• 한국안전학회지
• /
• 제32권2호
• /
• pp.147-152
• /
• 2017

The external reactor vessel cooling (ERVC) is well known strategy to mitigate a severe accident at which nuclear fuel inside the reactor vessel is molten. In order to compare the heat removal capacity of ERVC between the nuclear reactor designs quantitatively, numerical method is often used. However, the study for ERVC using computational fluid dynamics (CFD) is still quite scarce. As a validation study on the numerical prediction for ERVC using CFD, the subcooled boiling flow and natural circulation of coolant at the ULPU-V experiment was simulated. The commercially available CFD software ANSYS-CFX was used. Shear stress transport (SST) model and RPI model were used for turbulence closure and wall-boiling, respectively. The averaged flow velocities in the downcomer and the baffle entry under the reactor vessel lower plenum are in good agreement with the available experimental data and recent computational results. Steam generated from the heated wall condenses rapidly and coolant flows maintains single-phase flow until coolant boils again by flashing process due to the decrease of saturation temperature induced by higher elevation. Hence, the flow rate of coolant natural circulation does not vary significantly with the change of heat flux applied at the reactor vessel, which is also consistent with the previous literatures.

• 한국실내디자인학회논문집
• /
• 제16권3호
• /
• pp.119-129
• /
• 2007

This study illustrates a prototype proposal and its evaluation for the development of floor plans in the condominium housing remodeling. For this I evaluated the survey of the residents of the 'K' town in Joonge-dong, Nowon-gu, Seoul, against the proposal which was developed based on the resident's pre-survey. The result includes that the residents' preference for community actions such as the removal of fences which are reviewed as negative, whereas the introduction of a fitness center and community facilities in the library are reviewed as positive. The residents preferred the open space by the piloti structure, although which is the wall column structure, where they anticipated a rest area, sports facilities, and bicycle drop-off spots. The sidewall proposal in the main building and the full use of the roof floor were underestimated in terms of design concept. The research also illustrated the residents' desired space planning options, those tending to use of space 'B type', personalization 'C type' and spatial size 'A type'. Residents responded positively to the introduction of the 'Alpha' space in which two households share one space that could be used for multiple purposes such as a rest area, an environment-friendly garden, and hobby room, etc, and also there is another possibility it plays an important role to the sociality in community.

• Archives of Pharmacal Research
• /
• 제14권4호
• /
• pp.298-304
• /
• 1991

Isoprinosine, an antiviral agent with a bitter taste, has been clinically used up to a maximum of 4 g daily in 4-8 doses. In this investigation, isoprinosine was microencapsulated with ethylcellulose 22 cps, 50 cps and 100 cps by means of polymer deposition from cyclohexane through temperature change. Complete removal of cyclohexane from the microcapsules was necessary, since ethylcellulose-coated microcapsules obtained from cyclohexane medium were heavily solvated with cyclohexane and formed lumps even after drying. The displacement of cyclohexane by n-hexane during isolation of microcapsules (Method III) or the freezing of the anal-washed microcapsules before drying (Mothod II) provided the dried products which were more discrete microcapsules than those which were simply dried in the air overnight (Method I). Method III was especially the most effective procedure in preparing finer and more discrete microcapsules. The drug-release from microcapsules was influenced by the ratio of core to wall, the viscosity grade of ethylcellulose and the overall microcapsule size. The release rate was adequately fitted to both the first-order and the diffusion-controlled processes. It is therefore possible to design the release-controlled microcapsules with ethylcellulose of different viscosity along with various core to wall ratio.

• Design & Manufacturing
• /
• 제10권2호
• /
• pp.50-54
• /
• 2016

In the semiconductor industry the final products were checked for several environments before sell the products. The burning test of memory and chip was implemented in reliability for all of parts. The memory and chip were developed to high density memory and high performance chip, so circuit design was also high integrated and the test bed was needed to be thin and fine pitch socket. LGA(Land Grid Array) IC socket with thin wall thickness was designed to satisfy this requirement. The LGA IC socket plastic part was manufacture by injection molding process, it was needed accuracy, stiffness and suit resin with high flowability. In this study, injection molding process analysis was executed for 2 and 4 cavities moldings with runner, gate and sprue. The warpage analysis was also implemented for further gate removal process. Through the analyses the total deformations of the moldings were predicted within maximum 0.05mm deformation. Finally in consideration of these results, 2 and 4 cavities molds were designed and made and tested in injection molding process.

