• 제목/요약/키워드: Waste Vehicle

검색결과 97건 처리시간 0.024초

자동차용 GAS SPRING의 최적 설계에 관한 연구 (A Study on the Optimal Design of Gas Spring for Vehicle)

  • 김영범
    • 한국정밀공학회지
    • /
    • 제15권11호
    • /
    • pp.39-45
    • /
    • 1998
  • Gas springs have been widely used in motor vehicles as well as in most areas of industry. Instead of coil springs, these gas springs are easily opreated to open(extension process) or close (compression process) the doors because $N_2$ gas with high pressure and oil are charged in tube. Most of manufacturers are using the trial & error method in order to decide its specification(reaction force, damping force), which tends to waste time and money. Therefore, gas springs have been improved by properly changing the control pressure of $N_2$ Gas with its mounting location and weight to maximize its effect and to minimize its space. Although it has been researched on damping structure to minimize impact which is applied to vehicle when its back door is fully opened, the characteristics of damping structure are not known clearly. There(ore, this paper will not only clearly define the effect of important factors(open & close force)for gas springs through theoretical analysis but also provide optimum design specification through development of program to avoid traditional method of specification determination such as the trail It error method which is widely used in whole industries including automotive industry.

  • PDF

차세대 자동차용 희소금속 리싸이클링 기술동향 (Technical Trends of Rare Metal Recycling in the Next Generation Automobile)

  • 황용길;길상철;김종헌
    • 자원리싸이클링
    • /
    • 제23권2호
    • /
    • pp.3-16
    • /
    • 2014
  • 탄산가스 삭감과 자동차 연비를 향상시키기 위한 자동차의 경량화는 현시대적 큰 과제이다. 경량화를 위하여 Hybrid Electrical Vehicle(HEV), Electrical Vehicle(EV)의 고성능 모터용 Nd 자석, Li이온 2차전지 및 배기가스 정화용 PGM촉매의 성능개발이 활성화 되고 있다. 우리나라는 자동차 경량화와 기능 향상을 위하여 사용하는 희소금속을 자원이 편재되어 있는 중국 등에서 수입하기 때문에 수출국의 공급 조절, 가격 폭등 등으로 수급이 불안정한 경우가 있다. 이를 대비하여 차세대 자동차에서 배출되는 폐 희소자원을 리싸이클링 할 필요가 있다. 본고는 리싸이클링 기술과 현상에 대하여 조사 분석한 정보를 기술자나 연구자에게 전해주어 국가 자동차 산업 발전에 기여하는데 목적이 있다. 조사 결과, 폐 자동차에서 배출되는 고성능 모터, 배기가스 정화용 백금족금속(PGM) 폐촉매, Li이온 배터리 등의 리싸이클링기술은 전처리 기술과 후처리 기술로 분류하는데, 전처리 기술인 기계적 분리 선별 기술은 연구 개발 중이며, 후처리기술인 습, 건식 제련 기술은 확립되어 있다. 리싸이클링 경제성 측면에서 폐 부품의 기계적 선별 기술에 대하여 집중적으로 연구할 필요가 있다.

폐엔진 재제조를 위한 발전용 커먼레일 디젤엔진의 연료분사 타이밍 변경을 통한 성능향상에 대한 수치해석 연구 (Numerical Study on Performance Improvement by Changing of Fuel Injection Timing of Common Rail Diesel Engine for using Electric Generation for Waste Engine Remanufacturing)

  • 김승철;이석영
    • 에너지공학
    • /
    • 제27권2호
    • /
    • pp.49-54
    • /
    • 2018
  • 본 연구 대상인 발전기용 커먼레일 디젤엔진은 폐엔진을 재제조한 것으로서 폐엔진의 연료분사시기는 차량 운전조건에 적합하도록 설정되어 있다. 그러나 발전기용 엔진은 회전속도가 일정하고 주로 부분부하에서 운전된다. 따라서, 발전용 엔진에 적합한 연료분사시기의 변경이 필요하고 이러한 변경에 필요한 비용과 시간은 가능한 최소화시켜야 한다. 본 연구에서는 이에 적합한 연료분사시기 변경을 적용하였으며 실제 제작에 따른 시행착오를 줄이기 위해 선행적으로 엔진성능 수치해석을 도입하였다. 해석결과, 발전기용 엔진에 적합한 연료분사시기 변경에 따라 연소 효율성을 높아져서 성능 및 연비가 증가함을 확인하였다.

