• 제어로봇시스템학회:학술대회논문집
• /
• 2004.08a
• /
• pp.1530-1534
• /
• 2004

This paper presents a novel bio-mimetic quadruped walking robot with a waist joint, which connects the front and the rear parts of the body. The new robot, called ELIRO-1(Eating LIzard RObot version 1), can bend its body while the legs is transferred, thereby increasing the stride and speed of the robot. The waist-jointed walking robot can move easily from side to side, which is an important feature to guarantee a larger gait stability margin than that of a conventional single rigid-body walking robot. We design the mechanical structure of the robot, which is small and light to have high movability and high degree of human friendship. In this paper, we describe characteristics of the waist joint and leg mechanism as well as the analysis using ADAMS to select appropriate actuators. In addition, a hardware and software of the controller of ELIRO-1 are described.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2002.11a
• /
• pp.347.2-347
• /
• 2002

This paper presented a design and a Vibration control of a biped walking RGO(Robotic Gait Orthosis) and walking simulation by this system. The vibration evaluation of the Knee Joint Mechanism on the biped walking RGO(Robotic Galt Orthosis) was used to access by the 3-axis accelerometer with a low frequency vibration for the spinal cord injuries. It will be expect that the spinal cord injury patients are able to recover effectively by a biped walking RGO. (omitted)

• Journal of Institute of Control, Robotics and Systems
• /
• v.8 no.6
• /
• pp.484-491
• /
• 2002

We developed a new type of human-sized BWR (biped walking robot) driven by a new actuator based on the ball screw which has high strength and high gear ratio. Each leg of the robot is composed of three pitch joints and one roll joint. In all, a 10 degree-of-freedom robot with two balancing joints was developed. A new type of actuator for the robot is proposed, which is composed of four bar link mechanism driven by the ball screw. The robot overcomes the limit of the driving torque of conventional BWRs. The BWR was designed to walk autonomously by adapting small DC motors for the robot actuators and has a space to board DC battery and controllers. In the performance test, the BWR performed sitting-up and down motion, and walking motion. Through the test, we found the possibility of a high performance biped-walking.

• Journal of the Korean Institute of Telematics and Electronics B
• /
• v.33B no.9
• /
• pp.1-12
• /
• 1996

In this paper, we propose an adaptive gait by which a quadruped walking robot can walk against external disturbances. This adaptive gait mechanism makes it possible for a quadruped walking robot to change its gait and accommodate external disturbances form various external environmental factors. Under the assumption that external disturbances can be converted to an external force acting on the body of a quadruped walking robot, we propose a new criterion for the stability margin of a waling robot by using an effective mass center based on the zero moment point under unknown external force. And for a solution of an adaptive gait against external disturbances, an method of altitude control and reflexive direction control is suggested. An algorithmic search method for an optimal stride of the quadruped mehtod, the gait stability margin of a quadruped walking robot is optimized in changing its direction at any instance for and after the reflexive direction control. To verify the efficiency of the proposed approach, some simulaton results are provided.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.18 no.12
• /
• pp.111-116
• /
• 2019

With the recent acceleration of industrial technologies and active research, wearable robot technologies have been applied to various fields. To study the utility of wearable robots, basic research on kinetic mechanisms of the human body, bio-signal analysis, and system control are essential. In this study, we investigated the basic structure of a wearable system and the operating principles of a driving mechanism. The control system and supporting structure, which comprise the driving mechanism, were designed and manufactured. Motion and load analyses were performed simultaneously for the design of the kinematic drive, and the driving mechanism was constructed by analyzing walking motion. The operating conditions of the cylinder were verified by stride via driving experiments. Further, the accuracy and responsiveness of the system were confirmed by comparison with actual motion, and the system safety was validated by applying loads.

