• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.52 no.4
• /
• pp.387-392
• /
• 2007

The effect of mixed treatments of wood vinegar and sulfonylurea-based herbicides on weed control, yield and yield components, and quality of rice was investigated. Two herbicides were tested namely: imazosulfuron-ethyl+thiobencarb[ethyl-1-(2-chloroimidazo[1,2-$\alpha$]pyridin-3-ylsulfonyl)-3-(4,6-dimethoxypyrimidin-2-yl) urea+S-4-chlorobenzyl diethyl(thiocarbamate)], and bensulfuronmethyl+butachlor [methyl $\alpha$-[(4,6-dimethoxypyrimidin-2-ylcarbamoyl)sulfamoyl]-o-toluate+N-butoxymethyl-2-chloro-2',6'-diethylacetanilide]. The experiment was carried out in a randomized complete block design with 3 replications and 5 treatments. Treatments used were recommended(RH: 100%) and half-recommended(HRH: 50%) application rates of each herbicide. Half-recommended application rates were combined with 1 mL wood vinegar $500mL\;water^{-1}$(500) and 1 mL wood vinegar $1000mL\;water^{-1}$(1000) wood vinegar. Plots for no herbicide treatments were also prepared and used as control. Results showed that wood vinegar significantly increased efficacy of HRH in bensulfuron-methyl+butachlor while high efficacy was already obtained in HRH treatment of imazosulfuron-ethyl+thiobencarb. Wood vinegar did not improve the efficacy of imazosulfuron-ethyl+thiobencarb but improved rice yield. Significantly similar rice yields were obtained in the HRH+1000 WV and RH treatments of both herbicides. There were no significant variations in the yield components among the treatments; however, differences in yield can be attributed to the variations in the spikelet number and ripening ratio. Data on rice quality analysis did not show clear trend on the effects of the treatments on grain appearance and nutritional quality.

• Structural Engineering and Mechanics
• /
• v.66 no.2
• /
• pp.273-283
• /
• 2018

Currently, the dynamic amplification effect of suction is described using the wind vibration coefficient (WVC) of external loads. In other words, it is proposed that the fluctuating characteristics of suction are equivalent to external loads. This is, however, not generally valid. Meanwhile, the effects of the ventilation rate of louver on suction and its WV are considered. To systematically analyze the effects of the ventilation rate of louver on the multi-dimensional WVC of ultra-large cooling towers under suctions, the 210 m ultra-large cooling tower under construction was studied. First, simultaneous rigid pressure measurement wind tunnel tests were executed to obtain the time history of fluctuating wind loads on the external surface and the internal surface of the cooling tower at different ventilation rates (0%, 15%, 30%, and 100%). Based on that, the average values and distributions of fluctuating wind pressures on external and internal surfaces were obtained and compared with each other; a tower/pillar/circular foundation integrated simulation model was developed using the finite element method and complete transient time domain dynamics of external loads and four different suctions of this cooling tower were calculated. Moreover, 1D, 2D, and 3D distributions of WVCs under external loads and suctions at different ventilation rates were obtained and compared with each other. The WVCs of the cooling tower corresponding to four typical response targets (i.e., radial displacement, meridional force, Von Mises stress, and circumferential bending moment) were discussed. Value determination and 2D evaluation of the WVCs of external loads and suctions of this large cooling tower at different ventilation rates were proposed. This study provides references to precise prediction and value determination of WVC of ultra-large cooling towers.

• Food Science and Biotechnology
• /
• v.17 no.6
• /
• pp.1221-1227
• /
• 2008

The application of the cellulase gene (celA) as a selection marker of food-grade integration system was investigated in Lactobacillus (Lb.) casei, Lactococcus lactis, and Leuconostoc (Leu.) mesenteroides. The 6.0-kb vector pOC13 containing celA from Clostridium thermocellum with an integrase gene and a phage attachment site originating from bacteriophage A2 was used for site-specific recombination into chromosomal DNA of lactic acid bacteria (LAB). pOC13 was also equipped with a broad host range plus replication origin from the lactococcal plasmid pWV01, and a controllable promoter of nisA ($P_{nisA}$) for the production of foreign proteins. pOC13 was integrated successfully into Lb. casei EM116, and pOC13 integrants were easily detectable by the formation of halo zone on plates containing cellulose. Recombinant Lb. casei EM 116::pOC13 maintained these traits in the absence of selection pressure during 100 generations. pOC13 was integrated into the chromosome of L. lactis and Leu. mesenteroides, and celA acted as an efficient selection marker. These results show that celA can be used as a food-grade selection marker, and that the new integrative vector could be used for the production of foreign proteins in LAB.