자동차(自動車)리싸이클링의 현황(現況)과 리싸이클링모델의 제시(提示) (Current Recycling Status of End-of-Life Vehicles(ELV) and Proposal of Recycling System Model)

  • 오재현;강정호
    • 자원리싸이클링
    • /
    • 제16권1호
    • /
    • pp.15-27
    • /
    • 2007
  • 1982년에 폐차제도가 도입되고, 1987년에는 자동차관리법이 제정되어, 우리나라 폐차업은 폐차(ELV)의 회수체계 및 등록말소 등에는 다른 나라에서 볼 수 없는 우수한 시스템을 갖추고 있다. 그리고 현재 폐차는 유상으로 시장경제원리에 의해서 처리되 있다. 그러나 폐차의 자원으로서의 인식과, 재활용율의 제고 그리고 환경성을 감안한 폐기물의 적정처리에 있어서는 규제와 노력이 미흡한 현황임을 부정할 수 없다. 한편, 정부에서는 지금 자동차리싸이클링에 관한 법률을 제정 중에 있다. 이 시점에 즈음하여 필자는 자동차리싸이클링에 관계되는 법 제도의 변천, 폐자동차의 리싸이클링 현황과 문제점을 정리하고자 하였다. 그리고 한국적 자동차리싸이클링 모델의 골격을 제시하여, 우리나라 자동차리싸이클링산업의 건전한 발전을 추구하였다.

실험계획법을 이용한 고효율 소형 열병합 시스템 성능 해석 (Performance Analysis of High Efficiency Co-generation System Using the Experimental Design Method)

  • 류미라;이준식;박정호;이성범;이대희
    • 한국자동차공학회논문집
    • /
    • 제20권3호
    • /
    • pp.20-25
    • /
    • 2012
  • As a kind of distributed energy system, the co-generation system based Diesel engine using after-treatment device was devised for its environmental friendly and economic qualities. It is utilized in that the electric power is produced by the generator connected to the Diesel engine, and waste heat is recovered from both the exhaust gases and the engine itself by the finned tube and shell & tube heat exchangers. An after-treatment device composed ceramic heater and DOC(Diesel Oxidation Catalyst) is installed at the engine outlet in order to completely reignite the unburned fuel from the Diesel engine. In this study, mutual relation of each experimental condition was derived through minimum number of experiment using Taguchi Design and ANOVA recently used in the various fields. It is found that the total efficiency (thermal efficiency plus electric power generation efficiency) of this system reaches maximum 94.4% which is approximately higher than that of the typical diesel engine exhaust heat recovery system.

전기자동차용 히트펌프의 열 부하 조건에 따른 캐빈온도 특성 (Characteristic of Cabin Temperature According to Thermal Load Condition of Heat Pump for Electric Vehicle)

  • 박지수;한재영;김성수;유상석
    • 대한기계학회논문집B
    • /
    • 제40권2호
    • /
    • pp.85-91
    • /
    • 2016
  • 내연기관 자동차와 달리 전기자동차는 배터리 폐열이 부족하여 실내 난방을 위해 추가적으로 PTC 히터를 사용하고 있지만 전력소모가 큰 단점이 있다. 최근 이러한 단점을 보완할 수 있는 히트펌프 적용에 관한 연구가 활발히 진행되고 있다. 본 연구에서는 히트펌프의 운전특성 해석을 위해 MATLAB/SIMULINK$^{(R)}$환경에서 R134a 히트펌프 모델과 캐빈 모델을 개발하였다. 모델은 여름과 겨울에서 히트펌프의 작동 특성에 따른 실내 온도변화를 나타낼 수 있으며, 모델 검증은 구성품 수준에서 응축기와 증발기의 용량 비교를 수행하였다. 또한 동일한 냉방조건에서 캐빈온도 변화 비교를 통해 캐빈 모델을 검증하였다. 해석 결과 전동압축기 소비전력은 모든 외기온도 조건에서 PTC 히터 보다 낮은 것으로 나타났다. 또한 영하조건에서 히트펌프의 난방용량이 부족한 현상에 대해 폐열회수를 적용하여 효율적인 난방 작동을 할 수 있는 조건을 분석하였다.

