• The Journal of the Korea Contents Association
• /
• v.12 no.4
• /
• pp.60-68
• /
• 2012

In recent years, the requirements on the high quality environment monitoring by using the sensor nodes which can handle the multimedia data in WSN have been increased. However, because the volume of multimedia data is tremendous, the limited bandwidth of a wireless channel may incur the bottleneck of a system. To solve such a problem, most of the existing distributed multi-path routing protocols based on multimedia data just focused on overcoming the limited bandwidth in order to enhance the energy efficiency and the transmission rate. However, because the existing methods can not apply a key-based technique to encrypt the multimedia data, they are very weak for the security. In this paper, we propose a secure disjointed multipath routing scheme for multimedia data transmission. Since our proposed scheme divides multimedia data(eg. image) into pixels and sends them through disjointed multipath routing, it can provide security to the whole network without using the key-based method. Our experimental results show that our proposed scheme reduces about 10% the amount of the energy consumption and about 65% the amount of the missed data packets caused by malicious nodes over the existing methods on average.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.11 no.1
• /
• pp.15-21
• /
• 2011

In the range-based localization, the localization accuracy will be high dependent on the accuracy of distance measurement between two nodes. The received signal strength(RSS) is one of the simplest methods of distance measurement, and can be easily implemented in a ranging-based method. However, a RSS-based localization scheme has few problems. One problem is that the signal in the communication channel is affected by many factors such as fading, shadowing, obstacle, and etc, which makes the error of distance measurement occur and the localization accuracy of sensor node be low. The other problem is that the sensor node estimates its location for itself in most cases of the RSS-based localization schemes, which makes the sensor network life time be reduced due to the battery limit of sensor nodes. Since beacon nodes usually have more resources than sensor nodes in terms of computation ability and battery, the beacon node based localization scheme can expand the life time of the sensor network. In this paper, therefore we propose a beacon node based localization algorithm using received signal strength(RSS) and path loss calibration in order to overcome the aforementioned problems. Through simulations, we prove the efficiency of the proposed scheme.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.37C no.11
• /
• pp.1170-1181
• /
• 2012

Wireless Sensor Networks(WSNs) are used in diverse applications. In general, sensor nodes that are easily deployed on specific areas have many resource constrains such as battery power, memory sizes, MCUs, RFs and so on. Hence, first of all, the efficient energy consumption is strongly required in WSNs. In terms of event states, event-driven deliverly model (i.e. surveillance and reconnaissance applications) has several characteristics. On the basis of such a model, clustering algorithms can be mostly used to manage sensor nodes' energy efficiently owing to the advantages of data aggregations. Since a specific node collects packets from its child nodes in a network topology and aggregates them into one packet to relay them once, amount of transmitted packets to a sink node can be reduced. However, most clustering algorithms have been designed without considering can be reduced. However, most clustering algorithms have been designed without considering characteristics of event-driven deliverly model, which results in some problems. In this paper, we propose enhanced clustering algorithms regarding with both targets' movement and energy efficiency in order for applications of surveillance and reconnaissance. These algorithms form some clusters to contend locally between nodes, which have already detected certain targets, by using a method which called CHEW (Cluster Head Election Window). Therefore, our proposed algorithms enable to reduce not only the cost of cluster maintenance, but also energy consumption. In conclusion, we analyze traces of the clusters' movements according to targets' locations, evaluate the traces' results and we compare our algorithms with others through simulations. Finally, we verify our algorithms use power energy efficiently.

• Journal of Internet Computing and Services
• /
• v.13 no.2
• /
• pp.59-71
• /
• 2012

PKI-based public key scheme is outstanding in terms of authenticity and privacy. Nevertheless its application brings big burden due to the certificate/key management. It is difficult to apply it to limited computing devices in WSN because of its high encryption complexity. The Bilinear Pairing emerged from the original IBE to eliminate the certificate, is a future significant cryptosystem as based on the DDH(Decisional DH) algorithm which is significant in terms of computation and secure enough for authentication, as well as secure and faster. The practical EC Weil Pairing presents that its encryption algorithm is simple and it satisfies IND/NM security constraints against CCA. The Random Oracle Model based IBE PKG is appropriate to the structure of our target system with one secret file server in the operational perspective. Our work proposes modification of the Weil Pairing as proper to the closed network for secret file distribution[2]. First we proposed the improved one computing both encryption and message/user authentication as fast as O(DES) level, in which our scheme satisfies privacy, authenticity and integrity. Secondly as using the public key ID as effective as PKI, our improved IBE variant reduces the key exposure risk.

