• Resources Recycling
• /
• v.26 no.5
• /
• pp.29-38
• /
• 2017

This study suggests optimal policy options for collection of used diapers through benchmarking of foreign countries and perception surveys. By conducting a survey, this study can identify the actual problems involved in the collection process and enhance the social acceptance toward diaper recycling policies. As a perception survey result, the economic burden of emission bags and sanitary issues were most important for the collection pilot test. Respondents thought that twice-a-week collection frequency was appropriate and that free emission bags might be preferable to participants. Currently municipal wastes are subject to waste management laws, which are applied by local governments. Diaper waste is categorized with municipal waste, so it seems to be treated by municipal waste systems. In terms of connection with government, possible alternatives were suggested to identify the relevant local government. Useful data could be obtained, to determine the economical viability of any future diaper recycling system implementation in the entire Seoul metropolis and adjacent areas of dense population.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.12 no.1
• /
• pp.29-34
• /
• 2009

For several decades, many researchers have been involved in developing recycling methods for FRP boats. There are four basic classes of recycling covered in the literature. Despite of environmental problems(safety hazards), mechanical recycling of FRP boats, which involves shredding and grinding of the scrap FRP, is one of the simpler and more technically proven methods than incineration, reclamation or chemical ones. Because FRP is made up of reinforced fiber glass, it is very difficult to break into pieces. It also leads to secondary problem in recycling process, such as air pollution and unacceptable shredding noise level. Another serious problem of mechanical FRP recycling is very limited reusable applications for the residue. This study is to propose a new and efficient method which is more wide range applications and environment friendly waste FRP regenerating system. New system is added with the cyclone sorting machine for airborne pollutions and modified cutting system for several glass fiber chips sizes. It also has shown the FRP chip fiber-reinforced concrete and fiber-reinforced secondary concrete applications with the waste FRP boat to be more eligible than existing recycling method.

• Environmental Engineering Research
• /
• v.24 no.1
• /
• pp.117-126
• /
• 2019

Activated carbon is carbon produced from carbonaceous source materials, such as coconut shells, coals, and woods. In this study, an activated carbon production system was analyzed by carbonization and activation in terms of environmental impact and human health. The feedstock of wood wastes for the system reduced fossil fuel consumption and disposal costs. Life cycle assessment methodology was used to analyze the environmental impacts of the system, and the functional unit was one tonne of wood wastes. The boundary expansion method was applied to analyze the wood waste recycling process for activated carbon production. An environmental credit was quantified by avoided impact analysis. Specifically, greenhouse gases discharged from 1 kg of activated carbon production system by feeding wood wastes were evaluated. We found that this system reduced global warming potential of approximately $9.69E+00kg\;CO_2-eq$. compared to the process using coals. The environmental benefits for activated carbon production from wood wastes were analyzed in contrast to other disposal methods. The results showed that the activated carbon system using one tonne of wood wastes has an environmental benefit of $163kg\;CO_2-eq$. for reducing global warming potential in comparison with the same amount of wood wastes disposal by landfilling.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.11 no.1
• /
• pp.50-54
• /
• 2008

There are several basic classes of recycling methods for FRP boats. The main one is 'Mechanical recycling' which involves shredding and grinding of the scrap FRP in a new product. That is one of the simpler and more technically proven methods. It recently has been reported that FRP can be recycled by separating into layers instead of crushing into powder. Many researchers should be more interested in these mechanical recycling for the eligibility. Nevertheless, because resins is very useful renewable energy, most of waste FRP regenerating methods depend on incineration (reclamation) or thermal recycling (pyrolysis). FRP is made up of laminated glass- fiber (roving cloth layer) which is also very unlikely to break into each layer. If there is an extracting method which is efficient and environment friendly removing glass fiber from waste FRP, it should also solve the another urgent problem. Laminated glass-fiber which is very limited renewable, is a serious barrier to wast FRP boat regenerating. This study is to propose a new extracting method which is efficient and environment friendly waste FRP regenerating system. And it should be applied to renewable energy applications with the waste resins of FRP. Also recycling glass fiber obtained by the separation of the roving layer from waste FRP will be consider to be useful for concrete products or structures.