• 대한환경공학회지
• /
• 제27권7호
• /
• pp.726-731
• /
• 2005

장방형 횡류식 침전지는 정수 공정에서 일반적으로 활용되고 있는 침전지 형태로 정수공정 전체에서 탁질 제거 비중이 가장 큰 매우 중요한 공정이다. 횡류식침전지는 유입탁도, 수온 등의 변화에 의해 단락류와 밀도류가 발생하게 되는데 이런 문제점을 해결하기 위해 지내 정류벽을 설치하는 방안이 제안되기도 했지만 정류공에서 발생되는 제트류 등의 문제로 인해 실제 적용사례는 없는 실정이다. 본 연구는 침전지의 전단면에 수류가 일정하게 흐르도록 유도할 수 있는 이동식정류장치에 관한 연구이다. 이동식 정류장치는 부드러운 천 재질의 정류벽이 침전지 전단면에 거쳐 수류의 흐름과 동일한 속도로 이동하면서 침전지내에서 발생될 수 있는 밀도류와 단락류를 조절하여 침전지내 수류 흐름을 전단면에서 일정하게 유도하는 장치이다. 이동식 정류장치를 가동한 결과 침전지 체류시간이 1시간 연장되는 효과를 나타냈다. 즉 다시 말해 염소 이온 최고농도 유출시간이 100분에서 160분으로 연장되었다. 탁도 제거율 시험은 원수 탁도와 체류시간 변화에 따라 연속식과 회분식으로 각각 시험하였다. 탁도 개선율은 연속 운전 방식에서 36%, 회분식 운전 방식에서 58%를 각각 나타냈다. 따라서 장방형 횡류식 침전지에 본 연구에서 제안한 이동식 정류장치를 도입할 경우 30% 이상 탁도 개선이 가능할 것으로 판단된다.

• 대한족부족관절학회지
• /
• 제8권1호
• /
• pp.46-51
• /
• 2004

Purpose: Problematic late sequelae are common following a calcaneal fracture regardless of the initial treatment. We retrospectively evaluated the painful conditions and reviewed the results of the operative treatment in patients with previously treated calcaneal fractures. Materials and Methods: Between October 1996 and September 2001, forty-three patients who underwent subsequent surgical treatment for late sequelae of calcaneal fracture were reviewed. The initial treatment consisted of only immobilization in a cast in 7 patients, closed reduction with pin fixation (Essex-Lopresti technique) in 22 and open reduction and internal fixation in 14. Painful conditions in the hind foot included subtalar arthritis in 31 patients, calcaneofibular impingement in 13, peroneal tendinitis in 6, displaced posterior bony fragment in 3, sural neuritis in 2, subtalar and midtarsal arthritis in 1 and displaced plantar bony fragment in 1. The surgical procedures for the late complications were performed at a mean of 19 months (range, 6 to 35 months) after the injury and consisted of lateral wall ostectomy and in situ subtalar fusion in 28 patients, only lateral wall ostectomy in 5 patients, lateral wall ostectomy and subtalar distraction arthrodesis in 3, removal of displaced posterior bony fragment in 3, sural nerve transposition in the peroneus brevis in 2, triple arthrodesis in 1 and removal of displaced plantar bony fragment in 1. Mean postoperative follow up period was 57 months (range, 33 to 82 months). The results of treatment were evaluated on the basis of pain, improvement in the ability to perform activities of daily living, to return to work or to a pre-injury level of activity. Results: Pain was partially relieved in 38 patients (88%), but not relieved in 5. Function improved in 34 patients (79%), and 32 (74%) returned to work or to a pre-injury level of activity. There was a trend that the longer the interval between the injury and the operation, the longer the subsequent interval until the patient returned to full activities or work. Conclusion: Meticulous physical examination and intensive prompt treatment for remaining pain after initial treatment of calcaneal fractures are recommended for patient's satisfaction and returning to work.