• Journal of Korean Society of societal Security
• /
• v.2 no.2
• /
• pp.49-54
• /
• 2009

High incident of accidents in construction jobsite became a social problem. According to the International Labour Organization (ILO), more than 60,000 fatal accidents occur each year in construction workplace worldwide. This number of accidents accounts for about 17 percent of all fatal workplace accidents. Especially, accidents from struck-by and falls comprise of over 60 percent of construction fatalities. This paper introduces a prototype of a received signal strength index (RSSI)-based safety monitoring to mitigate the potential accidents caused by falls and struck-by. Correlation between signal strength and noise index is examined to create the distance profile between a transmitter and a receiver. Throughout the distributed sensor nodes attached on potential hazardous objects, the proposed prototype envisions that construction workers with a tracker-tag can identify and monitor their current working environment in construction workplace, and early warning system can reduce the incidents of fatal accident in construction job site.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.17 no.1
• /
• pp.233-241
• /
• 2013

One fundamental issue in ad hoc networks is the alternative node election problem, which reflects how well a sensor network is monitored or tracked by sensors. In this paper, we proposed EEAP(Energy-Efficient Alternative Paths). This is a method of selecting an alternative node for path routing management. When some node disconnection on the path routing, using pre-selected backup node provides immediately recover the path recovery. When selecting an alternative node of Step-Parents head node on the path management, the node's energy level and distance information are cared in context-awareness. This is not only increased the system's capacity cost effectively, but also reduce transmission power entire nodes consume energy. As a result, each node could efficiently management and improves the life time for mobile host and extends system coverage.

• Journal of KIISE
• /
• v.44 no.2
• /
• pp.213-222
• /
• 2017

The Internet of Things (IoT) technology is rapidly developing in recent years, and is applicable to various fields. A smart factory is one wherein all the components are organically connected to each other via a WSN, using an intelligent operating system and the IoT. A smart factory technology is used for flexible process automation and custom manufacturing, and hence needs adaptive network management for frequent network fluctuations. Moreover, ensuring the timeliness of the data collected through sensor nodes is crucial. In order to ensure network timeliness, the power consumption for information exchange increases. In this paper, we propose an IEEE 802.15.4e DSME-based distributed scheduling algorithm for mobility support, and we evaluate various performance metrics. The proposed algorithm adaptively assigns communication slots by analyzing the network traffic of each node, and improves the network reliability and timeliness. The experimental results indicate that the throughput of the DSME MAC protocol is better than the IEEE 802.15.4e TSCH and the legacy slotted CSMA/CA in large networks with more than 30 nodes. Also, the proposed algorithm improves the throughput by 15%, higher than other MACs including the original DSME. Experimentally, we confirm that the algorithm reduces power consumption by improving the availability of communication slots. The proposed algorithm improves the power consumption by 40%, higher than other MACs.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.11
• /
• pp.51-56
• /
• 2016

In this paper, we propose an Arduino-based plant monitoring system. The proposed system is based on the Arduino platform, using an environmental sensor and a pressure sensor for measuring temperature, humidity and illuminance in order to monitor the state of the environment and the facilities of the plant. Monitoring data are transmitted to a ZigBee coordinator connected to a server through a radio frequency transceiver. When using a pressure sensor and the environment sensor data stored on the host server, checking the pressure in the environment of the plant and equipment is intended to report any alarm status to the administrator. Using a grid line-based key distribution scheme, the authentication node dynamically generates a data key to protect the monitoring information. Applying a ZigBee wireless sensor network does not require additional wiring for the actual implementation of a plant monitoring system. Possible working-environment monitoring of an efficient plant can help analyze the cause of any failure by backtracking the working environment when a failure occurs. In addition, it is easy to expand or add a sensor function using the Arduino platform and an expansion board.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.41 no.11
• /
• pp.1423-1430
• /
• 2016

The MAC protocols, which are classified into synchronous and asynchronous MAC protocol in the wireless sensor network, have actively studied. Especially, the asynchronous MAC protocol needs to research on the algorithm synchronizing between nodes, since each node independently operates in its own duty cycle. Typically, Receiver-Initiated MAC protocol is the algorithm synchronizing particular nodes by using beacon immediately transmitted by each node when it wakes up. However, the sender consumes unnecessary energy because it blankly waits until receiving the receiver's beacon, even if it does not know when the receiver's beacon is transmitted. In this paper, we propose the MAC protocol which can improve the performance by selecting an optimal node between a sender and a receiver to overcome the disadvantages. The simulation results show that the proposed algorithm improves energy efficiency and decreases average delay time than the conventional algorithm.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.35 no.5B
• /
• pp.801-808
• /
• 2010

LEACH, one of hierarchical based routing protocols, was proposed for energy efficiency which is the most important requirement of Wireless Sensor Network(WSN). LEACH protocol is composed of a cluster of certain large number of clusters, which have a cluster head and member nodes. Member nodes send sensing data to their cluster heads, and the cluster heads aggregate the sensing data and transmit it to BS. The challenges of LEACH protocol are that cluster heads are not evenly distributed, and energy consumption to transmit aggregated data from Cluster heads directly to BS is excessive. This study, to improve LEACH protocol, suggests LECEEP that transmit data to contiguity cluster head that is the nearest and not far away BS forming chain between cluster head, and then the nearest cluster head from BS transmit aggregated data finally to BS. According to simulation, LECEEP consumes less energy and retains more number of survival node than LEACH protocol.