• Proceedings of The Korean Society of Agricultural and Forest Meteorology Conference
• /
• 2015.08a
• /
• pp.18-28
• /
• 2015

Apple is cultivated under various climatic conditions in many parts of the world. Better understanding of how climate, genotype, soil, and management factors interact to determine crop productivity will improve our ability to optimize crop selection, management strategies, and resource use efficiencies. We developed and applied a physiology-based apple canopy model to evaluate how climatic factors and crop phenotypes interact to determine biomass accumulation, radiation use efficiency (RUE), and water use efficiency (WUE) at multiple production sites between western and eastern states of the US including WA, CA, NY, WV, and PA. Our results indicate that solar radiation is a dominant factor limiting biomass production in the eastern states while VPD is the primary factor governing crop water use across eastern and western states during the peak growing season. Crop RUE and WUE were strongly correlated in the western states but not in the eastern states while VPD showed highly negative correlation with both RUE and WUE across all locations. The RUE improved with increasing fraction of diffuse radiation ($f_{df}$) and the $RUE-f_{df}$ relationships revealed distinctive responses between western and eastern states. Overall, the eastern locations exhibited slightly higher RUE and WUE than the western locations. However, overall productivity and total water use were greater in the western states. A clear decline of productivity with increasing temperature and afternoon VPD past an optimum was predicted in the western locations but this pattern was less clear in the eastern locations. We also discuss potential phenotypes with specific physiological and morphological traits that are differentially suitable for western and eastern locations. Our results provide plausible, spatially explicit explanations and insights to disentangle the complex relationships between crop productivity, resource use efficiencies, phenotype, and climate drivers in apple grown in the US.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.30 no.2
• /
• pp.188-202
• /
• 1997

The seasonal variability of the sea surface winds over the last Sea of Korea (Japan Sea) is investigated by means of empirical orthogonal function (EOF) analysis. The combined representation of fields of three climatic variables by empirical orthogonal functions is discussed. The eigenvectors are derived from daily sea level pressure, wind speed and 10-day mean sea surface temperature (SST) during 15 years $(1978\~1992)$. The spatial patterns of the mean pressure are characterized by the high pressure in the western part and the low pressure in the eastern part. The spatial distribution of the standard deviation (SD) of pressure are characterized by max SD of 6.6 mb near the Vladivostok, and minima along the coast of the Japan. In Vladivostok, the maxima of SD of SST and south-north wind (WV) were also occurred. The representation of fields of individual meteorological variables by EOF shows that the first mode of the west-east wind (WU) explain over $47.3\%$ of the variance and the second mode of WU represents $30\%$. Especially, the first mode of the WV explain $70.9\%$ of the variance and their time series coefficients show 1-cpy, 0.5-cpy frequency spectrum. The spatial distribution of the first mode eigenvectors of SST are characterized by maximum near Vladivostok. The combined representation of fields of several variables (pressure, wind, SST) reveals that the first mode magnitudes of the variance of the combined eigenvectors (WU-PR) are increased. By means of this result, the 1-year peak and the 6-months peak are remarkable. In the three combined patterns (wind, pressure, SST), the second mode of the eigenvector (wind) is affected by the SST. Their time coefficients of the first mode show noticeable 1-year peak. The spectral analysis of the second mode shows broad seasonal signal with the period of 4-months and a significant peak of variability at 3-month period.