• Environmental Analysis Health and Toxicology
• /
• v.19 no.3
• /
• pp.315-320
• /
• 2004

Environmental waste treatment technology is transforming from incineration system to pyrolysis gasification system. And there it is necessary for our country to adapt gasification system urgently to prevent the land pollution and lack of landfill area. The objective of this study was to determine the pesticides residues of derived product of pyrolysis gasification system for recycling of waste plastic by gas chromatograph-mass selective detector and nitrogen phosphorus detector. The residual pesticides were not detected in derived product of waste recyling. But some pesticide was detected on raw level (0.02 ～ 0.05 ppm) in waste plastic sample.

• Journal of Wetlands Research
• /
• v.1 no.1
• /
• pp.7-16
• /
• 1999

The objective of this study is to recover the contaminated ditch by using a biofilter filled up with waste-concrete media and vegetation bed. Two systems were tested for elimination of organic compounds, turbidity, nitrogen and phosphate. System 1 is three-stage system which consisted of one biofilter and two vegetation bed, system 2 has three-stage system consisted of one biofilter, one vegetation bed (four bed), and one media trench operated in series. In system 1, HRT of biofilter was 4 hour, and Oenanthe javanica was planted in two vegetation bed. In system 2, HRT of biofilter was varied 2 hours and Persicaria chinensis was planted on the top of the biofilter. And Oenanthe javanica, Hydrocharis asiatica, Salvinia natans were planted in four bed of a vegetation bed and the second vegetation bed of system 1 was rebuilt to a media trench bed. The elimination rate of BOD and turbidity was over 90% in both systems. The mean elimination rates 40~50%(system 1), 30~40%(system 2) for T-N and 40~50% (system 1), 30~40%(system 2)for T-P. T-N and T-P elimination performance of system 1 was a little higher(10%) than that of system 2. Results showed that vegetation bed are not efficient in reducing T-N and T-P. It was considered that HRT of vegetation bed of both systems was much lower(1~2hr) than that of conventional system(5~20days).

• Proceedings of the Korean Institute Of Construction Engineering and Management
• /
• 2007.11a
• /
• pp.774-780
• /
• 2007

Occurrence amount of construction waste dominates weight that is the most as 44.6% if examine domestic waste occurrence present condition, scales of construction becomes jumbo gradually depending on social environment that change and occurrence amount of construction waste is steadily increasing real condition. Construction waste processing and recycling expense have held about 0.5% to 1% of whole construction cost, but if do not manage construction waste efficiently in each construction site, ratio that construction waste processing and recycling expense hold in whole construction cost is expected that will rise more. This does hint that environmental harm and economical damage are serious by construction waste. In this study, system is activated in each construction site at information interchange system and waste electron succession and waste government official makes radio frequency realization technology (RFID) purpose suggest plan that can be applied efficiently through example analysis that a RFID technology is already applied by efficiently attained plan.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.26 no.1
• /
• pp.13-19
• /
• 2018

25 local districts in Seoul have been running Waste Transfer Stations(WTSs) to secure regional collection bases, to connect between collection systems and waste treatment systems, and to commit various pre-screening of mixed wastes. There were, however, few previous researches to define how much WTSs are beneficial to waste collection system at least in Korea. So this study analyzed costs of waste collection systems with varied haul distances from waste sources(WSs) to WTS or building types of WTSs. Major results showed that the closer WTS is to WS or the cheaper the construction cost of WTS is, the lower the cost of waste collection system is. There was an additional result that WTS system with more than 15 km of total haul distance might be useful in Seoul and encapsulation of WTS in building or underground will make effective total haul distances longer up to 35km.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.11 no.3
• /
• pp.251-259
• /
• 2023

In this study, as a foundational research aimed at promoting the efficient recycling and environmentally friendly disposal of construction waste through the activation of a selective dismantling system, our primary objective was to analyze the economic feasibility of implementing selective dismantling. To achieve this, we conducted an assessment on a 5-story residential building with a construction area of 2,400 m² as a case study. When considering the additional cost of dismantling construction ① the reduction in waste disposal costs due to decreased mixed waste, ② and the potential revenue from recycling through the separation and sorting of waste materials, and ③ we were able to comprehensively confirm that there is an expected cost-saving effect totaling 34,727,000 KRW when compared to conventional demolition methods.

• Proceedings of the Korean Radioactive Waste Society Conference
• /
• 2017.05a
• /
• pp.73-74
• /
• 2017