• Korean Journal of Ecology and Environment
• /
• v.52 no.3
• /
• pp.179-191
• /
• 2019

Heavy metals in stream water and sediments around industrial complex were studied in order to assess the contamination and to identify the potential source of metals. High variability has been observed for both dissolved and particulate phases in stream water with coefficient of variation (CV) ranging from 1.3 to 2.8. The highest metal concentrations in both phases were observed in Gunja for Ni and Cu, in Jungwang for Zn and Pb and in Shiheung for Cd, respectively. These results indicate that the different metal sources could be existing. The concentrations of the heavy metals in sediments decreased in the order of Cu>Zn>Pb>Cr>Ni>As>Cd>Hg, with mean of 2,549, 1,742, 808, 539, 163, 17.1, 5.8, $0.07mg\;kg^{-1}$, respectively. Mean of metal concentrations(except for As) in sediments showed the highest values at Shiheung stream comparing with other streams. In sediments, the percent exceedance of class II grade that metal may potentially harmful impact on benthic organism for Cr, Ni, Cu, Zn, Cd, Pb was about 57%, 62%, 84%, 60%, 68%, 81% for all stream sediments, respectively. Sediments were classified as heavily to extremely polluted for Cu and Cd, heavily polluted for Zn and Pb, based on the calculation of Igeo value. About 59% and 35% of sediments were in the categories of "poor" and "very poor" pollution status for heavy metals. Given the high metal concentrations, industrial wastes and effluents, having high concentrations of most metals originated from the manufacture and use of metal products in this region, might be discharged into the stream through sewer outlet. The streams receive significant amounts of industrial waste from the industrial facilities which is characterized by light industrial complexes of approximately 17,000 facilities. Thus, the transport of metal loads through streams is an important pathway for metal pollution in Shihwa Lake.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.46 no.5
• /
• pp.626-637
• /
• 2013

We measured the grain size, ignition loss (IL), chemical oxygen demand (COD), acid volatile sulfide (AVS) and trace metals (Al, Fe, Cu, Pb, Zn, Cd, Cr, Mn, Hg, and As) of intertidal surface sediment collected from 11 islands (62 stations) in the southern region of Jeollanam Province. The objective of this research was to evaluate the organic matter and trace metals contaminations of sediments from coastal island tidal flats. Surface sediment texture was characterized as follows: mud, sandy silt, muddy sand, and slightly gravelly sand facies. The finer sediments are mainly dominated in the northern part of each island. The concentrations of IL, COD, AVS and some trace metals (Al, Fe, Zn, Cr, Cu, and Hg) were higher in the northwestern part of Wan Island and the area between Gogeum and Sinji Islands, and were associated with relatively finer sediment, as compared to other locations. The concentrations of Mn, Pb, Cd, and As were higher in the northwestern and southeastern parts of Geoguem and Pyungil Islands, but were not correlated with mean grain size. Based on sediment quality guidelines (SQGs), the concentrations of trace metals were lower than the values of effect range low (ERL), used in United States, and threshold effects level (TEL), used in Korea, with exception of As. Similarly, the intertidal sediments were moderately contaminated with As, based on the the enrichment factor (EF) and the geoaccumulation index ($I_{geo}$). The high concentration of As in intertidal sediments from this study region may be due to the input of naturally or artificially contaminated submarine groundwater, contaminated waste from seaweed aquaculture operations and/or land-based seaweed processing facilities. Further studies are needed to identify the sources of As in this study region, and to determine the effects of As contamination on coastal ecosystem.

• Journal of Food Hygiene and Safety
• /
• v.13 no.1
• /
• pp.34-40
• /
• 1998

Chitin is known as biodegradable natural polymer. But, in spite of various application of chitin from waste marine sources, commercial use of chitin has been limited due to highly resistance to chemicals and the absense of proper solvents. Therefore, we studied that another viscosity chitosan were prepared from chitin which were deacetylated under various concentration of NaOH solution, reaction time and temperature by the application of Mirna's method. The major parameters for these manufacturing methods were found to be concentration of alkali solution, reaction time and temperature etc. Besides, we studied that various chitosan derivatives were prepared from chitin by crosslinkage with epichlorohydrin and 1,3-dichloropropanol. The effects of these parameters on another viscosity(molecular weight) chitosan and crosslinked chitosan dervatives were investigated by various analysis apparatus. SEM analysis showed that both chitin and chitosan had a particle shaped morphology and another molecular weight chitosan according to the particle size was much smaller than that of chitin.

