• 제목/요약/키워드: Warm Cover

검색결과 34건 처리시간 0.037초

우리나라 도서지역의 토지피복과 변화패턴 분석 (Analysis of Land Cover Composition and Change Patterns in Islands, South Korea)

  • 김재범;이보라;이호상;조낭현;박찬우;이광수
    • 한국농림기상학회지
    • /
    • 제24권3호
    • /
    • pp.190-200
    • /
    • 2022
  • 본 연구는 도서에 대한 휴양과 안보 등 도서산림기능 발굴 및 지속적인 유지보전을 위하여 남한지역도서의 2000년과 2020년의 Globeland30 토지피복자료 분석을 통해 도서지역 토지피복의 구성 및 변화형태를 추적하고 도서산림의 이해를 위한 공간정보를 제공하고자 했다. 각 년도 별 토지피복분포와 격자 기반의 토지피복변화 분석을 수행했고 그 결과, 2000년 대비 2020년에는 농경지와 초지가 각각 7.6%, 1.7% 감소한 반면 산림과 인공지가 각각 5.7%, 3.2% 증가했고 도서산림은 20년 동안 전체 도서면적의 42.2% 인 157,246 ha가 유지되었다. 또한 농경지와 인공지가 존재하지 않는 도서 중 1 ha 이상 초지가 산림으로 변하는 262 개 도서와 산림이 초지로 변하는 421 개 도서를 관측하여 천이와 교란에 대한 잠재적 정보를 갖는 683 개 도서를 확인했다. 인공지의 유입이 확인된 22개 도서에서는 주로 농경지가 인공지로 전환되었다. 해당 도서 면적의 42.2%를 차지하는 산림이 초지로 변하고 27.8%의 농경지와 초지가 산림으로 변했다. 거주환경개선 및 사회기반시설 확충 등 인공지의 유입은 개발지역에 국한되지 않고 정주환경 개선을 위한 산림 파괴와 조경, 농경지의 개발 및 휴경화 등 주변부까지 토지피복의 변화를 수반하는 경우가 확인되었다. 해당 연구 결과는 추후 도서생태연구와 도서산림의 관리방안을 마련하기 위한 기초자료로 높은 활용도를 보일 것으로 판단된다.

천연 소재를 이용한 보온덮개 개발 및 사업화 방안 (Development and Commercialization of Warm Covers Using Natural Fabric)

  • 최주현;백현국;조윤진
    • 융합정보논문지
    • /
    • 제8권1호
    • /
    • pp.227-233
    • /
    • 2018
  • 본 연구는 보온성이 우수한 시설하우스용 보온덮개를 개발하고, 나아가 해당 제품의 사업화 방안을 제안하는 것을 목표로 하였다. 공기층을 형성시켜 보온 효과를 증대시키기 위해 우모를 충전재로 사용하였는데, 이때 우모는 의류나 기타 섬유 제품에는 잘 사용되지 않고 폐기 처분되는 깃털(Feather)을 사용하였다. 개발된 보온덮개는 시설하우스의 외측을 덮어 농작물을 보온하는 제품으로, 우모가 충전되는 충전재, 패딩, 내피, 단열재, 외피를 포함하는 다층 구조로 이루어졌으며, 실험을 통해 보온율을 검증하였다. 다양한 적용을 위해 시설하우스의 내측 또는 내부 소형 하우스에 사용될 수 있는 보온 덮개도 개발하였다. 나아가 기술과 마케팅의 융합 개발 체제를 통해 제품화에 성공하였으며, 마케팅 전략을 도출하여 사업화 방안을 제안하였다. 본 기술은 보다 다양한 시설하우스 자재나 기타 산업용 제품에 응용 가능할 것으로 본다.