• Radiation Oncology Journal
• /
• v.21 no.4
• /
• pp.322-329
• /
• 2003

Purpose: It is difficult to exactly determine the surface dose and the dose distribution In buildup region of high energy X-rays by using the conventional ion chamber. The aim of this study Is to evaluate the accuracy of widely used dosimetry systems to measure the surface dose and the depth of maximum dose (d$_{max}$). Materials and Methods: We measured the percent depth dose (PDD) from the surface to the d$_{max}$ in either a water phantom or in a solid water phantom using TLD-100 chips, thimble type ion chamber, diode detector, diamond detector and Markus parallel plate ion chamber for 6 MV and 15 MV X-rays, 10$\times$10 cm$^{2}$, at SSD=100cm. We analysed the surface dose and the d$_{max}$. In order to verify the accuracy of the TLD data, we executed the Monte Carlo simulation for 5 MV X-ray beams. Results: The surface doses In 6 MV and IS MV X-rays were 29.31% and 23.36% ior Markus parallel plate ion chamber, 37.17$\%$ and 24.01$\%$ for TLD, 34.87$\%$ and 24.06$\%$ for diamond detector, 38.13$\%$ and 27.8$\%$ for diode detector, and 47.92$\%$ and 35.01$\%$ for thimble type ion chamber, respectively. in Monte Carlo simulation for 6 MV X-rays, the surface dose was 36.22$\%$, which Is similar to the 37.17$\%$ of the TLD measurement data. The d$_{max}$ In 6 WV and 15 MV X-rays was 14$\~$16 mm and 27$\~$29 mm, respectively. There was no significant difference in the d$_{max}$ among the detectors. Conclusion: There was a remarkable difference in the surface dose among the detectors. The Markus parallel plate chamber showed the most accurate result. The surface dose of the thimble ion chamber was 10$\%$ higher than that of other detectors. We suggest that the correction should be made when the surface dose of the thimble ion chamber Is used for the treatment planning ion the supeficial tumors. All the detectors used In our study showed no difference in the d$_{max}$.

• Clean Technology
• /
• v.19 no.2
• /
• pp.148-155
• /
• 2013

Volatile fatty acids (VFAs) production from marine brown algae, Saccharina japonica, was investigated in anaerobic dark fermentation. In order to evaluate the VFAs productivity, various experimental parameters (i.e., physicochemical pre-treatment, microorganism inoculation ratio, substrate concentration, and pH) were evaluated. According to the physicochemical pre-treatment methods, the maximum concentrations of VFAs were obtained in the order of sulfuric acid, subcritical water and subcritical water with lipid-extraction. Also, we investigated the operating parameters such as microorganism inoculation ratio (MV/M = 10 to 30), the substrate concentration (18.0 to 72.0 g/L) and pH (6.0 to 7.0) in sulfuric acid pre-treatment method. When the substrate concentrations were 18.0, 36.0, 54.0 and 72.0 g/L at $35^{\circ}C$, microorganism inoculation ratio 15, pH 7.0 for 372 hours, the maximum concentrations of VFAs were respectively 9.8, 13.9, 18.6 and 22.3 g/L. The change in VFAs concentrations was detected that acetic- and propionic acids increased according to increasing pH, while the butyric acid increased with decreasing pH. The VFAs obtained from concentration and separation process may be used as basic chemistry materials and bio-fuel, and they will expect to produce alternative energy of fossil fuel.

• Microbiology and Biotechnology Letters
• /
• v.33 no.4
• /
• pp.241-247
• /
• 2005

A new lactococcal shuttle/expression vector for lactococci, pWgal13T, was constructed using a $\beta$-galactosi-dase gene (lacZ) from Lacfococcus lactis ssp. lactis ATCC 7962 as a screening marker. The pWgal 13T was introduced into Escherichia coli DH5a and L. lactis MG1363, and was easily detected by the formation of blue colonies on a medium containing X-gal without any false transformants. Also, the quantitatively lacZ activity of pWgal13T was measured in L. lactis ssp. cremoris MG1363, and was found to be four times higher than that of L. lactis ssp. lactis ATCC7962 grown on a medium containing glucose, which shows that the lacZ gene of pWgal13T can be used for the efficient screening of L. lactis on general media. The pWgal13T was equipped with a lactococcal replicon of pWV01 from L. lactis Wg2, the new promoter P13C from L. lactis ssp. cremoris LM0230, multiple cloning sites, and a terminator for the expression of a relevant gene. The vee-tor pWgal13T was used for the expression of the EGFP gene in E. coli and L. lactis. These results show that the lactococcal expression/shuttle vector constructed in the present study can be used for the production of foreign proteins in E. coli and L. lactis.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.12 no.1
• /
• pp.1-6
• /
• 1979