• Environmental Engineering Research
• /
• v.23 no.3
• /
• pp.250-257
• /
• 2018

We developed new composites by combining the solid waste from Low-Density Polyethylene in the form of plastic bag (PB) and biomass from rice husk (RH),in the form of $(RH)_x(PB)_{1-x}$ (x = (1, 0.9, 0.7, 0.5)), as alternative fuels for electrical energy sources, and for providing the best solution to reduce environmental pollution. Elemental compositions were obtained by using proximate analysis, ultimate analysis, and X-ray fluorescence spectroscopy, and the thermal characteristics were obtained from thermogravimetric analysis. The compositions of carbon and hydrogen from the ultimate analysis show significant increases of 20-30% with increasing PB in the composite. The activation energy for RH is 101.22 kJ/mol; for x = 0.9 and 0.7, this increases by 4 and 6 magnitude, respectively, and for x = 0.5, shows remarkable increase to 165.30 kJ/mol. The range of temperature of about $480-660^{\circ}C$ is required for combustion of the composites $(RH)_x(PB)_{1-x}$ (x = (1, 0.9, 0.7, 0.5)) to perform the complete combustion process and produce high energy. In addition, the calorific value was determined by using bomb calorimetry, and shows value for RH of 13.44 MJ/kg, which increases about 30-40% with increasing PB content, indicating that PB has a strong effect of increasing the energy realized to generate electricity.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.12 no.4 s.27
• /
• pp.293-300
• /
• 2006

Domestic laws such as Korea Marine Pollution Prevention Law (KMPPL) which has been mae and amended according to the conclusions and amendments of various international conventions for the prevention a marine pollution such as MARPOL 73/78 were reviewed and compared with the major contents of the relevant international conventions. Alternative measures for legislating new laws or amending existing laws such as KMPPL for the acceptance of major contents of existing international conventions were proposed. Annex VI of MARPOL 73/78 into which the regulations for the prevention of air pollution from ship have been adopted has been recently accepted in KMPPL which should be applied to ships which are the moving sources of air pollution at sea rather tlnn in Korea Air Environment Conservation Law which should be applied to automobiles and industrial installations in land. The major contents of LC 72/95 have been accepted in KMPPL However, a few of substances requiring special care in Annex II of 72LC, a few of items in characteristics and composition for the matter in relation to criteria governing the issue of permits for the dumping of matter at sea in Annex III of 72LC, and a few of items in wastes or other matter that may be considered for dumping in Annex I of 96 Protocol have not been accepted in KMPPL yet. The major contents of OPRC 90 have been accepted in KMPPL. However, oil pollution emergency plans for sea ports and oil handling facilities, and national contingency plan for preparedness and response have not been accepted in KMPPL yet. The waste oil related articles if Basel Convention, which shall regulate and prohibit transboundary movement of hazardous waste, should be accepted in KMPPL in order to prevent the transfer if scrap-purpose tanker ships containing oil/water mixtures and chemicals remained on beard from advanced countries to developing and/or underdeveloped countries. International Convention for the Control if Harmful Anti-Fouling Systems on the Ships should be accepted in KMPPL rather tlnn in Korea Noxious Chemicals Management Law. International Convention for Ship's Ballast Water/Sediment Management should be accepted in KMPPL or by a new law in order to prevent domestic marine ecosystem and costal environment from the invasion of harmful exotic species through the discharge of ship's ballast water.

• Journal of Marine Bioscience and Biotechnology
• /
• v.7 no.1
• /
• pp.1-10
• /
• 2015

Bio diesel has advantages to reduce GHG(Greenhouse Gas) compare with the fossil fuel by using oil comes from plant/animal sources and even waste such as used cook oil. The diversity of energy feeds brings the positive effects to secure the national energy mix. In this circumstance, micro-algae is one of the prospective source, though some technical barriers. We analyzed the bio diesel which was derived from Dunaliella tertiolecta LB999 through the BD100 quality specifications designated by the law. From that result, it is revealed that the oxidation stability is one of the properties to be improved. In order to find the reason for low oxidation stability, we analyzed the oxidation tendency of each FAME components through some methods(EN 14111, EN14112, EN16091). In this study, we could find the higher double bond FAME portion, the more oxidative property(C18:1${\ll}C18:3$) in bio diesel and main unsaturated FAME group is acted as the key component deciding the bio diesel's oxidation stability. It is proved experimentally that C18:3 FAME are oxidized easily under the modified accelerated oxidation test. We also figure out low molecular weight hydrocarbon and FAME were founded as a result of thermal degradation. Some alcohol and aldehydes were also made by FAME oxidation. In conclusion, it is necessary to find the way to improve the micro-algal bio diesel's oxidation stability.