지역기후모델에서 고해상도 지면피복이 1989년 동아시아 여름몬순 순환에 미치는 영향 (Impacts of the High Resolution Land Cover Data on the 1989 East-Asian Summer Monsoon Circulation in a Regional Climate Model)

  • 서명석;이동규
    • 대기
    • /
    • 제15권2호
    • /
    • pp.75-90
    • /
    • 2005
  • 이 연구에서는 지면-대기 모수화 방안 (BATS1e)이 접합된 미국 국립기상연구센터 (NCAR)에서 개발한 지역기후모델(RegCM2)을 이용하여 지면피복의 변화가 동아시아 여름몬순에 미치는 영향에 대해서 조사하였다. 지면피복 변화의 영향을 분석하기 위하여 두 종류의 지면피복 자료를 이용하였다. 하나는 NCAR에서 제공하는 지면피복 자료 (CTL 실험)이고 다른 하나는 최근의 기상위성자료로부터 직접 분류한 고해상도 지면피복분류 자료(LCV 실험)이다. CTL 실험에서는 중국 중부지역과 몽고지역의 지면온도가 각각 약 $1-3^{\circ}C$ 높고 낮게 모의되었다. 또한 모의 영역 북부지역에서는 강수가 과다하게 모의된 반면 모의영역 남부 바다지역의 강수는 과소하게 모의되었다. 지면피복 변화에 의한 알베도, 거칠기 길이 및 최소기공저항계수와 같은 지면의 생물리적 요소들의 변화는 지면-대기 상호작용을 변경시켰다. 즉, 지면피복이 낙엽활엽수림에서 농지와 관계농지로 변경된 LCV 실험의 중국 중부지역에서는 잠열 속과 풍속이 현저하게 증가되었다. 그 결과 CTL 실험에서 나타났던 중국 중부지역에서의 온난편차가 LCV 실험에서는 대부분 완화되었다. 중국 중부지역에서의 강한 기온 하강은 태평양과 대륙사이의 기압 차를 약화시키고 있다. 남동에서 북서방향으로의 기압경도력이 약화됨에 따라 중국 남부와 남중국해로부터 북동쪽으로의 수증기 수송도 약화되었다. 이러한 수증기 수송의 변화는 모의 영역 북부지역에서의 과다한 강수 모의와 남중국해에서의 과소한 강수모의를 동시에 크게 완화시켰다. 그러나 지면피복의 변화는 특히 7월과 8월에 한반도와 일본 열도 지역에서의 강수를 크게 증기시키고 있다.

Classification ofWarm Temperate Vegetations and GIS-based Forest Management System

  • Cho, Sung-Min
    • International journal of advanced smart convergence
    • /
    • 제10권1호
    • /
    • pp.216-224
    • /
    • 2021
  • Aim of this research was to classify forest types at Wando in Jeonnam Province and develop warm temperate forest management system with application of Remote Sensing and GIS. Another emphasis was given to the analysis of satellite images to compare forest type changes over 10 year periods from 2009 to 2019. We have accomplished this study by using ArcGIS Pro and ENVI. For this research, Landsat satellite images were obtained by means of terrestrial, airborne and satellite imagery. Based on the field survey data, all land uses and forest types were divided into 5 forest classes; Evergreen broad-leaved forest, Evergreen Coniferous forest, Deciduous broad-leaved forest, Mixed fores, and others. Supervised classification was carried out with a random forest classifier based on manually collected training polygons in ROI. Accuracy assessment of the different forest types and land-cover classifications was calculated based on the reference polygons. Comparison of forest changes over 10 year periods resulted in different vegetation biomass volumes, producing the loss of deciduous forests in 2019 probably due to the expansion of residential areas and rapid deforestation.

제주도 난대상록수림에서 착생식물의 다양성 연구 (Diversity of Epiphyte in the Warm Temperate Evergreen Forest. Jejudo)

