Water Engineering Research
• /
• 제1권1호
• /
• pp.49-61
• /
• 2000

Magnitude-frequency relationships are used in the design of dams, highway bridges, culverts, water supply systems, and flood control structures. In this paper, possible techniques for analyzing flood frequency at a site are presented. A currently used approach to flood frequency analysis is based on the concept of parametric statistical inference. In this analysis, the assumption is make that the distribution function describing flood data in known. However, such an assumption is not always justified. Even though many people have shown that the nonparametric method provides a better fit to the data than the parometric method and gives more reliable flood estimates. the noparpmetric method implies a small probability in extrapolation beyond the highest observed data in the sample. Therefore, a remedy is presented in this paper by introducing an estimator which mixes parametric and nonparametric density estimate.

• Smart Structures and Systems
• /
• 제11권5호
• /
• pp.453-476
• /
• 2013

DuraMote is a remote sensing system developed for the "NIST TIP project: next generation SCADA for prevention and mitigation of water system infrastructure disaster". It is designed for supervisory control and data acquisition (SCADA) of ruptures in water pipes. Micro-electro mechanical (MEMS) accelerometers, which record the vibration of the pipe wall, are used detect the ruptures. However, the performance of Duramote cannot be verified directly on a water distribution system because it lacks an acceptable recordable level of ambient vibration. Instead, a long-span cable-stayed bridge is an ideal test-bed to validate the accuracy, the reliability, and the robustness of DuraMote because the bridge has an acceptable level of ambient vibration. The acceleration data recorded on the bridge were used to identify the modal properties of the structure and to verify the performance of DuraMote. During the test period, the bridge was subjected to heavy rain, wind, and a typhoon but the system demonstrates its robustness and durability.