• Food Engineering Progress
• /
• v.23 no.2
• /
• pp.112-117
• /
• 2019

The purpose of this study is to develop a method to cultivate lactic acid bacteria (LAB) as a by-product in the fermentation of kimchi through the use of Chinese cabbage leaves. A method to reduce the initial number of microorganisms using citric acid and ethanol to wash cabbage leaves was investigated. In this experiment, Chinese cabbage leaves were washed using a mixture of 3% citric acid and 7% ethanol and the washed cabbage leaves were juiced and used as a sample. The total microorganisms of kimchi cabbage juice (KCJ) was reduced from log 6.53 CFU/g to log 3.69 CFU/g by washing with citric acid and ethanol, and lactic acid bacteria from log 4.40 CFU/g to log 2.01 CFU/g. The salinity of KCJ was appropriate for the growth of lactic acid bacteria but the pH was too low. The yield of washing, juice extraction, and total were 80.82%, 79.32%, and 64.11%, respectively. KCJ made by washing with citric acid and ethanol was good for the culture broth of lactic acid bacteria.

• Proceedings of the KIPE Conference
• /
• 2007.11a
• /
• pp.142-144
• /
• 2007

This paper proposes problem improvement in existing method about three-phase current reconstruction method and present minimum voltage injection method and Smooth voltage injection method in single current sensor for washing machine motor drive. So, presented wash noise improvement method through ripple reduction in inverter. The simulation and experimental results are given to show the effectiveness of the proposed method for reconstructing the phase currents and reducing the noises.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.38 no.6
• /
• pp.942-952
• /
• 2014

Winter outerwear includes various clothes such as classical jackets/coats, padded jackets/coats, wind breakers, leather and fur jackets/coats. This research surveyed care-label instructions attached to 100 jackets/coats dropped off at five drycleaners in the Gyungin area. University students' perception and attitudes towards care labels and management of winter outerwear were examined using a questionnaire. Data collected from 230 respondents were analyzed by frequency analyses, t-tests, ANOVAs and Duncan tests with PASW 20.0. Half of the padding jackets/coats were labelled to be dry cleaned and dry cleaning was more excessively labelled than necessary. University students confirmed more care symbols than fiber compositions such as more at time of cleaning than at purchasing. Clothing-related major students understood care label symbols better than non-clothing major students. Consumers laundered some winter outerwear at home, even though they thought dry cleaning was a proper cleaning method. The appropriate cleaning method for padded jackets/coats is laundering; however, consumers who answered dry cleaning as an appropriate method were three times as those who answered washing, and those performed dry cleaning were two times as those who performed washing. Winter outerwear manufacturers should provide adequate and more specified care-information to consumers in order to maintain initial appearance and performance over longer periods.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2006.05a
• /
• pp.127-131
• /
• 2006

There are being a lot of studies for achievement of high speed Dehydration, high-strength and Lightweight of washing machine in the latest washing machine business. It is essential that Press-joining Strength of Spin Drum Seaming division is improved .to attain that target. Generally, we are using Mechanical press-joining by Seaming and T.I.G (Tungsten Inert Gas) welding among part joint method. Mechanical press-joining method that is mainly using for Stainless Steel (STS430) Drum have lots of merit that consumption of energy is low more than welding and production costs cut down and generation of the corrosion is solved by removing weld zone defect and materials having different properties are enable to join without special equipment. But, it is difficult to realize joint strength required at high speed operation because joint strength of mechanical press-joining method is low remarkably in comparison with welding. Also, there are a lot of analysis difficulties and very limited research is under way due to the dynamic factor such as multistage plastic working, elastic recovery, residual stress etc. The results of this study show optimal joining condition for mechanical press-joining by performing lots of tensile joining strength test with various specimen under multi-change of important design factor such as seaming width, bead area and bead depth etc.

• Journal of Powder Materials
• /
• v.24 no.1
• /
• pp.1-5
• /
• 2017

We have investigated the washing method of as-synthesized CdSe/ZnS core/shell structure quantum dots (QDs) and the effective surface passivation method of the washed QDs using PMMA. The quantum yield (QY%) of as-synthesized QDs decreases with time, from 79.3% to 21.1%, owing to surface reaction with residual organics. The decreased QY% is restored to the QY% of as-synthesized QDs by washing. However, the QY% of washed QDs also decreases with time, owing to the absence of surface passivation layer. On the other hand, the PMMA-treated QDs maintained a relatively higher QY% after washing than that of the washed QDs that were kept in toluene solution for 30 days. Formation of the PMMA coating layer on CdSe/ZnS QD surface is confirmed by HR-TEM and FT-IR. It is found that the PMMA surface coating, when combined with washing, is useful to be applied in the storage of QDs, owing to its long-term stability.

