• Journal of KSNVE
• /
• 제9권3호
• /
• pp.477-484
• /
• 1999

This study aims to present proper thickness of resilient mount and pattern of chips for the improvement of impact sound isolation. To achieve this aim, field tests were performed to evaluate the performance of impact sound isolation of pilot samples using waste tire chips against light and heavy-weight impacter, which samples were installed over concrete slabs of an apartment housing. In this study, the experiments were performed by the impact sound level of floors in KS F 2810 "Method for field measurement of floor impact level". As results, a flooring structure using waste tire chips as a resilient mount, with no relation to chip's types, has enhanced performance by 1~2 degree in light impact sound isolation, while it has improvement in heavy impact sound isolation. And fiber-type chips have better performance than granule-type ones when they overlaid concrete slab with 15~20 mm of thickness. For the improvement of impact sound isolation, it is recommended that insulating materials should be applied at joints between floating floors and walls, or floating floors and a doorframes, and also waterproof papers should be used for the effective thickness of resilient mount.ent mount.

• Macromolecular Research
• /
• 제16권5호
• /
• pp.404-410
• /
• 2008

In order to obtain 'value added products' from polypropylene (PP)/waste ground rubber tire powder (WGRT) composites, PP/WGRT microcellular foams were prepared via supercritical carbon dioxide. The effects of blend composition and processing condition on the cell size, cell density and relative density of PP/WGRT micro-cellular composites were studied. The results indicated that the microcellular structure was dependent on blend composition and processing condition. An increased content of waste ground rubber tire powder (WGRT) and maleic anhydride-grafted styrene-ethylene-butylene-styrene (SEBS-g-MA) reduced the cell size, and raised the cell density and relative density, whereas a higher saturation pressure increased the cell size, and reduced the cell density and relative density. With increasing saturation temperature, the cell size increased and the relative density decreased, whereas the cell density initially increased and then decreased.

• Smart Structures and Systems
• /
• 제24권4호
• /
• pp.553-566
• /
• 2019

This study aimed to categorize pervious rubberized concrete into fresh and hardened concrete analyzing its durability, permeability and strength. During the globalization of modern life, growing population and industry rate have signified a sustainable approach to all aspects of modern life. In recent years, pervious concrete (porous concrete) has significantly substituted for pavements due to its mechanical and environmental properties. On the other hand, scrap rubber tire has been also contributed with several disposal challenges. Considering the huge amount of annually tire wastes tossing out, the conditions become worse. Pervious concrete (PC) gap has graded surface assisted with storm water management, recharging groundwater sources and alleviate water run-offs. The results have shown that the use of waste tires as aggregate built into pervious concrete has tremendously reduced the scrap tire wastes enhancing environmental compliance.

• Journal of the Korea Concrete Institute
• /
• 제20권1호
• /
• pp.89-97
• /
• 2008

By replacing the meta-kaolin with cement and the waste tire chip with fine aggregate separately, the high strength concrete is protected from the spalling in fire and the method to constrain the temperature increase of steel bar within the concrete and the basic properties of the high strength concrete mixed with the material are reviewed. As the result, meta-kaolin increases the self fire proof characteristics of the concrete, the waste tire chip can share the internal expanding pressure so it can be deleted. In detail, using the meta-kaolin about the cement in 4$\sim$8% of weight ratio about the cement and the waste tire chip under the grade scope of 0.6$\sim$3 mm in 5$\sim$10% of weight ratio about the sand is very effective to prevent the spalling.

• Journal of Korean Society of Environmental Engineers
• /
• 제32권7호
• /
• pp.682-689
• /
• 2010

The purpose of this study was to determine any detrimental effects on surrounding environments by using bottom ash, waste tire, and mixture as a fill material to raise the ground level. Three different initial pHs (4, 6, 8) were applied to bottom ash and initial pH of 4 was used to waste tire and mixture. Among 7 heavy metals, Pb and Zn were exceeded drinking water standards but their concentrations decreased below drinking water standards within 1 PVE. Among 5 anions, sulfate exceeded 10 times of drinking water standards and further higher partition coefficients resulted in increased PVE of 8.21. For the mixture of bottom ash and waste tire, its concentrations of heavy metals and anions were decreased due to the dilution effect and lowered PVE from 8.21 (BA) to 5.89.

• Proceedings of the KSR Conference
• /
• 한국철도학회 2008년도 춘계학술대회 논문집
• /
• pp.1756-1767
• /
• 2008

Recently, a global trend has been established to facilitate the use of waste materials in geotechnical engineering applications. In Korea, where there is the need to save natural resources as these may become scare in the near future and to prevent excessive ground excavation for natural aggregates. The annual production of scrap tire and bottom ash has sharply increased in recent years. Therefore, it will be good waste resource recycling, if we can utilize the above wastes as fill materials in soft ground. In this study, based on the proven feasibility of bottom ash and tire shred-soil mixtures as lightweight fill materials, tire shred-bottom ash mixtures were suggested as a new lightweight fill material to replace the conventional construction material(soil) with bottom ash. Therefore, the main objective of this research is to investigate the feasibility of tire shred-bottom ash mixtures in order to estimate their suitability for the use of lightweight fill materials. So we carried out the performance tests of 2 large scale embankment which were made with tire shred-bottom ash mixture and the conventional fill material(weathered soil) respectively.

• Elastomers and Composites
• /
• 제38권2호
• /
• pp.128-138
• /
• 2003

It goes to be serious with environmental pollution because of great number of waste tires scrapped each you. That is why there are lots of studies for efficient recycle. We tried to reduce particle size of the waste tire powder using a new technology of self-designed grinding machine (SDGM) and ultrasonic treatment. The purpose of this study is to improve the physical properties of reduced waste tire powder. We investigated the fine powder by particle size distribution(PSD) analysis. And also we examined the physical and mechanical properties and cross-link density at various particle sire. Also we carried out morphological studies after making the products by SEM.

• Journal of the Korean Geotechnical Society
• /
• 제20권5호
• /
• pp.59-66
• /
• 2004

This study compared the reinforcing effect of sand by Geocell to those of newly devised Tirecell$^{\circledR}$ made by waste tires, tire mat by sidewalls of tires. Plate loading tests in a large chamber were conducted for different reinforcing materials at the same conditions of relative density, embedded depth of sand. The combination of Tirecell and sidewall gives the highest increase of bearing capacity and reduction of settlement. The Geocell with the same height of Tirecell gives similar reinforcement effect to the tire mat made by sidewalls.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2008년도 춘계학술대회 논문집
• /
• pp.471-474
• /
• 2008

The pyrolytic behavior of waste tire under microwave heating was investigated. Experiments were conducted using a lab- and bench-scale system to delineate the effects of microwave output power on the response. As the results of experiments, it was found that as the microwave output power was increased between 0.84 and 3.04 kW/kg, the oil yield and required time rapidly increased and decreased, respectively. With further increase of the microwave output power, the oil yield and required time did not change significantly.

• Proceedings of the Korean Geotechical Society Conference
• /
• 한국지반공학회 2004년도 춘계학술발표회
• /
• pp.364-371
• /
• 2004

This study presented the reinforcing effect of sands by newly devised $Tirecell^{(R)}$ made by waste tires, tire mat by sidewalls of tires and Geocell. Plate loading tests were conducted for different reinforcing materials at the same condition. The combination of Tirecell and sidewall gives the highest increase of bearing capacity and reduction of settlement. The Geocell with the same hight of Tirecell gives similar reinforcement effect to the tire mat made by sidewalls.