• Journal of the Korean Society of Food Culture
• /
• v.17 no.3
• /
• pp.252-259
• /
• 2002

The purpose of this study examined important factor of performance on Contract Foodservice management. Three contract Foodservice companies were selected which were located in Seoul & kuonggi province. 300 units were chose. The questionnaire was composed of seven part. There were the operation of food management, the operation of menu, the operation of equipment and facilities management, the operation of solid waste and safety management, the operation of waiting time management. As a result of the survey B&I foodservice was listed higher than University foodservice as food hygiene, FIFO and food shelf life. University foodservice employees worked 4 hour longer than B&I foodservice employees, so turnover rate was higher than it. Comparing the number of feeding, B&I foodservice equipment and facilities scale was bigger than University foodservice equipment and facilities. The rate of solid waste on B&I foodservice was 11.468% and the rate of University foodservice was 16.23%, the waiting time of University foodservice was about 8mins longer than B&I foodservice.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.26 no.11C
• /
• pp.133-139
• /
• 2001

The economical detection of dual-tone multi-frequency(DTMF) signals is an important factor when developing cost-effective telecommunication equipment. Each channel has independently a DTMF receiver, and it informs the detected signal to processors. In order to detect the DTMF signals, this paper analyze the power spectra of the DTMF receiver by using the QFT algorithm. As experimental result, by analyzing 2$\^$M/ real data in terms of ITU-T specification, it show that the QFT algorithm improve the performance of the DTMF receiver and can save memory waste and can the real-time processing.

• Journal of Institute of Control, Robotics and Systems
• /
• v.12 no.12
• /
• pp.1209-1214
• /
• 2006

This paper presents an application of Dividing Wall Column(DWC) to the recovery of the waste solvent from the film making processes. The waste solvent feed contains MEK(Methyl-Ethyl-Ketone), Toluene, Cyclohexanone, and water. The commercial software $HYSYS^{TM}$ was used for rigorous simulation and analysis. Sensitivity analysis for several major design variables were carried out to achieve the optimal design of the process. Distribution of the internal vapor and liquid flows to the prefractionator and main sections is shown to be the most dominant design factor for energy saving efficiency in the DWC process. The simulation results also show that the solvent recovery process using the DWC significantly improves both the energy efficiency and the compactness of the solvent recovery process.

• Advances in environmental research
• /
• v.6 no.1
• /
• pp.25-33
• /
• 2017

This paper discussed plurality in urban governance in Nigeria and its implication on delivery of urban environmental services, with a focus on water supply, sanitation and solid waste disposal. Conceptually, it explained urban governance as the sum total of the ways of achieving an inclusive city and expressed the urban governance system of Nigeria based the legal framework set for them. The paper explored the environmental implications of urban governance in Nigeria. It concluded that urban governance has several implications on delivery of urban environmental services in Nigeria. The dualism in urban governance is a factor contributing towards inefficient delivery of environmental services such as water supply, sanitation and solid waste management in Nigeria. The paper recommended, among others, a constitutional reform that will guarantee efficient urban governance and delivery of environmental services in Nigeria.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.18 no.1
• /
• pp.45-52
• /
• 2023

The power generation method using expensive diesel has operation problems such as high cost diesel generator and a lack of reserved power due to increase of power demand in some islands, requiring expansion of power generation facilities. To solve this problems, it is necessary to improve the efficiency of power generation facilities through an ORC(Organic Rankin Cycle) system application that uses waste heat as a heat source. Therefore, localized application technology of price competitive and highly reliable ORC power generation system is needed, and optimization technology of generators is having great effect, so this study performed two generator designs to get a high-efficiency generator with an optimized 30kW output. The comparison of simulation data for two designed models showed that a generator with SPM factor of 46.2% had an efficiency of 92.1% and a power ouput of about 23.2kW based on 12,000rpm, a generator with SPM factor of 44.46%, had a power output of 27.9kW and efficiency of 93.6% based on above rpm. For the verification of improved design model with SPM factor of 44.46%, the prototype test system with 110kW motor dynamometer was installed and got to the efficiency of 92.08% with conditions of the rated capacity 25kW at 12,000rpm, the test results of prototype generator showed the validity of generator design.