  • 송국만;강영제;현화자;변광옥
    • 한국환경과학회지
    • /
    • 제22권1호
    • /
    • pp.99-107
    • /
    • 2013
  • This study surveyed the distribution and characteristics of epiphytes and host trees in Jejudo's warm-temperate evergreen forests area. The gathered data will be used for evaluating ecological changes according to climate change. The study found 46 species of epiphytes in Jejudo; 12 of which were species of pteridophytes and 5 species of orchids, totaling 17 species of epiphytes. The appearance frequency was the greatest with Lepisorus thunbergianus, followed by Lemmaphyllum microphyllum and Lepisorus onoei. The area with the greatest diversity of epiphytes was nutmeg tree forests which have the largest number of 2.89 average species. Lemmaphyllum microphyllum had the greatest percent cover of the epiphytes whose importance was found to be the greatest. The factors involved were the epiphytes' diversity index (0.64), maximum species diversity (1.23), evenness (0.52), and dominance (0.48). The study has noted the distribution characteristics of epiphytes according to altitudes above sea level. The Lemmaphyllum microphyllum can survive at an altitude of 600 m above sea level, Lepisorus thunbergianus at 200 - 1,400m above sea level, Lepisorus onoei. at 400 - 1,000 m, and Gonocormus minutus at an altitude above 800 m. The host trees, consisting of Quercus serrata, Castanopsis cuspidata var. sieboldii, and Carpinus laxiflora, stands at 2-19 m high and 2.5 - 120 cm wide, showing diverse kinds of trees and sizes. Jejudo's warm-temperate evergreen forests have lower epiphyte diversity compared with those of subtropical and tropical areas in Japan and China. Based on the characteristics of the host trees order, epiphytes' distribution associated with the altitude above sea level was typical.

연성파괴이론에 의한 마그네슘 합금 EL-cover 부품 온간 성형 공정 설계 (Design for Warm Forming of a Mg El-cover Part Using a Ductile Fracture Criterion)

  • 김상우;이영선
    • 소성∙가공
    • /
    • 제23권4호
    • /
    • pp.238-243
    • /
    • 2014
  • Recently, magnesium alloys have been widely used in the automotive, aerospace and electronics industries with the advantages of high specific strength, excellent machinability, high electrical conductivity, and high thermal conductivity. Deep drawn magnesium alloys not only meet the demands environmentally and the need for lighter products, but also can lead to remarkably improved productivity and more rapid qualification of the product The current study reports on a failure prediction procedure using finite element modeling (FEM) and a ductile fracture criterion and applies this procedure to the design of a deep drawing process. Critical damage values were determined from a series of uniaxial tensile tests and FEM simulations. They were then expressed as a function of strain rate and temperature. Based on the plastic deformation histories obtained from the FEM analyses of the warm drawing process and the critical damage value curves, the initiation time and location of fracture were predicted. The proposed method was applied to the process design for fabrication of a Mg automotive compressor case and verified with experimental results. The final results indicate that a Mg case part 39% lighter than an Al die casting part can be produced without any defects.

Warm Dust and Gas of Massive YSOs Revealed by Herschel PACS Spectroscopy

  • 권우진
    • 천문학회보
    • /
    • 제40권2호
    • /
    • pp.41.3-41.3
    • /
    • 2015
  • As part of the Herschel key program "Water in Star-forming Regions with Herschel (WISH)", PACS imaging spectroscopy data have been taken toward ten massive young stellar objects (YSOs): four high mass protostellar objects (HMPOs), two hot molecular cores (HMCs), and four ultracompact HII regions (UCHIIs). The spectra cover a broad range of wavelengths (55 to 210 micron) presenting various atomic and molecular lines as well as excellent dust thermal continua. By fitting the continua utilizing a modified black-body formula we estimate mass-weighted temperature and column density distributions of warm dust and find that UCHII regions are warmer and HMCs are more deeply embedded than the other types. We also estimate rotational temperature and column density distributions of warm CO gas using the rotational diagram analysis. In addition, based on the comparison of high J CO line fluxes to the RATRAN estimates of central heating envelope models, we find that majority of warm CO is originated from bipolar outflow shocks.

  • PDF

Late Fall Nitrogen Application and Turf Cover for Zoysiagrass (Zoysia japonica) Spring Green-up

