• 한국생활과학회지
• /
• 제22권5호
• /
• pp.461-476
• /
• 2013

This study aims to provide practical information of both color and hands of cotton fabrics dyed with persimmon dye powder for natural dyeing fashion industries by investigating dyeing behavior and color gamut, by testing mechanical properties depending on color characteristics, and finally by evaluating dyeing fastness. As results, the persimmon dye powder obtained by extracting the fruits to final solid powder was found as containing tannin and it partially coated between and on fibers similarly to traditionally dyed one. The K/S values of non-mordanted fabric and two differently mordanted ones with Fe and Cu seemed to reach their equilibrium from 800, 800, and 600% (owf), respectively. Yellow-red was the only one hue shown while tones were various as pale (p), light grayish (ltg), soft (sf), dull (d), grayish (g), and dark grayish (dkg). In mechanical properties, the dyed fabrics with p and ltg tended to be less altered than undyed ones whereas d and d kg by higher bath concentrations could be applied to boxy silhouette owing to their increased stiffness and less stretchability. Although fastness to dry cleaning and stain was good, color change by washing and rubbing needed to be improved.

• 대한가정학회지
• /
• 제41권2호
• /
• pp.107-121
• /
• 2003

This study was discussed the dyeing of wool and nylon fabrics with Chinese Scholar Tree extract. The extracts of Chinese Scholar Tree was prepared in the condition of heating at $95{\pm}5C$, for 1 hour and cooling to 40C. And then the extracts of color matter treate with vacuum concentration at $60{\pm}2^{\circ}C$, 30mmHg and dried with spray dryer. The dyeing of wool and nylon fabric in this experiment was also employed the mordant dyeing method such as pre-mordant, post-mordant and simultaneous mordant method. The mordanting agents used in this study were as followings ; aluminium potassium sulfate, copper(II) acetate monohydrate, chromium potassium sulfate$.$$7H_2O$, Tin(II) chloride dihydrate, iron(II)sulfate $7H_2O$. For an evaluation of the dyeing property of the mordanting agents, the pre-mordant method, the repeat dyeing and the fastness of the light, dry cleaning, washing and rubbing measured respectively. From the results of the dye absorption, the optimum dyeing condition of the wool and nylon fabrics with Chinese Scholar Tree extract is at 80C dyeing temperature for 60 minutes. The optimum concentration of mordanting agent is Al, Cr, Sn 1%, Fe, Cu 2% solution. In general, the fastness property of the dyed wool and nylon fabrics had a comparatively high grade.

• 한국의류산업학회지
• /
• 제20권2호
• /
• pp.210-218
• /
• 2018

The natural dye product market is expanding due to the recent interest in environmentally friendly products. This study examines dyeing using natural Coptidis Rhizoma. Chitosan and Tannin was treated to improve dyeability of Coptidis Rhizoma after finding the proper dyeing condition. In addition, dyeing characteristics were compared according to mordant types along with the mordanting methods for dye fixing and color change. The results indicated that the optimum dyeing condition was to treat the concentration of 5% (o.w.b.) at $80^{\circ}C$ for 90 minutes. By the chitosan and tannin treatments, K/S value of cotton fabrics by 3 times and those of wool fabrics by 2 times increased and color depthing of dyed fabrics was achieved after 2 cycles repetition. To improve dyeability, iron mordanting was most effective; in addition, the K/S Value of pre-mordanting fabrics versus post-mordanting fabrics increased the most. The color of the surface was changed to reddish yellow when Sn, Cu mordanting, and to greenish blue when Fe mordanting. The lightfastness of dyeing fabric with mordanting was weak at 1-2 grades, but the washing fastness was good for 4 grades and the rubbing fastness and sweat fastness were as good as those of the 3-4 grades. As a result, this study could help improve the dyeability of expensive Coptidis Rhizoma.

