이동식 정류장치를 이용한 횡류식 침전지 침전효율 개선 연구

Improvement of Rectangle Sedimentation basin using the Moving Baffle

  • 조영만 (부산광역시 상수도사업본부 수질연구소)
  • Cho, Young-Man (Water Quality Research Institute of Waterworks Headquarters, Busan Metropolitan City)
  • 발행 : 2005.07.31

초록

장방형 횡류식 침전지는 정수 공정에서 일반적으로 활용되고 있는 침전지 형태로 정수공정 전체에서 탁질 제거 비중이 가장 큰 매우 중요한 공정이다. 횡류식침전지는 유입탁도, 수온 등의 변화에 의해 단락류와 밀도류가 발생하게 되는데 이런 문제점을 해결하기 위해 지내 정류벽을 설치하는 방안이 제안되기도 했지만 정류공에서 발생되는 제트류 등의 문제로 인해 실제 적용사례는 없는 실정이다. 본 연구는 침전지의 전단면에 수류가 일정하게 흐르도록 유도할 수 있는 이동식정류장치에 관한 연구이다. 이동식 정류장치는 부드러운 천 재질의 정류벽이 침전지 전단면에 거쳐 수류의 흐름과 동일한 속도로 이동하면서 침전지내에서 발생될 수 있는 밀도류와 단락류를 조절하여 침전지내 수류 흐름을 전단면에서 일정하게 유도하는 장치이다. 이동식 정류장치를 가동한 결과 침전지 체류시간이 1시간 연장되는 효과를 나타냈다. 즉 다시 말해 염소 이온 최고농도 유출시간이 100분에서 160분으로 연장되었다. 탁도 제거율 시험은 원수 탁도와 체류시간 변화에 따라 연속식과 회분식으로 각각 시험하였다. 탁도 개선율은 연속 운전 방식에서 36%, 회분식 운전 방식에서 58%를 각각 나타냈다. 따라서 장방형 횡류식 침전지에 본 연구에서 제안한 이동식 정류장치를 도입할 경우 30% 이상 탁도 개선이 가능할 것으로 판단된다.

Sedimentation is treated as the most important unit process in waterworks, and plays great role on turbidity removal efficiency. Rectangle sedimentation basin is the most widely accepted sedimentation process. But it has some problems with short-circuit flow and density flow caused by temperature and influent turbidity variation. To solve these problems, installation of rectification wall was suggested, but not generally fully accepted in field. Because hole of rectification wall cause jet flow. In this research, use of moving baffle was investigated. Moving baffle was designed to induce uniform velocity at every section of water flow. The baffle walls was made from soft fiber materials. The baffle walls with flow of sedimentation basin moves at same speed. It is like that it controls density flow and short-circuit flow and induce uniform velocity at every section of water flow in sedimentation basin. When moving baffle was operated retention time of sedimentation basin was extended to 1 hours. When it talked again and the effluent time of highest concentration of the chlorine ion from 100 minutes was extended to 160 minutes. Turbidity removal efficiency was tested with different operation modes(continuous and batch) with influent turbidity and retention time. It was revealed that turbidity removal efficiency carl be improved up to 36%(continuous mode) and 58%(batch mode) respectively. Consequently if moving baffle introduces in Rectangle sedimentation basin, it forecasts that the turbidity improvement above 30% will be possible.

키워드

참고문헌

  1. 수처리기술 v.10 no.3 침전지내 구조물 설치에 따른 흐름변화 및 침강성 영향 최계운
  2. Water Treatment Plant Design Sanks, R.L.
  3. 공업용수 v.162 횡류식내경사판식침전지의 이론적설계 宇野昌
  4. Int. J. Geomech. v.111 no.2285 Sedimentation and the Design of Settling Tank Camp, T.R.
  5. Int. J. Geomech. v.2837 Fundamental concepts of rectagular settling lanks Ingersoll, A.C.;Mckee, J,E.;Brooks, N.H.
  6. J. AWWA v.73 no.7 Hydraulic scale model simulation of the sedimentation process Kavamura, S.
  7. J. AWWA v.164 no.6 Density considerations in sedimentation Hudson, H.E. Jr.
  8. J. Environ. Eng. v.121 Experimental Studies of Heavy Radial Density Currents Moursi, A.M.;Mccorquodale, J.A.;Ibrahim, S.;El-Sebakhy
  9. J. AWWA v.72 no.9 The use of a perforated baffle at the inlet of rectangular settling basins Bernardo, L.D.;Giorgetti, M.F.