• Resources Recycling
• /
• v.18 no.3
• /
• pp.11-19
• /
• 2009

Recently the problem of global environment is became by social issue. Accordingly the interests to recycling and saving of resources are growing from daily life to varieties field of industry. To preserve the global environment, prevent global warming, environmental destruction, environmental pollution by wastes, the drain of aggregate, plasticity energy of cement and decrease in carbon dioxide are an urgent problem that must be resolved. So there is to a field of building industry and stands but on the inside of the building the many double meaning resources usefully, applies. Also the seller masterpiece building where the service life is long planned is safe and comfortably, maintenance, suppresses the construction which is not necessary is unnecessary. Also the seller masterpiece building where the service life is long planned is safe and comfortably, maintenance, suppresses the construction which is not necessary is unnecessary. By revitalizing effective use of limited earth resources, recycling and controling production of construction waste, this study introduced to a method for Long-Term Durability of Construction Structure and Effective Use of Technology for Construction Waste considering architectural demand and earth environment. It is for reduction of an earth environment load from the side of construction production and performance design of a structure.

• Resources Recycling
• /
• v.22 no.5
• /
• pp.20-28
• /
• 2013

This study was carried out to evaluate the possibility of resource recovery for municipal solid waste(MSW) that sorted by a MBT system. First, physical property of MSW was similar to wastes carried into Sudokown landfill site. However, moisture of MSW was little higher than that. As a result of BMP test using organic fraction of MSW(OFMSWs), approximately 60 ~ 80 mL $CH_4/g$-VS of methane was occurred. Compared to the other studies, the value of methane is lower. It seems to be caused that high ratio of vinyl/plastic in OFMSWs. The other BMP test using sample of MBT system located in Sudokwon landfill was conducted each physical properties. According to the result of experiment, food waste makes 193 mL $CH_4/g$-VS, and paper is 102 mL $CH_4/g$-VS. However, there was not methane production in vinyl and rubber. Additionally, others that can't sort no more show 30 m $CH_4L/g$-VS of methane production. From the result of experimental data OFMSWs has high fraction of vinyl, rubber and other substance that difficult for biodegradation. Therefore it is need to sort of them.

• Korean Chemical Engineering Research
• /
• v.45 no.4
• /
• pp.311-318
• /
• 2007

Soil contamination in Korea has been accelerated every year. Because of their persistence and cumulative tendency in the environment, soil contaminants have potential long-term environmental and health concerns and it is estimated to cost enormous expense for clean-up. Korea government has legislated the law on conservation of soil environment in mid 1990s, and managed and treated hazardous wastes in contaminated sites as a remediation policy since then. Soil remediation technologies are classified into in-situ/ex-situ or biological/physico-chemical/thermal processes according to applied places or treatment methods, respectively. In Korea, clean-up of polluted sites has been mostly carried out at military areas, railroad-related sites and small-scale oil spilt sites. For these cases, in-situ remediation technologies such as soil vapor extraction (SVE) and bioventing were mainly used. In recent days, an environmental-friendly soil remediation emerged as a new concept - for example, a new soil remediation process using nanotechnology or molecular biological study and an integrated process which can overcome the limitation of individual process. To have better applicability of remediation technologies, comprehensive understandings about the pollutants and soil characteristics and the suitable techniques are required to be investigated. Above all, development of environmental technologies based on the sustainability accompanied by public attention can improve soil environment in Korea.

• Journal of Environmental Health Sciences
• /
• v.33 no.3
• /
• pp.217-226
• /
• 2007

The purpose of this study is to estimate the emission factor of $non-CO_2$ global warming gases such as $N_2O$ and $CH_4$ by measuring concentrations from stacks of waste incinerators and cement production plants. Based on the established monitoring methods, $N_2O$ concentration measured from stacks in incinerator were between 0.62 and $40.60\;ppm_v$ (ave. $11.50\;ppm_v$). The concentration of $N_2O$ was dependent on the incinerator types. However, the concentrations of $CH_4$ gas were between 2.65 and $5.68\;ppm_v$ (ave. $4.22\;ppm_v$), and did not show the dependency on the incinerator types. In the cement production plant, the concentration ranges of $N_2O$ from the stack were from 6.90 to $10.80\;ppm_v$ (ave. $8.60\;ppm_v$), and $CH_4$ were between 1.80 and $2.20\;ppm_v$ (ave. $2.60\;ppm_v$). Using measured concentrations, the emission amounts of $N_2O$ and $CH_4$ from stacks per year were calculated. The results were is 4.2 ton $N_2O/yr$ in the incinerators, and 53.7 ton $N_2O/yr$ in the cement facilities. The big difference is from the flow rate of flue gas in the cement facilities compared to the incinerators. By the same reason, the $CH_4$ emission amounts in cement plant and incinerator was found to be 339 ton $CO_2/yr$ and 34.1 ton $CO_2/yr$, respectively. Finally, the emission factor of $N_2O$ in the incinerators were calculated using the measured concentration and the amount of incinerated wastes, and was $42.5\sim799.1\;g/ton$ in kiln and stoker type, $11.9\sim79.9\;g/ton$ in stoker type, 90.1 ton/g in rotary kiln type, 174.9 g/ton in fluidized bed type, and 63.8 g/ton in grate type, respectively. Also, the emission factors of $CH_4$ were found to 65.2-91.3 g/ton in kiln/stoker type, 73.9-122 g/ton in stoker type, 109.5 g/ton rotary kiln, and 26.1 g/ton in fluidized bed type. This result indicates that the emission factor in incinerators is strongly dependent on the incinerator types, and matched with result of IPCC (International Panel on Climate Change) guideline.

