• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2005년도 춘계 학술기술논문발표대회 논문집
• /
• pp.69-72
• /
• 2005

Recently, there have been many studies seeking towards the utilization of cementitious powder from concrete waste as recycle cement. However, most of the studies actually have been researches about the reuse of mortar or paste, not concrete waste. In fact, either mortar or paste is quite different from a real concrete waste in terms of age and mixture. Thus the purpose of this study is to examine basic physical properties of recycle cement, manufactured with cementitious powder from concrete waste, and analyze differences in chemical and hydraulic properties of the cement and its tested model. As a result of the chemicai analysis, recycle cement is composed mainly of CaO and SiO2, and that it is even lower in the content of CaO than Portland cement, which is also supported by previous studies. But, Differently from previous studies, plastic working at the temperature of 650 was found an optimal condition under which cementitious powder from concrete waste could restore its hydraulic properties.

• 유기물자원화
• /
• 제23권2호
• /
• pp.21-27
• /
• 2015

본 논문은 자원순환사회 구축을 목표로 필요한 재원마련을 위해 도입예정인 폐기물부담금제에 대응하기 위한 폐기물의 에너지화 제고방안을 인천시를 중심으로 평가하고 폐기물부담금제 도입을 위해 고려하여야 할 사항들을 제안하였다. 인천시의 폐기물 에너지화를 위한 주요 문제점으로 파악된 음식물 류폐기물의 반입량 감소에 따른 폐기물의 고발열량화, 종량제봉투에 혼입되어 배출되는 금속류, 건전지 등을 해결하기 위한 대책을 도출하였다.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2001년도 The 6th International Symposium of East Asian Resources Recycling Technology
• /
• pp.751-754
• /
• 2001

A possibility of using waste plastics as a source of secondary fuel in blast furnace has been of recent interest. The success of this process, however, will be critically dependent upon the optimization of operating systems. for instance, the supply of waste plastics must be reliable as well as economically attractive compared with conventional secondary fuels such as heavy oil, natural gas and pulverized coal. In this work, we put special importance on the improvement of the combustibility of waste plastics as a way to enhance energy efficiency in blast furnace. As experimental variables to approach this target, the effects of plastic particle size, blast temperature, and the level of oxygen enrichment were investigated using a custom-made blast model designed to simulate a real furnace. Lastly, the combustion efficiency of the mixture of waste plastics and pulverized coal was tested. The observations made from these experiments led us to the conclusion that with the increase of both blast temperature and the level of oxygen enrichment, and with the decrease of particle size, the combustibility of waste PE could be improved at a given distance from tuyere. Also it was found that the efficiency of coal combustion decreased with the addition of plastics; however, the combustion efficiency of mixture could be comparable at longer distance from tuyere.

• International Journal of Computer Science & Network Security
• /
• 제21권8호
• /
• pp.65-70
• /
• 2021

Waste accumulation is becoming a significant challenge in most urban areas and if it continues unchecked, is poised to have severe repercussions on our environment and health. The massive industrialisation in our cities has been followed by a commensurate waste creation that has become a bottleneck for even waste management systems. While recycling is a viable solution for waste management, it can be daunting to classify waste material for recycling accurately. In this study, transfer learning models were proposed to automatically classify wastes based on six materials (cardboard, glass, metal, paper, plastic, and trash). The tested pre-trained models were ResNet50, VGG16, InceptionV3, and Xception. Data augmentation was done using a Generative Adversarial Network (GAN) with various image generation percentages. It was found that models based on Xception and VGG16 were more robust. In contrast, models based on ResNet50 and InceptionV3 were sensitive to the added machine-generated images as the accuracy degrades significantly compared to training with no artificial data.

• 한국대기환경학회:학술대회논문집
• /
• 한국대기환경학회 2000년도 추계학술대회 논문집
• /
• pp.341-342
• /
• 2000

산업사회를 발전시키는데 있어서 큰 기여를 하여온 플라스틱(Plastic)은 사용의 편리성과 다양한 형태로의 제품의 증가, 최근 자동차수의 급격한 증가, 그리고 석유화학공업의 발달로 폐플라스틱류의 발생빈도와 함유량이 급증하고 있다. 일반적으로 널리 사용되어 지고 있는 플라스틱의 종류는 7대 범용수지로 분류되는 LDPE, HDPE, PP, PS, PVC, ABS, PET가 전체 플라스틱 생산의 대부분을 차지하고 있다. (중략)

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2017년도 춘계 학술논문 발표대회
• /
• pp.222-223
• /
• 2017

In the automotive industry, such as scrap metal and plastic scrap process is being recycled. Although the glass beads are used as road paving or other additives and processing crushing, recycling is known that there are limits. The utilization of waste glass was evaluated as a concrete admixture by using powder characteristics and chemical composition of the glass. As a result of using waste-glass powder as an admixture, it is difficult to expect the pozzolanic effect, but it is found that it can increase the fluidity of concrete and ensure the durability performance in the appropriate amount range.

• Journal of Ecology and Environment
• /
• 제44권1호
• /
• pp.45-53
• /
• 2020

Background: The black soldier fly (Hermetia illucens) is gaining attention as an efficient decomposer of food waste. However, recalcitrant compounds such as plastics mixed into food waste may have negative effects on its growth and survival. Moreover, its efficiency of food waste degradation may also be affected by plastics. In addition, salt (NaCl) can also be present in high concentrations, which also reduces the efficiency of H. illucens-mediated food waste treatment. In this study, we assessed the growth of black soldier fly larvae (BSFL) reared on food waste containing polyethylene (PE) and polystyrene (PS) and NaCl. The weight of BSFL was measured every 2-4 days. Survival and substrate reduction rates and pupation ratio were determined at the end of the experiment. Results: The total larval weight of Hermetia illucens reared on food waste containing PS was greater than that of the control on days 20 and 24. However, the survival rate was lower in the group treated with 5% PS, as was substrate reduction in all PS-treated groups. The weight of BSFL reared on food waste containing PE was lower than that of the control on day 6. PE in food waste did not affect the survival rate, but the pupation ratio increased and substrate consumption decreased with increasing PE concentrations. Regardless of the plastic type, the addition of NaCl resulted in decreased larval weight and pupation ratio. Conclusions: Larval growth of black soldier fly was inhibited not by plastics but by substrate salinity. Additional safety assessments of larvae reared on food waste containing impurities are needed to enable wider application of BSFL in vermicomposting.