• 구강회복응용과학지
• /
• 제33권2호
• /
• pp.97-105
• /
• 2017

목적: Passive irrigation (PI)과 Passive ultrasonic irrigation (PUI)의 상아질 잔사 제거 효율성을 비교하는 것이다. 연구 재료 및 방법: 16 mm 길이로 표준화된 하악 소구치 치근을 근관 확대 후 종단으로 이등분 하였다. 분리된 한쪽 상아질벽에는 길이 4 mm, 너비 0.2 mm, 깊이 0.5 mm의 표준화된 구를 형성하였고, 반대쪽에는 직경 0.3 mm, 깊이 0.5 mm인 3개의 반구 형태의 함요를 형성하였다. 각 구와 함요에는 NaOCl과 혼합된 상아질 잔사로 채우고, 퍼티 인상재를 사용하여 재조합하였다. Group 1은 PI를 이용하고 Group 2는 PUI를 이용하여 각 근관내를 세정하였다. 현미경과 디지털카메라로 절편의 근관벽을 촬영하고, 구와 함요에 잔존하는 상아질 잔사의 양을 scoring system을 이용하여 평가하였다. 결과: 근관의 중앙 1/3에서 group 1이 group 2에 비해 잔사를 더 많이 제거하였지만, 치근단부에서는 유의한 차이가 없었다. 결론: 하악 소구치에서 근관에 기구가 닿지 못하는 부위를 세정시, 근관의 중앙 1/3에서 PUI를 사용하는 것이 PI에 비해 상아질 잔사의 제거 효율이 우수했지만, 치근단부에서는 PUI와 PI의 유의한 차이가 없었다.

• 미생물학회지
• /
• 제50권1호
• /
• pp.73-83
• /
• 2014

단백질이 풍부한 식품을 고온 하에서 조리하는 과정 중에 주로 발생되는 돌연변이원 heterocyclic amines (HCAs)에 대한 유산균의 결합력 및 제거능을 조사하였다. 당 발효능 및 16S rRNA 염기서열 분석을 통해 동정된 19종의 유산균 중 Lactobacillus acidophilus D11, Enterococcus faecium D12, Pediococcus acidilactici D19, L. acidophilus D38, Lactobacillus sakei D44, Enterococcus faecalis D66 및 Lactobacillus plantarum D70의 세포이나 배양 상등액은 3-amino-1,4-dimethyl-5H-pyrido[4,3-b]indole (Trp-P-1)과 3-amino-1-methyl-5Hpyrido[4,3-b] indole (Trp-P-2)에 의한 Salmonella typhimurium TA98 및 TA100의 돌연변이 유발을 억제할 수 있었다. HCAs에 대한 유산균 세포의 결합력은 cell wall, exopolysaccharide 및 peptidoglycan 보다 높게 나타났다. 한편, 이들의 결합력은 단백질 분해효소, 가열, sodium metaperiodate 및 산 처리에 의해 유의하게 감소되었으므로 세포벽에 존재하는 당이나 단백질 성분이 이들 HCAs을 결합시키는데 중요한 역할을 하는 것으로 확인되었다. 또한 E. faecium D12, L. acidophilus D38 및 E. faecalis D66의 결합력은 SDS나 금속이온에 의해 감소되었으므로 이들세포와 돌연변이원 사이에는 이온 결합이나 소수성 결합이 작용하는 것으로 추정되었다. 한편, HCAs 결합력이 높은 L. acidophilus D38과 L. plantarum D70은 장관 상피세포에 대한 부착력이 낮으므로 돌연변이원을 세포에 결합시켜 체외로 배출함으로써 독성물질을 제거하는데 효과적인 것으로 확인되었다.