• Spatial Information Research
• /
• v.22 no.6
• /
• pp.33-43
• /
• 2014

As the number of people who live indoor space has been increased, the interest in 3D indoor spatial information has been grown. Object-Oriented 3D indoor space modeling including indoor spatial information has performed in level of detail 4, and modeling data is able to be constructed based on various raw data which are as-built drawing, laser scanning, BIM data, and camera. 3D indoor space modeling has been worked based on established indoor space modeling process, and the result can be used for various application fields such as indoor space pedestrian navigation, facility management, disaster management, and so on. However, the modeling process has limitations to perform indoor space modeling efficiently, because the process is complicated and wastes time at modeling work. In this paper, we propose evaluation on practical use of raw data for 3D indoor space modeling purpose on supporting efficient indoor space modeling through analyzing the established process. Therefore, we define the requirements to evaluate the practical use of raw data and propose the verification method. In addition, as-built drawing which has been used in Seoul 3D indoor space modeling project will be applied to proposed method as a raw data.

• The Journal of Natural Sciences
• /
• v.5 no.1
• /
• pp.67-75
• /
• 1992

In the our country, especially in Yeongil and Wolsung area, abundant authigenic zeolites are found from the tuffaceous sediments and volcanic rocks of Miocene age showing wide variation in their mineralogy and abundance from horizon to horizon. The principal zeolite species identified are clinopti-lolite. mordenite. heulandite. ferrierite, and erionite. etc. Zeolite minerals are widely used in many countries in the following applications; (a) in air separation adsorption processes; (b)as desiccants; (c)in inorganic building materials; (d)in papermaking; (e)in fertilizers; (f)as soilconditioners-this application is based upon the ability of the zeolite to ion exchange with soil nutrients; (g)in the treatment of radioactive wastes; and (h)as adsorbents for toxic gases, etc. In the present paper, using natural zeolite mordenite treated with IN hydrochloric acid or IN sodium chloride solution as column packings, separation characteristics of argon, nitrogen, carbon monoxide, and methane gases have been studied by gas chromatography. By the use of mordenite treated with hydrochloric acid solution, the tailing peak of methane showed from untreated mordenite was satisfactorily reduced, although it was difficult to separate it from carbon monoxide with a column activated at $300^{\circ}C$. Using a column activated at $350^{\circ}C$, methane could be separated from carbon monoxide easily but only carbon monoxide eluted as a bad defined peak. Mordenite treated with sodium chloride solution was generally similar to chromatograms obtained by using the untreated mordenite. Both the above chemical treatments of mordenite had little effect on the separations of argon and nitrogen. The separations and the HETP values obtained from natural zeolite mordenite treated with continuously hydrochloric acid and sodium chloride solutions were almost identical with those obtained with synthetic molecular sieve 5A zeolite. On the other hand, the efficiency of column was good in the range 20~3Oml/min of the carrier helium gas rate.

• The Korean Journal of Mycology
• /
• v.19 no.1
• /
• pp.79-84
• /
• 1991

Fruit bodies of Ganoderma lucidum have been used for most pharmacological studies, but pharmacological effects are likely variable because the habitats and strains of Ganoderma lucidum are different. Therefore, their fermentation is required to produce constant and reliable pharmacolo­gical constituents from Ganoderma lucidum. During the studies of medium for industrial application. it was found that ginseng root residues, remaining after being extracted with ethanol, were a good carbon source for a fermentation of Genoderma lucidum and a corn steep liquor was also economical for the nitrogen source. Yield of the mycelial cultured in ginseng root residues and corn steep liquor was 2.5 times higher than that in glucose and peptone, known as a conventional medium of Ganoderma lucidum. The polysaccharide content of the extracts from the cultured mycelia was higher than that from fruit bodies, but protein content was vice versa. Extracts of the cultured mycelia were more effective and lasting than extracts of the fruit bodies in decreased hypertention of spontaneously hypertensive rats (SHR).

