• Journal of Korean Society of Transportation
• /
• v.25 no.3
• /
• pp.137-144
• /
• 2007

This study involves an analytical approach to determine transit dispatching schedules (headways) Determining a time schedule is an important process in transit system planning. In general, the transit headway should be shorter during the peak hour than at non-peak hours for demand-responsive service. It allows passengers to minimize their waiting time under inelastic, fixed demand conditions. The transit headway should be longer as operating costs increase, and shorter as demand and waiting time increase. Optimal headway depends on the amount of ridership. and each individual vehicle dispatching time depends on the distribution of the ridership. This study provides a theoretical foundation for the dispatching scheme consistent with common sense. Previous research suggested a dispatching scheme with even headway. However, according to this research, that is valid for a specific case when the demand pattern is uniform. This study is a general analysis expanding that previous research. This study suggests an easy method to set a time table without a complex and difficult calculation. Further. if the time axis is changed to the space axis instead, this study could be expanded to address the spacing problems of some facilities such as roads. stations, routes and others.

• Journal of the Korean Society of Radiology
• /
• v.15 no.7
• /
• pp.943-948
• /
• 2021

The purpose of this study was to investigate changes in surface dose due to increased scattering of gamma rays from patients injected with ^99mTc and ¹⁸F, which are radioactive isotopes, in close contact with materials with high atomic number such as the walls of the stable room. Prepare ^99mTc and ¹⁸F by injecting 20 and 10 mCi respectively into the NEMA phantom, and then measuring the surface dose for 60 minutes by positioning the phantom at a height of 1 m above the surface, at a distance of 0, 5 and 10 cm from the wall, and at the same location as the phantom facing the wall. Each experiment was repeated five times for reproducibility of the experiment and one way analysis of variability (ANOVA) was performed for significance testing and Tukey was used as a post-test. The study found that surface doses of 220.268, 287.121, 243.957, and 226.272 mGy were measured at ^99mTc, respectively, in the case of empty space and in the case of 0, 5 and 10 cm, while those of ¹⁸F were measured at 637.111, 724.469, 657.107, and 640.365 mGy, respectively. In order to reduce changes in surface dose depending on the patient's location while waiting, it is necessary to keep the distance from the ground or the wall where the patient is closely adhered to, or install an air mattress, etc., to prevent the scattered lines as much as possible, considering the scattered lines due to the wall etc. in future setup of the patient waiting room and safety room, and in addition to the examination, the external skin width may be reduced.

• Journal of Practical Engineering Education
• /
• v.15 no.1
• /
• pp.209-221
• /
• 2023

In the external inspection and packaging stages of products used in the semiconductor manufacturing process, there is a problem in which particles are adsorbed to the product itself or a carrying tool due to electrostatic discharge. This study presents a methodology that can improve the problem of adsorption of particles to a product by using a practical TRIZ technique. By applying the proposed practical TRIZ-based methodology, the problem was defined, and contradictions caused by product waiting time were derived. Among the derived contradictions, physical contradictions were set and the concept of 'space separation' was applied to derive solutions such as 'installation of Ionizer' and 'improvement of the layout of the workroom'. As a result of the experiment by applying 'Ionizer Installation' and 'Workroom Layout Improvement' derived through the application of practical TRIZ, it was confirmed that the particle adsorption problem that occurs during the waiting time of the product can be solved.Through this study, it is expected that workers, facility engineers, and technical engineers working at manufacturing processes will be able to effectively solve the problems they face through creative thinking and change of ideas by using practical TRIZ techniques, and contribute to innovative technology development and productivity improvement.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.36 no.2
• /
• pp.1-13
• /
• 2008