• Korean Chemical Engineering Research
• /
• 제51권1호
• /
• pp.80-86
• /
• 2013

본 연구에서는 광촉매담지 실리카담체 카트리지를 장착한 광촉매반응기시스템을 활용하여 악취 가스인 황화수소 및 휘발성유기화합물(VOC)인 에탄올 및 톨루엔이 함유된 폐가스처리를 수행하고, 그 연구결과를 상용 광촉매담지 부직포필터 카트리지를 장착한 광촉매반응기시스템을 활용한 연구결과와 비교 및 평가하였다. 광촉매담지 실리카담체 카트리지를 장착한 광촉매반응기시스템의 경우는 1단계 운전에서 에탄올 및 톨루엔의 제거율은 각각 80% 및 20% 값을 계속 유지하였으나, 에탄올의 제거율은 톨루엔과 다르게 점점 떨어져서 1단계 끝에는 제거율 40% 값을 보였다. 한편 황화수소의 제거율은 100%에서 90%로 감소하였다. 에탄올의 제거율은 2단계 운전에서 10% 값을 보여서 더욱 감소하였으나, 황화수소 및 톨루엔 제거효율은 처리대상 폐가스의 톨루엔 부하가 4배로 급격히 증가하였음에도 불구하고 제거효율이 각각 90% 및 20% 값을 그대로 유지하였다. 3단계 운전은 알루미늄 코팅된 반사막필름을 광촉매반응기에 사용한 결과로서, 에탄올 및 톨루엔의 제거율은 각각 약 5%가 증가한 15% 및 25%의 제거율을 보였다. 한편 광촉매담지 부직포필터 카트리지를 장착한 광촉매반응기시스템의 에탄올, 황화수소 및 톨루엔 제거율은 1단계 운전에서 각각 10%, 97% 및 100% 값을 유지하였다. 그러나 2단계 운전에서 에탄올, 황화수소 및 톨루엔 제거율은 각각 5%, 95% 및 2~3% 미만의 제거율을 보여서 에탄올과 황화수소는 제거율이 약간 저하되었으나 톨루엔의 경우에는 완전 제거에서 급락하였다. 또한 에탄올, 황화수소 및 톨루엔 모든 경우에서 반사막필름의 효과를 전혀 보지 못하였다. 따라서 상용 광촉매담지 부직포필터 카트리지를 장착한 광촉매반응기시스템에서 에탄올, 황화수소 및 톨루엔 제거는 부직포필터의 혐수성 VOC에 대한 흡착능에 주로 기인하였고, 광촉매 활성에 의한 제거는 광촉매담지 실리카담체 카트리지를 장착한 광촉매반응기시스템보다 훨씬 미미하였다.

• 한국임상수의학회지
• /
• 제30권1호
• /
• pp.80-85
• /
• 2013

Twenty one cows in Goyang and Paju cities were referred due to displacement of the abomasum and foreign body in the rumen. Omentopexy and rumenotomy through a right flank celiotomy were performed for treatment of abomasal displacement and the foreign body removal in the rumen. The right paralumbar fossa is clipped and prepared surgically. Local anesthesia is instituted by performing inverted L block. The abdomen was entered through 25 to 30 cm vertical incision in the right paralumbar fossa starting 4 to 5 cm ventral to the transverse processes of the lumbar vertebrae. A 14-gauge needle with rubber tubing attached is inserted to relieve the gaseous pressure and to facilitate further exploration and manipulation. The rumen was gently pulled out of the abdominal cavity and incision was made at the omentum. Rumenotomy was done and retrieved the foreign body. After the rumen was rinsed with sterile saline, the rumen wall was closed by a Lembert suture technique. The omentum was closed by a simple continuous suture. Right flank omentopexy was performed for the surgical correction of abomasal displacement. Recovery results among 21 cows included 9 excellent, 5 good, 2 fair and 5 bad. It was considered that operation of abomasal displacement and foreign body removal in the rumen through right flank celiotomy was a good surgical technique to reduce expenses, surgical pain, and surgery time.