• 한국의류학회지
• /
• 제19권1호
• /
• pp.51-56
• /
• 1995

Cotton fabric was treated with acrylonitrile in t-butyl alcohol and then aminized by reduction of the resultant cyanoethyl cellulose with LiAIH4, under various temperatures and times. Aminized cotton fabric toras dyed with acid and reactive dye. Dyeability as to temperatures, pH, and color fastness were compared to the amiRe group content of treated cotton fabrics. The results of this study were as follow: 1. D.S of cyanoethyl cellulose has been increased by increasing treating temperatures and times. Maximum D.S of cyanoethyl cellulose was 1.45. By SEM and the tensile strength, the damage of the treated cotton was not observed. 2. Since aminized cotton has greater affinity on acid dye than untreated cotton, dyeability increased with the increase of amino group content, and the lower pH, $60^{\circ}C$. 3. Since amino group in aminized cotton changes surface charge of cotton, dyeability for reactive dye increased by increasing the amino group content. Optimum dyeability was obtained at pH 5-7, $40^{\circ}C$. And dyeability of the amine treated cotton increased with the NaCl conc. 4. Color fastness to washing & light of the amine treated cotton was very low except for the wash fastness of the reactive dye.

• 한국염색가공학회지
• /
• 제30권2호
• /
• pp.150-157
• /
• 2018

The purpose of this study is to investigate the proper dyeing condition, color fastness and functionality of silk fabrics dyed with Zizania latifolia Turcz. FT-IR spectrum analysis suggests that colorants of Zizania latifolia Turcz. are tannins. The dyeing of the silk fabrics using Zizania latifolia Turcz. was very good even without pretreatment or mordanting treatment. Optimal dyeing conditions of silk fabrics were colorant concentration of 200%(o.w.f.), dyeing temperature of $100^{\circ}C$, dyeing time of 60 minutes and dyebath pH of 5.5. Color fastness of dyed silk fabrics to washing, rubbing, perspiration and light was 4~4-5, 5, 4~4-5(acidic), 4-5(alkaline) and 2 respectively. UV protection rate and deodorization rate of silk fabrics dyed with Zizania latifolia Turcz. were improved. Reduction rate(Staphyloccus aureus) of silk fabrics was excellent at 98.3%. As a result, it was confirmed that the Zizania latifolia Turcz. could be used as an eco-friendly functional natural dye.

• 한국의상디자인학회지
• /
• 제16권1호
• /
• pp.117-123
• /
• 2014

This paper examined dyeing using sulfur dye with nylon and the characteristics of high gauge knitting for generating high functionality including light weight, wind resistance and elasticity using fine nylon threads. Yarn tension, stitch field and knitting speed of high and fine gauge knitting were measured. The influence of reducing agents on sulfur dye, optimum dyeing conditions and fastness features in nylon dyeing were analyzed. The analysis results are presented below. When nylon (Hyoseong, 40d/34f) and spandex (Hyoseong, 20d) for use as hosiery yarn were used to knit high gauge and flat weave, 44 gauge, the effective knitting conditions were a stitch field over 8.2cm in 1 course length, yarn tension of less than 5g and knitting speed below 18rpm. Nylon dyeing using sulfur dye showed effective results when a rongalite reducing agent was used at more than 10% o.w.f. and dyeing was maintained at $98^{\circ}C$ for 30 minutes. For dyeing nylon and spandex composite using sulfur dye, color fastness in washing, water, daylight and friction were higher than Class 4 or 5, which indicated a superior property. The analysis results verified that the existing problems in nylon dyeing could be solved by using sulfur dyes that don't use heavy metals due to superior fastness and therefore quality, high gauge nylon knit products could be produced.