Bus stops are places that a variety of things happen including waiting, meeting and taking breaks. Therefore, these locations need to be made to meet the usage demands. They should be landscaped to provide a comfortable and satisfying environment for users. At present, bus stops are made with artificial materials and are all unified in form without consideration to landscape, ecology and other characteristics. Users are exposed to the poor surroundings. However, if small urban parks, which are of vital importance as well as extremely convenient, were connected to bus stops, the results would be a quantitative increase in the leisure locations and a qualitative change in the form of improved landscape and various forms of parks. The research was carried out to determine the effects of connecting bus stops and small parks, and the results are as follows. First, small parks provide resting areas for waiting passengers and buses. Second, it provides presently insufficient rest areas with convenience facilities and makes it more comfortable to take buses and use the park. Third, it provides a multi-functional efficient use of space that functions as both bus stop and park. Fourth, it can be a symbolic landmark that can represent the color of the area by adding a cultural element. Fifth, the existing green space in the park can contribute to the natural environment of the city. This study deduced general problems surrounding bus stops on the basis of selected indices and researched bus stops which are being used as parks and the places which have the potential for such purposes, in order to suggest a plan of attack. In addition, this proposal can create a new form of space, the bus stop park, and try to create a module of cases to establish it.

• The Korean Journal of Air & Space Law and Policy
• /
• v.29 no.2
• /
• pp.87-108
• /
• 2014

Recent examples of abuse by black consumers (including air travellers) against emotional laborers have become a serious social issue in Korea in that they are likely to violate human rights of those laborers. Emotional labor is a form of emotion regulation that creates a publicly visible facial and bodily display, and also emotional management within the workforce that creates a situation in which the emotion management by workers can be exchanged in the marketplace. Example professions that require emotional labor are: nurses, doctors, waiting staff, and television actors. However, as the economy moves from a manufacturing to a service-based economy, many more workers in a variety of occupational fields are expected to manage their emotions according to employer demands when compared to the past. One of symptoms deriving from emotional labor is smile mask syndrome abbreviated SMS, which is a psychological disorder proposed by professor Makoto Natsume where subjects develop depression and physical illness as a result of prolonged, unnatural smiling. And higher degree of using emotion regulation on the job is related to higher levels of employees' emotional exhaustion, and lower levels of employees' job satisfaction. In most part, emotional laborers are more abused and hurt by so called black consumers who are raising complaints relating to products and services purchased against service providers for the purpose of maliciously getting compensation. Against this background, the Korean Government abolished "the Consumer Protection Act" and instead promulgated "the Basic Consumer Act" in September 2006 which stipulates that consumers are expected to have protection as well as responsibility and duty. The Aviation Security Act cites the examples of prohibited behaviors (unruly passengers) while they are travelling. In addition, human rights of emotional laborers could be more protected by the enhancement of etiquettes and cavalry and improvement of culture and working environment.

• The korean journal of orthodontics
• /
• v.29 no.6 s.77
• /
• pp.699-706
• /
• 1999

Anchorage plays an important role in orthodontic treatment. Endosseous implants may be considered adequate firm anchorage. However, clinicians have hesitated to use endosseous implants as orthodontic anchorage because of limited implantation space, high cost, and long waiting period before osseointegration occurs. Recently, some clinicians have tried to use titanium miniscrews and microscrews in treatment due to their many advantages such as ease of insertion and removal, low cost, immediate loading, and the ability to place microscrews in any area of alveolar bone. The author treated a case with skeletal cortical anchorage using titanium microscrew implants. During six months of orthodontic force application from skeletal cortical anchorage, the author could get 4 mm bodily retraction and intrusion of upper anterior teeth. The most outstanding result was a 1.5 mm posterior refraction of the upper posterior teeth. The titanium microscrew implants had remained firm and stable throughout treatment. These results indicate that skeletal cortical anchorage might be a very good option.

• Journal of the Korean Society for information Management
• /
• v.25 no.2
• /
• pp.115-125
• /
• 2008

The Purpose of this study was to discover the factors which motivate academic library users to use chat reference service and which demotivate academic library users to use chat reference service. To achieve the study purposes, this study conducted interview with the selected participants (Information Studies graduate students at Florida State University(FSU)) through email in April and May 2007. This study found that 1) convenience, 2) anonymity, and 3) inexpensiveness of the service served as incentives(motivators) for chat reference service consumers to use the service. On the other hand, chat reference service consumers mentioned the following factors as obstacles (demotivators) for using the service: 1) waiting time, 2) accessibility, 3) interface design, and 4) difficulties with expressing themselves in a virtual space.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.33 no.5 s.112
• /
• pp.15-30
• /
• 2005