• The Korean Journal of Mycology
• /
• v.31 no.3
• /
• pp.200-205
• /
• 2003

The study was carried out on the artificial cultivation of the abalone mushroom, Pleurotus cystidiosus O.K.Miller. The pine sawdust substrates with 20% rise bran were good for mycelial growth and high quantity of P. cystidiosus in the bottle cultivation. Moreover, the proper volume for bottle cultivation was 850 ml and the removal of spawn and surface layer of the medium before pin-heading was more efficient. The yields of P. cystidiosus were higher in sawdust substrates added calcium carbonate than those not added calcium carbonate. The volume of 3 kg polypropylene bag is good for yield and biological efficiency in bag cultivation of P. cystidiosus. Cotton wastes were proper substrates for bag cultivation. In the effect of different cultivation temperature, $28{\pm}2^{\circ}C$ cultivation temperature was good for for primordial formation after inoculation.

• Hwankyungkyoyuk
• /
• v.5 no.1
• /
• pp.112-137
• /
• 1993

As the concern with the creation of environmental problems and regulations about them becomes internationally growing, environmental cooperations with countries concerned are emerging as the first item on the political agenda. In case of South Korea, cooperations with countries in the Asian region is needed urgently. In particular, cooperations with North Korea will be an important factor to reunify the Korean peninsula as well as to solve environmental problems in South Korea. Accordingly, it is necessary to seek feasible alternatives and possibilities of coping with international environment in South and North Korea. This study is limited to literature study based on collecting materials and the testimony of former residents in North Korea. The period of study ranges from May to December in 1992. The research findings show the following environmental problems and alternatives : It is recognized in South Korea that the creation of environmental problems is product of economic development. Currently, the Korean government makes an effort to revise environmental administration and law, to encourage environmental education, and to proceed with environmental technology policies by establishing environmental policies together with economic development plans. North Korea ascribes the cause of environmental problems to colonial exploitation by Japan and the U.S. Environmental pollutants in North Korea is relatively less than South Korea, provisions such as environmental conservation movement, environmental education, and environmental administration and law are not well organized in the country. However, North korea will speed up its economic development to solve economic crises. Therefore, it is expected that industrial wastes, corrosion of nature, and water pollution will result in serious environmental problems. The fields expected to cooperate with South and North Korea are in the following : South Korea may adopt the model of the former East and West Germany and proceed to cooperate with North Korea in public sector as well as private sector. The possible programs are such as academic exchange to conserve environment, joint research in the area of the Demilitarized Zone, conservation of ecosystems around Imjin and Pukhan Rivers, South Korea's support of advanced environmental technology and industrial and financial aid to North Korea. Conflicts between countries concerned in the North East Asian region will be caused by the responsibilities of pollutions because of the seashore development of the Yellow Sea by South Korea and increasing seashore industrial complexes around the Yellow Sea in China, Therefore, it is desirable that the two countries will participate in organizations related to environment. Joint projects between South and North Korea will be as follows : 1. Construction of long-range monitoring system : 2. Investigation of the state of pollutions around the Yellow Sea and alternatives : 3. Construction of joint monitoring system to regulate the movement of pollutants : 4. Cooperation of environmental technology and exchange of information ; and 5. Support of Cooperation of environment in private sector. Efforts to cooperate with North korea is expected to overcome differences between the two countries as well as to encourage unification of the korean peninsula, which will lead to reducing the cost of environmental recovery. These efforts will also contribute to the maintenance for peace and stability on the korean peninsula as well as in the North East Asian region.

• Membrane Journal
• /
• v.21 no.4
• /
• pp.367-376
• /
• 2011

Huge amount of $CH_4$ mixtures has been emitted from landfills and organic wastes via anaerobic digestion. The recovery of high purity $CH_4$ from these gases has two merits: reduction of green house gases and production of renewable fuels. Membrane technology based on polymeric materials can be used in this application. In this study, asymmetric gas separation hollow fiber membranes were fabricated to develop the membrane-based bio-gas purification process. Polyethersulfone (PES) was chosen as a polymer materials because of high $CO_2$ permeability of 3.4 barrer and $CO_2/CH_4$ selectivity of 50[1]. Acetone was used as a non-solvent additive because of its unique swelling power for PES and highly volatile character. The prepared PES hollow fiber showed excellent separation properties: 36 GPU of $CO_2$ permeance and 46 of $CO_2/CH_4$ selectivity at optimized preparation conditions: 9wt% acetone content, 10cm air-gap and 4wt% PDMS coating processes. With the PES hollow fiber membranes developed, mixed $CO_2/CH_4$ test was done by changing various operating conditions such as pressures and feed compositions to meet the highest recovery of CH4 with 95% purity. High $CH_4$ recovery of 58 wt% was observed at 10 atm feed pressure for the 50 vol% of $CO_2$ in $CO_2/CH_4$ mixture.