본연구에서는 그물어구의 상사를 지배하는 무차원수 K를 $$K=\frac{{\nu}^n\rho_wv^{2-n}}{{d^{1+n}(\rho-\rho_w)}$$ d, p: 재료의 직경 및 밀도 $\nu,\rho_w,v$: 물의 동점성계수, 밀도 및 속도으로 정하고, 여기에서의 직경의 비를 결정하는 방법에 따라 실물과 모형과의 상사를 완전하게 그리고 근사적으로 만족시키는 조건들을 구하였다. 즉, 원전한 상사한 경우는 직경의 비를 축척비와 같게 하고, 나아가서 다른 모든 치수의 비도 축척비와 같게 함으로써 만족된다고 하였으며, 측사적 상사의 경우느 직경의 비가 축척비 $(\frac{\lambda_2}{\lambda_1})$와 같지 않아도 된다고 하여, 그물실의 직경 d, 코의 크기 $\iota$ 및 콧수 N의 비를 $$\frac{d_2}{d_1}=\frac{\iota_2}{\iota_1}=\frac{\lambda_2}{\lambda_1}{\cdot}\frac{N_1}{N_2}$$ 으로, 줄의 직경 d', 길이 $\iota'$ 및 밀도 $\rho'$의 비를 $$\frac{d_2'}{d_1'}=\sqrt{{\frac{\lambda_2}{\lambda_1}}\cdot{\frac{d_2}{d_1}}\cdot{\frac{\rho_2-\rho_{w2}}{\rho_1-\rho_{w1}}\cdot{\frac{\rho_1'-\rho_{w1}}{\rho_2'-\rho_{w2}}}}$$, $\frac{\iota_2'}{\iota_1'}=\frac{\lambda_2}{\lambda_1}$로, 부속구의 치경 $d'$, 밀도 $\rho'$ 및 수 $N'$의 비를 $$\frac{N_2'}{N_1'}=(\frac{\lambda_2}{\lambda_1})^2(\frac{d_2}{d_1})(\frac{d_1'}{d_2'})\frac{(\rho_2-\rho_{w2})}{(\rho_1-\rho_{w1})}\frac{(\rho_1'-\rho_{w1})}{(\rho_2'-\rho_{w2})}$$으로 정하였다. 이렇게 정해진 모형어구에 대해 유속 v의 비느 $K_1=K_2$로부터 $$(\frac{u_2}{u_1})^{2-n}=(\frac{\nu_2}{\nu_1})^{-n}\;(\frac{\rho_{w1}}{\rho_{w2}})\;(\frac{\rho_2-\rho_{w2}}{\rho_1-\rho_{w1}})\;(\frac{d_2}{d_1})^{1+n}$$으로 주어지므로, 이를 이용하여 어구저항 D 및 그물감의 다리에서의 장력 $\tau$의 비를 $$\frac{D_2}{D_1}=\frac{d_2(\rho_2-\rho_{w2})}{d_1(\rho_1-\rho_{w1})}(\frac{\lambda_2}{\lambda_1})^2$$ $${\frac{\tau_2}{\tau_1}=\frac{d_2\iota_2(\rho_2-\rho_{w2})}{d_1\iota_1(\rho_1-\rho_{w1})}\;{\cdot}\frac{\lambda_2}{\lambda_1}$$로 정하였다.

• Progress in Medical Physics
• /
• v.12 no.2
• /
• pp.125-131
• /
• 2001

We was investigate the dosimetric characteristics of the virtual wedge and it compared to the conventional fixed wedge. Also we was evaluate the quality factor of the experimental multi-channel dosimetry system for virtual wedge. Recently virtual wedge technique and wedge fraction methods are available through the computer controlled asymmetric collimator or the independent jaw in medical linear accelerator for radiation therapy. The dosimetric characteristics are interpreted by radiation field analyzer RFA-7 system and PTW-UNIDOS system. Experimental multi-channel dosimetry system for virtual wedge was consists of the electrometer, the solid detector and array phantom. The solid detectors were constructed using commercially diodes for the assessment of quality assurance in radiotherapy. And it was used for the point dose measuring and field size scanning. The semiconductor detector and ion chamber were positioned at a dmax, 5 cm, 10 cm, 20 cm depth and its specific ratio was determined using a scanning data. Wedge angles in fixed and virtual type are compared with measurements in water phantom and it is shown that the wedge angle 15$^{\circ}$, 30$^{\circ}$, 45$^{\circ}$were agree within 1$^{\circ}$ degree in 6, 10 MV photon beams. In PDD and beam flatness, experimental multi-channel disimetry system was capable of reproduceing the measured values usually to within $\pm$2.1% the statistical uncertainties of the data. It was used to describe dosimetric characteristics of virtual wedge in clinical photon beams. Also we was evaluate optimal use of the virtual wedge and improve the quality factor of the experimental multi-channel dosimetry system for virtual wedge.