• Journal of Biosystems Engineering
• /
• v.27 no.6
• /
• pp.513-520
• /
• 2002

A 5-row walking garlic harvester with pulling mechanism was developed in the study, based upon a kinematical analysis and related preliminary field tests on the conventional garlic harvesting method. The harvesting efficiency of the developed harvester was more than 98% in the garlic field irrigated before harvesting, 80-85% in the field without irrigation. The harvesting performance of the harvester was 660∼825㎡/hr at the forward speed of harvester of 0.3m/s in the irrigated field before garlic harvesting. For proper garlic drying and collection, the harvester discharged the harvested garlic on the ground uniformly at the angles of 135。∼150。 to its forward direction with the garlic bulb's placing toward the harvester. In the field tests, it was recommended that the forward speed of the harvester be approximately less than 0.2m/s, and that the spacing of planting garlic seeds should be standardized in the future fur increasing its harvesting efficiency.

• Proceeding of EDISON Challenge
• /
• 2016.03a
• /
• pp.473-476
• /
• 2016

In this study, important design factors in Jansen leg mechanism by which two legs can be driven by only one input like a motor are considered through method of transmitting motion in three-bar linkage and Grashof law in four-bar linkage. In preliminary design, by using EDISON m-sketch and its simulation which can observe trace of feet, two identical four-bar linkages are initially designed and two three-bar linkages are added to four-bar linkages sequentially. By analyzing GL(Ground Length) and GAC(Ground Angle Coefficient), the adequacy of the preliminary design was estimated. Final design of walking apparatus is implemented using CAD software, Assembly2 of EDISON Designer. Finally, proposals to improve software used in this study are suggested.

• The Journal of the Korea Contents Association
• /
• v.18 no.1
• /
• pp.173-184
• /
• 2018

In human walking, muscle co-contraction which produces simultaneous activities of multiple muscles is important in motor control mechanism of the central nervous system. This study aims to understand positive and negative covariation mechanism of inter-muscle activities during walking. In this study, we measured electromyography (EMG) in leg muscles. To identify motor modules, we recored EMG from 4 leg muscles bilaterally (the tibialis anterior, medial gastrocnemius, rectus femoris and medial hamstring muscles) and performed non-negative matrix factorization (NMF) and principa component analysis (PCA). Then, we computed covariation values from various combinations between muscles or motor modules and used two-way repeated measures analysis of variance to identify significantly different covariation patterns between muscle combinations. As the results, we found significant differences between covariation values of muscle combinations (p < 0.05). muscle groups within the same motor modules produced the positive covariations. However, there were strong negative covariation between motor modules. There was negative covariation in all muscle combination. Stable inter-module negative covariation suggests that motor modules may be the control unit in the complex motor coordination.

• Journal of Korean Physical Therapy Science
• /
• v.28 no.3
• /
• pp.76-87
• /
• 2021

Background: The purpose of this study was to evaluate the effects of power walking and square dancing on middle-aged women with hypertension. Design: Randomized controlled Trial. Methods: 30 middle-aged women with hypertension were selected and divided into two groups. 15 cases in the control group received routine treatment, and 15 cases in the intervention group received community vigorous walking and square dancing intervention on the basis of routine treatment. The intervention time was 40-60minutes/day, 5days/week, total 16 weeks. total cholesterol (TC), triglycerides (TG), high density lipoprotein cholesterol (HDL), low density lipoprotein cholesterol (LDL), angiotensin II (Ang II), Leptin, blood pressure, and heart rate were measured. Results: Body weight, body mass index (BMI), TC, TG, LOW-density lipoprotein, angiotensin II, leptin, systolic blood pressure and heart rate were significantly reduced after power walking and square dancing (p<0.05). After the experiment, TC and TG in the experimental group were lower than those in the control group (p<0.05), while HDL was higher (p<0.05). Conclusion: The results of this study suggest that power walking exercises and square dances are significant effects on lipid mechanism and heart rate.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2000.11a
• /
• pp.743-747
• /
• 2000

The coordinated mechanism of terrestrial vertebrates enables them to maneuver over all of the terrain conditions since they have a distinct ability to adapt to varying conditions. Their locomotions remain infinitely more advanced and elegant than that of present-day existing mechanical walking robots. However, the principles of existing walking robots are based more on technical rather than on biological concepts, yielding unstable locomotion with low speed. In order to apply these advanced biological phenomena to the mechanical design of 4-legged walking robot, modeling methods are introduced and mathematical equations are also introduced.