철도사업 환경영향평가와 환경관리(I) (Environmental Impact Assessment and Environmental Management of Railways (I))

  • 이현우;이영준;박영민;이정호;윤미경
    • 환경영향평가
    • /
    • 제13권6호
    • /
    • pp.295-305
    • /
    • 2004
  • After the Rio declaration on environment and development in 1992, developed countries are undertaking "environmentally sustainable transportation (EST)" projects. To meet the needs for EST, current transportation policies in Korea are rapidly reforming and one of its concerns is modernizing and upgrading railway freight system. Planning new railroad construction projects is increasing and subsequent environmental impact assessment (EIA) demands improvements, especially in both the EIA and decision making systems. In this paper, we discuss the present status of EIA for railroad construction projects, especially, by analyzing the EIA documents for the last six years. The EIA for railroad construction projects accounts for only 4.9% of total 918 project EIAs during 1998-2003, and the portion is gradually increasing. Major environmental concerns for EIA in railroad construction projects were geomorphological and ecological changes, protection of rare organisms, air pollution, water pollution, waste management, and noise, etc. We compared characteristics of environmental impacts of railroad construction with those of vehicle road construction, based on environmental and construction-planning indicators appeared in Environmental Impact Statements. Railroad construction usually requires longer tunnels and bridges for a given length than those for vehicle road construction. In addition, the amounts of geomorphological and ecological changes (road-cutting, embankment, devegetation, etc.) in railroad construction were generally less than 50% of those in vehicle road construction. To develop environmentally friendly railway systems, monitoring studies for environmental impacts of railroads such as habitat fragmentation and road kills, dispersal of alien plants, tunnelling effects on groundwater and vegetation, and noise impacts are highly recommended.

차량간 통신을 위한 셀 기반의 응급 메시지 브로드캐스트 기법 (Cell Based Emergency Message Broadcast Scheme for Inter-Vehicle Communication)

  • 주헌식;김종완
    • 한국컴퓨터정보학회논문지
    • /
    • 제15권7호
    • /
    • pp.41-47
    • /
    • 2010
  • 고속도로에서 발생하는 차량간의 응급상황은 사람과 차량의 안전을 위해 후방 차량들에게 신속하게 전달되어야 한다. 지금까지 차량간 메시지 전송은 802.11을 이용한 무선환경에서 브로드캐스트 방식으로 전달되어 왔다. 이는 메시지를 수신을 할 필요가 없는 차량에 까지 메시지를 전송하여 메시지 충돌과 무선 네트워크의 대역폭을 낭비한다. 메시지 충돌은 최후방 차량의 메시지 수신 시간이 오래 걸리는 요인이 된다. 본 논문은 기존의 문제를 극복하고자 차량을 셀(cell) 단위로 그룹화하고 셀 대표(CP: Cell Primary) 차량이 멤버 차량에게 메시지를 브로드캐스트하는 셀기반의 응급 메시지 브로드캐스트 기법(Message Broadcast based on Cell, MBC)을 제안한다. 실험에서는 제안 기법이 동일 환경의 브로드캐스트 보다 후방 차량의 메시지 수신율이 향상되어 응급메시지의 전송에 뛰어난 성능을 보인다.