• Korean Journal of Materials Research
• /
• v.10 no.6
• /
• pp.445-449
• /
• 2000

Nickel ferrite $(Ni_{0.75}Fe_{2.25}O_4$ was synthesized by co-precipitation method in order to investigate its behavior under conditions of the reactor coolant system in pressurized light water nuclear power plants. Ammonia or potassium carbonate was used as a solution pH control agent, and aqueous ammonia or potassium carbonate solution or secondary distilled water was used as a co-precipitate washing agent. The effects of the pH control agent and the co-precipitate washing agent on the production yield on the basis of the Ni/Fe molar ratio and the particle characteristics of final products were investigated by XRD, SEM, EDX and XPS. The production yield was almost congruent with that of the initial aqueous mixture in case of using potassium carbonate as a pH control agent, while in case of using ammonia, it was quite changed. The difference seemed to be due to the effects of $Ni^{2+}{\leftarrow}NH_3$complexation in the aqueous solution and of the pH of co-precipitate washing agent.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.45 no.3
• /
• pp.224-231
• /
• 2012

We investigated the effects of various washing methods on the quality of semi-dried Pacific saury Cololabis saira, known in Korea as Guamegi. We immersed samples for 5 min in seawater, tap water, chlorinated water (100 mg/kg), ammonia water (100 mg/kg), citric acid (0.1 M), butylated hydroxyanisole (BHA, 0.2 g/kg), or sesame oil (5 g/100 g), and then dried them in the sun for 3 days. The moisture and crude lipid contents after drying were 26.62-32.49 g/100 g and 26.40-33.01 g/100 g, respectively. The moisture content significantly decreased while the crude lipid content increased during drying. The different washing methods did not have a significant effect on the acidity, peroxide values, or levels of thiobarbituric acid or biogenic amine in Guamegi. The lightness of Guamegi during drying significantly decreased, but this decrease was not significantly different among washing methods. The degree of acceptance in a sensory evaluation was higher for Guamegi treated with sesame oil. Our results suggest that these washing methods should not be used to inhibit lipid oxidation, biogenic amine formation, or color changes in semi-dried Pacific saury, because effective components are extracted by the lipids during drying.

• Proceedings of the KSR Conference
• /
• 2007.11a
• /
• pp.1236-1241
• /
• 2007

The feasibility of soil washing was investigated in the laboratory to treat heavy metals-contaminated railway soil. Various organic acids including ethylene diamine tetraacetic acid (EDTA) and citric acid as well as inorganic acids such as hydrochloric acid (HCl) and phosphoric acid were tested to evaluate washing efficiency. Generally, inorganic acid showed higher removal efficiency compared to organic acids. Specially, EDTA, which are well known as most effective washing agent to remove heavy metals from soil, was not efficient to remove heavy metals in this study. Among washing agents tested in this study, HCl was most effective. The removal of Cd, Cu, and Pb was high, however, that for Zn and Ni was less than 30% with 0.5 M HCl. This difference comes from analytical methods (Korean Standard Test Method for Soil). Aqua regia was used to extract Zn and Ni, however 0.1 N HCl was used for other metals. As a result, simple washing technology is not effective, to treat railway contaminated soil with heavy metals.

• The Journal of the Korea Contents Association
• /
• v.10 no.10
• /
• pp.68-77
• /
• 2010

In the case of operating steam generators for long periods in nuclear power plants, sludge is accumulated inside the steam generator. This phenomenon could adversely affect the operation of the steam generator. This paper is about the design of a sludge washing apparatus which can remove the sludge efficiently and the control methods of the apparatus. In this paper, to design the sludge washing apparatus, firstly, we design nozzles for spraying high-pressure water through applying mathematical models and lab tests. Secondly, we establish the mathematical theory for performance parameters required to drive the sludge washing apparatus. Thirdly, we design physical structures of the apparatus based on the established performance parameters. Finally, we present the control methods of the apparatus. The sludge washing apparatus presented in this paper moves along the walls of the steam generator according to cracks in the tube array, and spray the high pressure water to remove the sludge. By this way, a relatively large amount of sludge formed in the inner surfaces can be washed very effectively.

• Korean Journal of Clinical Laboratory Science
• /
• v.41 no.4
• /
• pp.189-195
• /
• 2009

Lung cancer is a type of cancer with high mortality; its 5-year survival rate is at a low 14%. Related cytological tests include sputum, bronchial brushing, bronchial washing and fine needle aspiration cytology test etc. From the test specimens in which sputum, bronchial brushing, bronchial washing, and fine needle aspiration cytology were performed, the sensitivity, specificity and accuracy between cytology test and histology test. In the sputum test, sensitivity was 27.71% and specificity was 98.02%, and the bronchial brushing test showed sensitivity of 93.33% and a specificity of 91.3%. The bronchial washing test was a sensitivity of 53.7% and its specificity was 98.9%, and the fine needle aspiration cytology test showed sensitivity and specificity were 88.46% and 72.97%, respectively. In the specimens diagnosed as normal at the sputum test, malignant diagnosis was found in 21 specimens of bronchial brushing, 30 cases of bronchial washings and 37 cases of fine needle aspiration cytology specimens. In the specimens diagnosed as normal at the bronchial washing test, malignant diagnosis was found in 5 specimens of sputum, 7 specimens of bronchial brushin and 1 cases of fine needle aspiration cytology. One specimens found to be normal in fine needle aspiration cytology turned out to maligant in sputum test. The result of this research shows that, in diagnosis lung cancer, a test method of high sensitivity and specificity should be pursued. However, depending on the location and malignancy of the illness, diagnosis may not be obtained in some cases. Therefore, we conclude that the cytological tests performed for lung cancer testing such as sputum, bronchial brushing, bronchial washing, and fine needle aspiration cytology should be carried out in a mutually complementary manner.