• Proceedings of the KIEE Conference
• /
• 2004.07c
• /
• pp.1912-1914
• /
• 2004

As the characteristics of LED disposition, LED warning light must be designed differently from general incandescent lamp warning light whose light source is located in origin. In this paper, the globe's lens of LED warning light was designed considering the LED intensity distribution and the arrangement of the LED. And prove the appropriateness of that design by simulation in LightTools which is optical design program.

• Proceedings of the KIEE Conference
• /
• 2004.11a
• /
• pp.261-263
• /
• 2004

This paper studies the lighting pattern control of a high-brightness LED warning light. The driving circuit for the warning light is composed of a full-wave rectified circuit and of a control circuit using a micro-controller (AT89c2051). The micro-controller is programmed in a suitable manner to accomodate a number of variable lighting patterns and to adjust the blinking speed. To reduce the total number of LEDs installed a special consideration is made to the bundled pattern in a lamp module which is lit simultaneously. The resultant LED warning light has merits not only over the conventional incandescent warning light on the energy saving aspect but also over some other LED-type ones in the market.

• Korean Journal of Optics and Photonics
• /
• v.32 no.1
• /
• pp.15-21
• /
• 2021

In this paper, an aircraft warning light's optical system was designed using an LED light-source module and a collimating Fresnel lens. As for the optical system, a collimator Fresnel lens was designed for each module to satisfy a vertical-elevation center luminous intensity of 20,000 cd and the divergence-angle luminous-intensity standard conditions of the Ministry of Land for Infrastructure and Transport for aircraft warning lights. In addition, the optical system was optimized by adjusting the position and tilt of the LED light-source module and Fresnel lens. By analyzing and comparing the light-distribution characteristics of the optical system, an aircraft-warning-light optical system with optimal performance was obtained.

• New Physics: Sae Mulli
• /
• v.68 no.11
• /
• pp.1268-1274
• /
• 2018

Aircraft-warning lights are lights that are used to inform pilots in flight about the presence of buildings or dangerous objects. Currently, the light sources of most aircraft-warning lights have been replaced by light-emitting diodes (LEDs). However, the aircraft-warning lights that are installed do not meet the optical performance standards and may cause airplane collisions. Therefore, the use of such light poses a risk to aviation safety. In order to solve this problem, we designed a Fresnel lens with the same luminous intensity distribution ovef $360^{\circ}$ direction; thus, we collimated the light beam from the LED light source with a narrow beam divergence angle in the form of an array of aspheric pieces. After that, we designed and simulated an aircraft-warning-light optical system with a center luminous intensity of 20,000 cd and a vertical divergence angle of $3^{\circ}$ or more by optimizing the lens' tilt and the distance between the LED and the Fresnel lens.

• Journal of Internet of Things and Convergence
• /
• v.4 no.1
• /
• pp.37-41
• /
• 2018

This paper examines smart warning triangles to prevent secondary accidents on roads. After a traffic accident on the road, a safety tripod must be installed to notify the accident. However, it can cause secondary accidents during warning triangle installation. To solve this problem, a smart warning triangle was proposed and implemented. A smart warning triangle acts as a triangle through a logo light projector when it detects an impact. Arduino functions as an impact detector and a logo light projector. The proposed smart safety tripod is expected to help prevent secondary accidents by acting as a safety tripod if the brightness of illumination is complemented.

• Journal of Advanced Marine Engineering and Technology
• /
• v.31 no.8
• /
• pp.990-997
• /
• 2007

In the last 5 years, collisions of fishing vessels have recorded about 54.6% of the total marine accidents. Specially about 64.0% of these collisions were caused by navigator's negligence of watch keeping during works. The purpose of this paper is to develop vessel detecting system that is able to receive the whistle blast of other vessel and make a warning sound and light when the fishermen can not confirm the approaching another vessel on account of fishing works. It is designed to receive the whistle signal blast by a weather tight microphone. The signal is processed by analog active filter in order to enhance the SNR(Signal to noise ratio). And this microprocessor-based system is programmed to do ADC(Analog to digital converting), FFT analysis, controls of warning sound and light.

• Journal of Aerospace System Engineering
• /
• v.17 no.1
• /
• pp.68-78
• /
• 2023

In this paper, improvement measures were studied for false alarm (abnormal lighting) of emergency hydraulic warning light due to RF radiation signals in aircraft. When the warning lamp of the emergency hydraulic system is lit during flight due to electromagnetic interference caused by RF radiation signals, it affects flight mission and safety which can result in efficiency degradation and maintenance of flight mission. For false alarm of emergency hydraulic warning light, root cause analysis and troubleshooting were carried out. By shielding a composite strip under fuselage of the aircraft located in the path of the RF radiation signal, the RF radiation signal flowing into the emergency hydraulic indicator was blocked. Results of applying the improvement method through ground and flight monitoring were also described.

• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.16 no.3
• /
• pp.1-6
• /
• 2008

The stalling speed flight test of light airplane, ChangGong-91, was performed to acquire the certification. With power-off engine condition, the wings level stall flight tests were conducted at the aircraft configuration of various flap angle - clean, 20degree, and full flap, respectively. They were performed considering with the combination of the maximum and minimum test weight, and forward and afterward center of gravity. The stalling speeds and the minimum speeds of light airplane were determined from the results of flight test. Also, the appropriateness of stall warning speeds are evaluated through the flight test measures. The airplane is recoverable only with pitch control and engine throttle from stall state without exceptional operation.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.45 no.6
• /
• pp.473-480
• /
• 2017

Military helicopters are equipped with OBIGGS System to prevent an explosion caused by the projectile. OBIGGS warning lights up should only operate when sensing fault, but it frequently worked without malfunction in the initial production process and the design improvements were required. In this paper, the cause of OBIGGS abnormal warning lights up was reviewed, the improvements were established and proven.

• Human Ecology Research
• /
• v.55 no.6
• /
• pp.661-673
• /
• 2017

This study analyzes the current wearing status and awareness of warning clothing for elementary school students as well as to identify points of improvement for traffic accident prevention and clothing safety education. A survey was conducted on 279 elementary $5^{th}$ and $6^{th}$ graders in the Incheon area and Ansan in 2017 June & July. The results showed that more than 2/3 of participants had no experience wearing warning clothing. Second, 63% of participants answered 'traffic accident prevention' as the main purpose of warning clothing, showing that about 2/3 are aware of the importance. Third, yellow was the most preferred color of fluorescent material for warning clothing with a significant difference of preference by grade. The favorite color combination of participants was yellow & orange followed by yellow & light green, but showed a significant difference between boys and girls. Fourth, the most preferred form of warning clothing was fluorescent short sleeves and shorts without reflective tape, suggesting that students paid more to the purpose for reflective tape. Fifth, while 68% of participants were negative towards wearing safety clothes that are currently available, 66% were willing to try safety clothes if the color and the design improved. The results suggest an improved education with more emphasis on the purpose of clothing safety. Color and design adjustment of the current warning clothing is also recommended for a more active participation by elementary school students.