• 유기물자원화
• /
• 제10권1호
• /
• pp.109-119
• /
• 2002

본 연구에서는 음식물쓰레기의 자원화방안으로 메탄발효를 고려하여 메탄발효과정에서 음식물쓰레기와 생분해성 음식물쓰레기 전용봉투가 투입되었을 때 실제적으로 생분해성 플라스틱이 분해가 잘 이루어지며 생분해성 플라스틱이 미생물의 활성이나 분해반응에 영향이 있는지를 연구하였다. 30%생분해성 플라스틱의 경우, 미생물에 의한 무게감량에서 중온은 최대6%, 고온은 최대 10%밖에 분해가 되지 않았다. 신장율은 중옹이 약 150%, 고온이 약 120%까지 감소하였으며, 인장강도에서는 중온이 약 $180kgf/cm^2$, 고온이 $200kgf/cm^2$ 정도 감소하였다. 대체로 온도가 높고 미생물의 활성이 좋은 고온 혐기성 소화에서 중온보다 많은 무게감소를 보였으며 HDPE계열보다는 LLDPE계열의 플라스틱이 무게감량과는 상관없이 신장율과 인장강도에서 많은 감소를 보였다. 100%생분해성 플라스틱의 경우 미생물에 의한 무게감량에서 중온은 최대 8%, 고온은 최대 33%정도 감소가 있었다. 신장율은 중온이 약 230%, 고온이 약440%까지 감소하였으며, 인장강도에서는 중온이 약 $380kgf/cm^2$, 고온이 $400kgf/cm^2$ 정도 감소하였다. 이러한 결과 30%생분해성 플라스틱은 음식물쓰레기전용봉투로의 사용이 부적합하며 100% 생분해성 플라스틱의 경우 음식물쓰레기 전용봉투로 사용이 가능하나 제품이 고가이기 때문에 경제적 부담을 줄일 수 있는 방법이 요구된다.

• Archives of Plastic Surgery
• /
• 제39권3호
• /
• pp.238-243
• /
• 2012

Background : The publication rate of presentations at medical international meetings has ranged from 11% to 78% with an average of 45%. To date, there are no studies about the final rate of publications at scientific meetings associated with plastic surgery from Korea. The present authors investigated the publication rate among the presentations at meetings associated with plastic surgery. Methods : The titles and authors of the abstracts from oral and poster presentations were collected from the program books of the Congress of the Korean Society of Plastic and Reconstructive Surgeons (CKSPRS) for 2005 to 2007 (58th-63rd). All of the abstracts presented were searched for using PubMed, KoreaMed, KMbase, and Google Scholar. The titles, key words from the titles, and the authors' names were then entered in database programs. The parameters reviewed included the publication rate, type of presentation including running time, affiliation, subspecialty, time to publication, and publication journal. Results : A total of 1,176 abstracts presented at the CKSPRS from 2005 to 2007 were evaluated. 38.7% of the abstracts, of which oral presentations accounted for 41.0% and poster presentations 34.8%, were published as full papers. The mean time to publication was 15.04 months. Among journals of publication, the Journal of the Korean Society of Plastic and Reconstructive Surgeons was most used. Conclusions : Brilliant ideas and innovative approaches are being discussed at CKSPRS. The 38.7% publication rate found from this research appeared a bit lower than the average rate of medical meetings. If these valuable presentations are not available as full papers, the research would be a waste of time and effort.

• 유기물자원화
• /
• 제12권4호
• /
• pp.85-94
• /
• 2004

본 연구에서는 가연성 건설폐기물인 폐목재와 폐발포폴리스티렌의 유효이용을 목적으로 열압성형법에의한 폐목재-플라스틱 복합패널을 제조하였다. 전열프레스를 이용하여 다양한 성형조건하에서 복합패널 공시체를 제조하였으며, 그 겉보기 밀도, 흡수율, 흡수에 의한 두께 팽창률, 휨강도 등에 관한 일련의 실험을 행하였다. 폐목재-플라스틱 복합패널의 밀도는, 성형 온도 및 성형 시간에 관계없이, 성형 압력의 증가에 따라 높아지는 반면, 그 흡수율의 성형압력의 증가에 따라 작아진다. 복합패널의 흡수에 의한 두께 팽창률은, 성형 조건에 관계없이, 모두 1.2~2.0%의 범위에 있어, 높은 치수 안정성을 보인다. 복합패널의 휨강도는, 성형 온도 $120^{\circ}C$, 성형 시간 15min에서 일정하게 되는 경향이 있으며, 성형 온도 및 성형 시간에 관계없이, 성형 압력의 증가에 따라 현저하게 증가한다. 중합 반응과 성형을 동시에 하는 리액션프로세싱인 이 방법은, 그 제조 공정이 간단하고, 또한, 결합재로서 폐발포폴리스티렌 용액을, 골재로서 폐목재 칩을 이용하기 때문에, 공업 생산성이 있는 건설 발생 폐목재 및 폐발포폴리스티렌의 리사이클 방법으로서 지극히 유효하다고 생각된다.