• 한국의류산업학회지
• /
• 제10권4호
• /
• pp.544-551
• /
• 2008

In this study, the colorants of Amur cork tree were extracted with boiling water. Chitosan crosslinked cotton fabrics have been dyed with aqueous extract of Amur cork tree and their dyeabilities on the fabrics were studied. Additionally the fastness to washing and light were also investigated. Cotton fabrics were treated with a crosslinking agent epichlorohydrin in the presence of chitosan to provide the cotton fabrics the dyeing properties of natural dye(Amur cork tree) by the chemical linking of chitosan to the cellulose structure. This process was applied by means of the conventional mercerizing process. The chitosan finishing and durable press finishing of the cotton fabrics occurred simultaneously in the mercerization bath. On the surface color change, the fabric of no-chitosan finished and no-mordanted has greenish yellow. The more crosslinked chitosan on cotton fabrics has the more turned down greenish on the surface color, as increasing the concentration of chitosan, greenish color turn down to the yellow close the 90o hue angle. In all sorts of fabrics, dyeability(K/S) is slightly affected by the number of manufacturing process and the concentration of chitosan. But only mercerized cotton fabric has higher dyeability (K/S) than mordant treated cotton fabrics. Wash fastness has little different results by each condition, but almost similar values. Light fastness was improved with chitosan treatment on cotton fabric.

• 한국염색가공학회지
• /
• 제21권2호
• /
• pp.1-6
• /
• 2009

Recently, polyester is widely used in textile fabrics due to its application potentials in various fields. It is known that askin fabric is prepared with mainly polyester and is enjoyed with various end uses such as marine clothing, underwear, shirts, swimming suits and so on. For this purpose, color fastness should be considered with great importance during its wet processing step. In this context, vat dyes were very much attracted due to the advantage of superior fastness property. Thus, we have used indigo dye towards askin fabric dyeings and investigated corresponding properties namely, dyeing temperature, concentration of dye, reducing agent amount and alkali amount. The results showed that higher color strengths of indigo dyeing on askin fabric were obtained at $110^{\circ}C$, 8% o.w.f, 3g/l, 5g/l, respectively. The color fastness to washing was considerable generally.

• 한국염색가공학회지
• /
• 제22권1호
• /
• pp.14-20
• /
• 2010

Squid ink was purified to melanin powder by repeated treatments with aqueous sodium hydroxide and acetic acid solutions. The exhaustion dyeing conditions of melanin to wool fabrics were investigated in relation with pH, melanin concentration, dyeing temperature and time. The melanin was dyeable to cotton and wool fabrics but higher dyeability of the wool was observed. A K/S of 7 was obtained on the optimally dyed wool fabrics with 5 % owf melanin under pH 4 at $100^{\circ}C$ for 60 minutes. Color fastness to both washing and rubbing was excellent and color fastness to light was also very good probably due to the polymeric nature of the extracted sepia melanin.

• 한국염색가공학회지
• /
• 제10권1호
• /
• pp.1-10
• /
• 1998

The objectives of this study were to investigate the effects of mordants and dyeing method : on the dyeability and color fastness of the fabrics with the extract from Gardenia. The following results were drawn from the data obtained. 1. The wavelengths of the strongest absolution bands of Amur cork tree, Gardenia extract was 440nm respectively and the wavelengths 440-460nm after the mordants were added in the color extracts(The bands of Gardenia extract shifts to short wavelength side as pH increased.). In all cases, the abosorbancies were increased. 2. The main color substances in extract from Gardenia were expected to be cretin respectively by spectrophotometric and HPLC studies. 3. As to the concentration of color extract for dyeing, about 20g/L was the optimum concentration to dye silk and cotton fabrics with extract. 4. For silk and cotton fabrics dyeing with Gardenia extract, $SnCl_2$ was the best mordants. The K/S values of dyed fabrics were increased gradually as the concentration of mordants increased, and the highest K/S values were obtained at 5-10%. When using the mordanting methods, silk fabric by premordanting and cotton fabric by synmordanting had a greater effect K/S value. 5. The color fastness of fabrics dyed with Gardenia extract against dry cleaning, washing, rubbing and perpiration was improved 1 level or so but light fastness was remained 1 level showing without any effect.