• Journal of fish pathology
• /
• v.18 no.2
• /
• pp.187-195
• /
• 2005

Effluent of aquaculture industry has caused a growing concern regarding its environmental impact. We assessed the use of flounder farming sewage as supplement of diet, to minimize the impact of aquaculture on the environment or also establish the technique for the recycling of effluent sediment derived from land-based seawater fish farm. In order to investigate the effects of a fermented aquaculture waste on biochemical responses of olive flounder (Paralichthys olivaceus), fermented products of aquaculture wastes were used as test compounds that cause hepatic and renal stress through the induction of oxidative stress in liver and kidney. Hepatosomatic index (HSI), glutathione content and glutathione dependent enzyme were not significantly different and no correlation was found within the different types of fermentation condition or supplement concentration, except for significant increases in 50% fermentation group and 50% concentration group in case of glutathione peroxidase activity and HSI value, respectively. These results showed addition of fermented aquaculture sewage may be an economic artificial sources of diet for fish aquaculture practices without affecting the function and safety in view of biochemical examination.

• Applied Chemistry for Engineering
• /
• v.4 no.1
• /
• pp.204-215
• /
• 1993

Epoxy-activated chitin was synthesized by the reaction of epichlorohydrin with chitin which was isolated from waste marine sources such as crab shell. Followed by the reaction of epoxy-activated chitin with hexamethylenediamine, the aminohexyl chitin was synthesized. The aminohexyl chitin was subsequently reacted with epichlorohydrin to prepare the epoxy-activated aminohexyl chitin. Finally, the tannin-immobilized chitin (Resin I) was synthsized by the reaction of tannin solution with epoxy-activated aminohexyl chitin. Using silane coupling agent, the tannin-immobilized chitosan(Resin II) was synthesized by the reaction of $\gamma$-glycidoxypropyltrimethoxy silane with chitosan which was prepared by the deacetylation of chitin. Upon the pH variation, adsorptivities of these immobilized tannins to the metal ions such as $Cu^{+2}$, $Ni^{+2}$, $Cr^{+6}$, $Co^{+2}$, $Ca^{+2}$, $Pb^{+2}$, $Ba^{+2}$, and $UO_2{^{+2}}$ ions were determined by batch method. The adsorptivity tendencies of these immobilized tannin to the most of metallic ions were increased with pH. Furthermore, the adsorptivities of Resin(I) and Resin(II) upon the variation of pH, contact time, amount of resin and concentration of metal ion were investigated. As a result, it was found that these immobilized tannin on both chitin and chitosan showed good adsorptivities for uranyl ion.

• Korean Journal of Ecology and Environment
• /
• v.48 no.3
• /
• pp.147-152
• /
• 2015

Nitrogen (N) loading from domestic, agricultural and industrial sources can lead to excessive growth of macrophytes or phytoplankton in aquatic environment. Many studies have used nitrogen stable isotope ratios to identify anthropogenic nitrogen in aquatic systems as a useful method for studying nitrogen cycle. In this study to evaluate the precision and accuracy of Kjeldahl processes, two reference materials (IAEA-NO-3, N-1) were analyzed repeatedly. Measured the ${\delta}^{15}N-NO_3$ and ${\delta}^{15}N-NH_4$ values of IAEA-NO-3 and IAEA-N-1 were $4.7{\pm}0.2$‰ and $0.4{\pm}0.3$‰, respectively, which are within recommended values of analytical uncertainties. Also, we investigated spatial patterns of ${\delta}^{15}N-NO_3$ and ${\delta}^{15}N-NH_4$ in effluent plumes from a waste water treatment plant in Han River, Korea. ${\delta}^{15}N-NO_3$ and ${\delta}^{15}N-NH_4$ values are enriched at downstream areas of water treatment plant suggesting that dissolved nitrogen in effluent plumes should be one of the main N sources in those areas. The current study clarifies the reliability of Kjeldahl analytical method and the usefulness of stable isotopic techniques to trace the contamination source of dissolved nitrogen such as nitrate and ammonia.