• Journal of Korean Society of Environmental Engineers
• /
• v.36 no.12
• /
• pp.865-872
• /
• 2014

The study was conducted to evaluate the effect of addition of food waste in brown water for anaerobic hydrogen production. Batch experiment was carried out to determine appropriate food waste to brown water mixing ratio. Maximum hydrogen yield of $6.92mmol\;H_2/g\;COD_{removed}$ was obtained at 70% food waste and 30% brown water. Semi-pilot scale reactor was operated based on result of batch experiment. Semi-pilot reactor operated, mixing 70% food waste and 30% brown water showed significant increment in butyric acid concentration. B/P (Butyric to propionic acid ratio) which is considered as governing factor for hydrogen production was found high (52.64). Maximum hydrogen yield of $25.03mmol\;H_2/g\;COD_{removed}$ was obtained. Result of this study concluded that mixing of food waste to brown water at appropriate ratio assists in enhanced hydrogen fermentation.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.11 no.3
• /
• pp.253-257
• /
• 2013

Geology, hydrogeology, and geochemistry are the main technical siting factors of a geological repository for spent nuclear fuels. This paper evaluated the siting criteria of overseas geological repository with related to hydrogeologic properties, such as hydraulic conductivity, partitioning coefficient, dispersion coefficient, boundary condition, and water age. Each country establishes the siting criteria based on its important geological backgrounds and information, and social environment. For example, Sweden and Finland that have decided a crystalline rock as a host rock of a geological repository show different siting criteria for hydraulic conductivity. In Sweden, it is preferable to avoid area where the hydraulic conductivity on a deposition hole scale (~30m) exceeds $10^{-8}m/s$, whereas Finland does not decide any criterion for the hydraulic conductivity because of limited data for it. In addition, partitioning coefficients should be less than 10-1 of average value in Swedish crystalline bedrock. However, the area where shows 100 times less than average partitioning coefficients of radionuclides in crystalline rock should be avoided in Sweden. In German, the partitioning coefficients for the majority of the long-term-relevant radionuclides should be greater than or equal to $0.001m^3/kg$. Therefore, it is strongly required to collect much and exact information for the hydrogeologic properties in order to set up the siting criteria.

• Korean Institute of Interior Design Journal
• /
• v.22 no.2
• /
• pp.176-185
• /
• 2013

(Background)In modern industrial society, the design industry failed to observe the law of nature, destructing it. Regardless its intention, the design industry destructed the environment so that it can't maintain the future life because of waste and disaster. For the purpose, it is important to adopt the technology to reuse the waste resource generated by building or minimize the damage to environment for the resource that can't be recycled. (Methods)On the assumption that the material and resource can be an alternative plan for the design that can make environment be sustained, the study analyzed materials and resources out of superior office space of USA, which were selected by LEED Green Building Rating System. (Results)The analysis result revealed that all cases reused main structural part of existing building and indoor and various materials were reused or recycled. Especially, the materials without or with low amount of VOCs and formaldehyde were used. In order to reduce construction waste, the finish of existing building was exposed as it was, 50% of reused materials were used or disassemblable materials were used. When regional materials are used, there is an advantage to reduce transportation cost and recycle the materials rapidly. Lastly, the environment-friendly certified by FSC was used in all cases. (Conclusion)After all, the material is one of the space design strategies sensitive to environment so it is important to select good material. Harmless, environment-friendly materials applied to sustainable office space contribute to the creation of healthy environment. In addition, the use of recycled materials and reused materials to minimize waste is also essential factor for creating sustainable space.

• Korean Journal of Soil Science and Fertilizer
• /
• v.31 no.3
• /
• pp.233-237
• /
• 1998

Mineralization of organic N is an important factor in determining the appropriate rate for organic waste application to cropland. The mineralization of organic N was examined using sandy soil amended with three kind of compost (municipal solid waste+biosolid, yard trimmings, yard trimmings+biosolid), respectively. During the 12-week incubation, the mineralization of organic N was determined by analyzing the inorganic N in leachates from unamended and amended soils. Soils amended with com posts made of biosolid had higher initial $NH_4-N$ concentration than unamended soil. Soil amended with compost made of yard trimmings only had slightly lower initial inorganic N concentration than unamended soil. In the soil amended with com post made of yard trimmings+biosolid, however, nitrification rate was enhanced in the first week of incubation. Net N mineralization and nitrification were positive in all treatments. Although the greatest net N mineralization occurred in the soil amended with compost made of yard trimmings+biosolid, the greatest net mineralization and nitrification rates occurred in unamended soil.

• Journal of Korean Society for Geospatial Information Science
• /
• v.15 no.2 s.40
• /
• pp.43-49
• /
• 2007

In this study, a GIS spatial analysis method adopted fuzzy concept was introduced and land suitability analysis of waste landfill were conducted through this method. Previous studies conducted site evaluation and land suitability analysis by appling spatial overlay of conventional GIS that based on the boolean logic of crisp set. However these method can not consider the uncertainty of spatial data and the incongruity of data classification criteria, because these method handle spatial data based on the boolean logic of crisp set. As not provided trustable analysis result, conventional GIS spatial overlay method lacks opportunity for expanding use in reality. This study selected waste landfill as facility for analysis and applied fuzzy spatial analysis method as an objective approach. In the concrete contents of study, a series process with regard to the definition procedure of membership function for continuous data and the fuzzy input value generation of spatial data for fuzzy analysis is established. As a result, in this study we proposed a method that derive parameters for deciding the membership function of spatial data by considering the criterion of data classification and factor selection for land suitability analysis of waste landfill.