A deserted town once vibrant with active commercial activities around a railroad station now tries to find a way to escape from depression and revive its life with a renewed civic pride. An open space adjacent to the Main Street, the commercial district of Buzzards Bay, Massachusetts, is waiting to be transformed and reconfigured to be a new ecological park to boost the economy of the community. Bridge Park is 26-acre land abutting the Cape Cod Canal with a railroad bridge as a backdrop. The existing condition of the site with a small salt marsh, woodland, lawn, and the vestige of old railroad easement along with the proximity to the commercial district poses an interesting question of how to make a medium scaled ecological park within an urban context. This paper examines the winning design proposals for the Bridge Park submitted to the International Design Competition held in April, 2005. Six winning proposals were introduced and discussed in terms of categories related to the trend of contemporary landscape design such as; 1) ecological ordinariness and geometric figures, 2) topography and spatial imagination, 3) minimal programs and open put 4) time and process oriented design, 5) park and economic effects and 6) diagrammatic plan and photo montage. Bridge Park Design Competition confirms the complex characteristics representing the contemporary landscape design overcoming the dichotomy between nature and culture and the 'pastoral ecological design' and 'landscape as an art'. The Park becomes the activating agent for the community rejecting the conventional and passive role as a romantic picturesque landscape. Bridge Park International Design Competition is a meaningful event to test the idea of new ecological urban park, and to fine-tune the trend of the contemporary urban park design.

• The Journal of the Korea Contents Association
• /
• v.18 no.3
• /
• pp.34-40
• /
• 2018

In this study, the optimal buffer size is calculated for seamless video playback on a mobile device. Buffer means the memory space for multimedia packet which arrives in mobile device for video play such as VOD service. If the buffer size is too large, latency time before video playback can be longer. However, if it is too short, playback service can be paused because of shortage of packets arrived. Hence, the optimal buffer size insures QoS of video playback on mobile devices. We model the process of buffering into a discret-time queueing model. Mean busy period length and mean waiting time of Geo/G/1 queue with N-policy is analyzed. After then, we uses the main performance measures to present numerical examples to decide the optimal buffer size on mobile devices. Our results enhance the user satisfaction by insuring the seamless playback and minimizing the initial delay time in VOD streaming process.

• Proceedings of the Korea Society for Simulation Conference
• /
• 2001.10a
• /
• pp.9-10
• /
• 2001

Simulation has been evolved with the advance of computer and technique of modeling application systems. Early simulations were numerical analysis of engineering models known as continuous simulation, analysis of random events using various random number generators thus named as Monte Carlo simulation, iud analysis o(\\\\`queues which are prevalent in many real world systems including manufacturing, transportation, telecommunication. Discrete-event simulation has been used far modeling and analyzing the systems with waiting lines and inefficient delays. These simulations, either discrete-event, continuous, or hybrid, have played a key role in industrial age by helping to design and implement the efficient real world systems. In the information age which has been brought up by the advent of Internet, e-business has emerged. E-business, any business using Internet, can be characterized by the network of extended enterprises---extended supply and demand chains. The extension of value chains spans far reaching scope in business functions and space globally. It also extends to the individual customer, customer preferences and behaviors, to find the best service and product fit for each individual---mass customization. Simulation should also play a key role in analyzing and evaluating the various phenomena of e-business where the phenomena can be characterized by dynamics, uncertainty, and complexity. In this tutorial, applications of simulation to e-business phenomena will be explained and illustrated. Examples are the dynamics of new economy, analysis of e-business processes, virtual manufacturing system, digital divide phenomena, etc. Partly influenced by e-business, a new trend of simulation has emerged called agent-based simulation, Agent-based simulation is a technique of simulation using software agent that have autonomy and proactivity which are useful in analyzing and integrating numerous individual customer's behavior. One particular form of agent-based simulation is swarm. This tutorial concludes with the illustration of swarm or swarm Intelligence applied to various e-business applications, and future directions and implications of this new trend of simulation.