  • Oh, Jun-Suk;Lee, Yu-Jin;Lee, Sang-Kook
    • Weed & Turfgrass Science
    • /
    • 제4권4호
    • /
    • pp.383-389
    • /
    • 2015
  • The use of zoysiagrass (Zoysia japonica Steud.) in the transition zone is limited because of a lack of cold hardiness although zoysiagrass has many advantages compared to other warm-season and cool-season grasses. Late-fall N fertilization is often applied for darker green color of turfgrass in early spring and more extensive root growth without rapid top growth. The objective of the study was to evaluate the effects of late fall N application and turf cover for zoysiagrass spring green-up. Clear polyvinyl chloride (PVC) film was used for turf cover. The amount of N applied were 5 and $10g\;N\;m^{-2}$ for the low and high N rate treatments, respectively. Covered zoysiagrass had greater turfgrass color and quality in early spring than non-covered zoysiagrass. The high N rate had 0.6 to 2.3 greater turfgrass quality than the low N rate on 7 of 9 rating dates. Slow-release N as late fall fertilization is more effective for turfgrass color and quality than fast-release N in spring. Turf cover could reduce the period of yellow zoysiagrass, and the earlier time of spring green-up could be advanced by increasing turfgrass quality and growth of zoysiagrass.

한라산 구상나무림의 사면별 식생구조와 치수발생 특성 (Vegetation Structure at the Slope Direction and Characteristic of Seedlings of Abies koreana in Hallasan Mountain)

  • 송국만;강영제;현화자
    • 한국환경과학회지
    • /
    • 제23권1호
    • /
    • pp.39-46
    • /
    • 2014
  • This study surveyed Abies koreana to identify the correlation between its vegetation structure according to its slope direction and seedling establishment in a bid to build basic research data on the changes and conservation of the A. koreana in Hallasan Mountain. The findings of its vegetation structure revealed that in both areas, Importance value was given to the A. koreana for its tree layer, the Taxus cuspidata for its shrub layer, and the Sasa quelpaertensis for its herb layer. However, in the Youngsil area with the tree layer, high importance was given to deciduous broad-leaved trees such as Prunus maximowiczii, Quercus mongolica, and the young species of the A. koreana in the shrub layer that can maintain the A. koreana forest's greater importance in the Jindallebat than in the Youngsil. Thus, the A. koreana forest in the Jindallebat is believed to lastlonger. The findings of correlation between the quantity of seedlings and their location by area revealed that in each tiny quadrat, the A. koreana seedling averaged 5.3 in the Youngsil and 2.9 in the Jindallebat. Both areas were all found to have a positive correlation in terms of rock exposure ratio and dead tree ratio as well as a negative correlation with regard to the cover degree of S. quelpaertensis, the canopy gap, the total vegetation, and the herb layer. It was found that the cover degree of the herb layer in the Youngsil and the S. quelpaertensis in the Jindallebat had the largest impact on the A. koreana seedlings.

수치임상도 표준 메타데이터 설계 및 구현 (Design and Implementation of Standard Metadata for Digital Forest Cover Type Map)

  • 김경민;김철민;김태균
    • 한국지리정보학회지
    • /
    • 제11권4호
    • /
    • pp.51-63
    • /
    • 2008
  • 1996년 수치임상도가 구축된 이래로 방대한 분량의 수치임상도가 유통되고 있으나 제작 시기, 현지조사 시기, 항공사진 촬영 시기, 품질 정보 등의 메타데이터가 함께 제공되지 않아 효율적인 정보 활용에 어려움이 있었다. 수치임상도에 대한 이해를 높이고 향후 온라인 환경에서 효율적인 검색과 유통을 지원하기 위해 국가표준을 준수하는 메타데이터가 필요하다. 본 연구에서는 NGIS 표준인 지리정보 관리용 메타데이터 표준(TTAS.IS-19115)을 기반으로 총 10개의 패키지 및 50개 항목으로 구성된 수치임상도 표준 메타데이터를 설계하였다. 수치임상도 메타데이터를 표준구조에 맞춰 손쉽게 구현할 수 있도록 메타데이터 저작도구를 개발하였으며 수치임상도 사용자 편의성을 고려한 메타데이터 뷰어를 함께 개발하여 수치임상도 배포 시 제공할 수 있게 하였다. 본 연구는 산림GIS 분야 최초로 NGIS 표준을 준수하는 메타데이터를 설계한 것으로 수치임상도의 효율적인 활용을 도모하고 향후 타 산림 주제도의 메타데이터 작성 시 유용한 정보가 될 수 있으리라 기대된다.

  • PDF