Browse > Article

A study on the injection molding technology for thin wall plastic part  

Heo, Young-Moo (Dies and Molds Technology Group, Korea Institute of Industrial Technology)
Shin, Kwang-Ho (Dies and Molds Technology Group, Korea Institute of Industrial Technology)
Publication Information
Design & Manufacturing / v.10, no.2, 2016 , pp. 50-54 More about this Journal
Abstract
In the semiconductor industry the final products were checked for several environments before sell the products. The burning test of memory and chip was implemented in reliability for all of parts. The memory and chip were developed to high density memory and high performance chip, so circuit design was also high integrated and the test bed was needed to be thin and fine pitch socket. LGA(Land Grid Array) IC socket with thin wall thickness was designed to satisfy this requirement. The LGA IC socket plastic part was manufacture by injection molding process, it was needed accuracy, stiffness and suit resin with high flowability. In this study, injection molding process analysis was executed for 2 and 4 cavities moldings with runner, gate and sprue. The warpage analysis was also implemented for further gate removal process. Through the analyses the total deformations of the moldings were predicted within maximum 0.05mm deformation. Finally in consideration of these results, 2 and 4 cavities molds were designed and made and tested in injection molding process.
Keywords
CAE analysis; Cold cutting; Cutting behavior; Punch; Roughness; Side gate;
Citations & Related Records
Times Cited By KSCI : 2  (Citation Analysis)
연도 인용수 순위
1 P. Sung and R. Chen,"Connector structure based modeling of assembly sequence planning", Applied Mechanics and Materials Volume 496-500, pp. 2729-2732.
2 D.Y. Kim, H.S Park, W.K. Kim, C.R. Pyo and H.Y. Kim, "Shape design of FPCB connector to improve assembly performance", J. of KSME 36, pp. 347-353, 2012.   DOI
3 C.H.Yoon, J.G. Park, H.S. Choi and Y.S. Kim "Quality improvement for crimping process of electrical connector using FEM analysis", Trans. of Material Processing 18 pp. 229-235, 2009.   DOI
4 Y. Heo, J. Kim, H. Lee, S. Won, and S. Yoon "Design of Wire to Board Insulation Displacement Connector for Simplification of Assembling Process Proceeding of the 6th Int. Conf. on Mfg.", Machine Design and Tribology p. 303, 2015.
5 유진, 신희석, 한무근, 허영무, "노트북 PC용 WTB 커넥터 설계", 제 11회 금형가공심포지엄 논문집, pp. 156-162, 2014.
6 허영무, 박형필, 신광호, " 커넥터 소켓 하우징 사출성형해석", 한국자동차공학회 논문집 p. 1745, 2013.
7 H.H. Shin, Y.M. Heo,"Study on the Effect of Injection Molding Time for Molding of Small Pitch Connector Housing", POLYCHAR21, p. 274, 2013.