폐배터리 블랙 매스(black mass) 회수를 위한 파쇄/분급 공정 분석 및 2종 혼합물의 수학적 분쇄 모델링 (Analysis of Crushing/Classification Process for Recovery of Black Mass from Li-ion Battery and Mathematical Modeling of Mixed Materials)

  • 김관호;이훈
    • 자원리싸이클링
    • /
    • 제31권6호
    • /
    • pp.81-91
    • /
    • 2022
  • 리튬이온 배터리의 사용은 전자기기 및 전기차 등의 생산량 증가로 인해 사용량이 크게 증가하고 있으며, 이와 맞물려 향후 폐배터리의 발생량 증가도 예상된다. 따라서 폐배터리를 구성하고 있는 여러 유가 자원 중 Ni, Co, Mn, Li 등이 함유되어 있는 양극 활물질이 매우 중요한 유가 자원으로, 이를 재활용하기 위한 많은 연구가 진행되고 있다. 양극 활물질 회수를 위해서 일반적으로 폐배터리로부터 블랙 매스(Black mass)를 회수하고, 이를 처리하여 주요 금속 자원을 회수한다. 블랙 매스를 회수하는 공정은 폐배터리를 수거-방전-해체-파쇄-분급의 순서로 이루어지며, 본 연구에서는 블랙 매스 회수를 위한 파쇄/분급 공정을 분석하였다. 파쇄/분급 공정을 통해 다양한 공정 산물의 입도 특성을 분석하고, 이 과정에서 생산된 산물의 입도별 형상을 현미경 및 SEM(Scanning Electron Microscopy)-EDS(Energy Dispersive Spectrometer)로 분석하였다. 분석 결과 블랙 매스로 회수되는 입자 중 74 ㎛의 미세한 입자들은 양극/음극 활물질이 전극으로부터 단체분리되어 존재하였지만, 100 ㎛ 이상의 입자들은 전극과 활물질이 붙어있는 상태에서 파쇄에 의해 입도가 감소되어 존재함을 확인하였다. 또한 배터리의 특징인 2종 혼합물(전극과 활물질)이 결합되어 있는 시료에 대해 파분쇄 특성을 모사할 수 있는 PBM(Population Balance Model) 을 개발하였으며, 2종 혼합물의 분쇄 상수를 도출하고 입도 분포 예측 성능을 검증하였다.

이동체의 수신 환경을 고려한 GNSS 신호 생성기 개발 (Development of a GNSS Signal Generator Considering Reception Environment of a Vehicle)

  • 조성룡;박찬식;황상욱;최윤섭;이주현;이상정;백정기;이동국;지규인
    • 한국통신학회논문지
    • /
    • 제37C권9호
    • /
    • pp.811-820
    • /
    • 2012
  • GNSS 신호는 구조가 개방되어 있을 뿐만 아니라 수신 신호 세기가 미약하여 전파교란에 취약하다. 이에 따라 전파교란에 대한 영향 분석 및 대응 기법에 대한 연구의 필요성이 증대되고 있다. 본 논문에서는 실제 전파교란 환경과 유사한 환경에서의 전파교란 영향 분석을 위하여 6가지 전술 환경에 대한 전파 전파 모델과 이동체의 수신환경을 고려한 동체 차단 모델을 설계 하였다. 전파전파 모델은 도심지역, 농촌지역, 수풀지역, 해안지역, 황무지, 눈/얼음 지역에 대해서 Two-ray 모델을 이용하여 설계 하였다. 동체 차단 모델은 안테나가 이동체에 의하여 받는 영향과 사용자가 직접 입력한 안테나 패턴을 이용하여 모델링하였다. 전파교란이 없는 정상 환경과 전파교란 환경에 대하여 이동체의 수신환경을 고려한 GNSS 신호 생성기의 출력은 상용수신기(NordNav)를 이용하여 검증 하였다. 정상 환경에서는 사용자의 항법 성능이 상용 H/W 신호 생성 시뮬레이터(STR4500)과 유사한 것을 확인하였다. 전파교란 환경에서는 이동체 위치에 따른 동체 차단 효과 및 전파교란 신호에 의한 GNSS 신호 획득 및 추적 손실이 정확히 반영됨을 확인 하였다.