• Journal of the Korea Institute of Military Science and Technology
• /
• v.18 no.4
• /
• pp.415-422
• /
• 2015

The flow field structures of dual jet-in-cross-flow were examined experimentally for in-lined perforated damage holes configuration using particle image velocimetry. Ensemble averaged in-plane velocity and vorticity data in the jet were determined to study the mean jet structure. Jets are formed by pressure differences between upper and lower airfoil surface. The flow structure of vicinity of the thru holes consist of a vortical structure that wrap around the jets like a horseshoe and develop further downstream through a pair of stream-wise vortices. The shape, size and location of the horseshoe vortex were found to be dependent on the angle of attack. In spite of the existence of battle damage holes, the effect on the control force was insignificant when the damage size was not large enough.

• Transactions of Materials Processing
• /
• v.11 no.6
• /
• pp.513-518
• /
• 2002

The equivalent boundary conditions have been applied to the front door panel forming process, in order to demonstrate its reliability and validity. The elongation in the bead forming process is applied to the binder wrap process as the equivalent displacement boundary condition and the restraining force in the drawing process is applied to stamping process as the equivalent force boundary condition. The result calculated with the equivalent boundary conditions shows closer coincidence with the experimental result than simulation with different boundary conditions. The numerical result fully demonstrates that drawbead forming simulation for calculation of equivalent boundary conditions is necessary and effective.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.26 no.2
• /
• pp.184-193
• /
• 2002

This study aims at the optimal design of the screw rotor and its performance analysis. The optimal design of the screw rotor's shape has been performed theoretically. Also, the performance analysis technique of an oil-injected screw air compressor is developed. The effect of internal leakage, heat exchange between air and oil, and flow resistance at suction and discharge ports are included in the performance analysis. Some numerical examples of the volumetric efficiency and adiabatic efficiency for sample rotors are demonstrated for various lobe combination, rotor wrap angles and L/D ratios.

• The Mathematical Education
• /
• v.52 no.1
• /
• pp.111-128
• /
• 2013

The purpose of this study was to examine and analyze the cognitive demand of the mathematical tasks suggested in the middle school textbooks. In particular, it aimed to reveal the overall picture of the level of cognitive demand of the mathematical tasks in the strand of geometry in the textbooks. We adopted the framework for mathematical task analysis suggested by Stein & Smith(1998) and analyzed the mathematical tasks accordingly. The findings from the analysis showed that 95 percent of the mathematical tasks were at high level and the rest at low level in terms of cognitive demand. Most of the mathematical tasks in the textbooks were algorithmic and focused on producing correct answers by using procedures. In particular, the high level tasks were presented at the end of each chapter or unit for wrap up rather than as key resources.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2018.05a
• /
• pp.284-284
• /
• 2018

대부분의 물분쟁의 경우 강 또는 호수를 공유하고 있는 국가 간에 발생하고 있으며 국내에도 제한된 물로 인하여 다양한 지역에서 물 분쟁이 발생하고 있다. 이렇듯 물 부족으로 인한 물분쟁 현상은 점차 심화되고 있으며 특히 강을 공유하고 있는 인접지역에서 발생할 가능성이 높아지고 있다. 본 연구에서 Water Rights Analysis Package (WRAP) 모델의 국내 적용을 위한 기초자료 구축단계로서 수위별로 되어 있는 수위-유량 관계 곡선식을 단순화하여 자연하천유량 산정을 위한 절차를 간편화하였다. 첫째, 확률 분포곡선을 이용한 수위 자료 구간별 구분; 둘째, 구분된 수위 자료에 대한 회귀 분석 실시; 셋째, 실측 유량 자료 및 모의 유량 자료를 이용한 신뢰도 산정 및 비교를 통한 본 연구결과에 대한 타당성 검토를 수행하였다.

• Structural Engineering and Mechanics
• /
• v.72 no.2
• /
• pp.155-168
• /
• 2019

This paper presents the results of an experimental investigation on the compressive strength of small scale concentrically axially loaded fiber-reinforced polymer (FRP) confined plain concrete columns, with cylinder concrete strength 19 MPa. For columns with circular (150-mm diameter) and square (150-mm side) cross sections wrapped with glass- and carbon-FRP sheets (GFRP and CFRP, respectively) applied with dry lay-up the effect of different jacket schemes and different overlap configurations on the confined characteristics is investigated. Test results indicate that the most cost effective jacket configuration among those tested is for one layer of CFRP, for both types of sections. In square sections the location of the lap length, either in the corner or along the side, does not seem to affect the confined performance. Furthermore, in circular sections, the presence of an extra wrap with FRP fibers parallel to the column's axis enhances the concrete strength proportionally to the axial rigidity of the FRP jacket. The recorded strains and the distributions of lateral confining pressures are discussed. Existing design equations are used to assess the lateral confining stresses and the confined concrete strength making use of the measured hoop strains.

• Proceedings of the KSR Conference
• /
• 2009.05b
• /
• pp.585-592
• /
• 2009

The performance of screw compressor depends on lots of design parameters of rotor profile, such as length of seal line, wrap angle, blow hole, suction and discharge port size, number of rotor lobe, etc. The optimum rotor profile makes it possible to increase the compression efficiency with low energy consumption, and to minimize the loss of power. In this research, a new rotor profile design and performance analysis are done by computer simulation. It is expected that the volumetric efficiency is improved because the internal leakage is reduced due to the minimization of blow hole and clearance, and the stiffness of rotors is increased due to the reduction of length to diameter ratio. Also, the specific power consumption will be secured for use ranging from low to high operation speed.

• Structural Engineering and Mechanics
• /
• v.60 no.6
• /
• pp.979-999
• /
• 2016

Stainless steel wire mesh (SSWM) is an alternative material for strengthening of structural elements similar to fiber reinforced polymer (FRP). Finite element (FE) method based Numerical investigation for evaluation of axial strength of SSWM strengthened plain cement concrete (PCC) and reinforced cement concrete (RCC) columns is presented in this paper. PCC columns of 200 mm diameter with height 400 mm, 800 mm and 1200 mm and RCC columns of diameter 200 mm with height of 1200 mm with different number of SSWM wraps are considered for study. The effect of concrete grade, height of column and number of wraps on axial strength is studied using finite element based software ABAQUS. The results of numerical simulation are compared with experimental study and design guidelines specified by ACI 440.2R-08 and CNR-DT 200/2004. As per numerical analysis, an increase in axial capacity of 15.69% to 153.95% and 52.39% to 109.06% is observed for PCC and RCC columns respectively with different number of SSWM wraps.

• International Journal of Advanced Culture Technology
• /
• v.9 no.1
• /
• pp.183-189
• /
• 2021

This study examines the effects of Korean college students' English proficiency and the English text types on their paraphrases. Korean college students with three groups of English proficiency (high, mid, and low) read two types of English texts, causal texts, and argumentative texts, and paraphrased them in English. Students' paraphrase text was evaluated in terms of content (idea exposition, idea development, and wrap up), organization (coherence and cohesion) and language use (grammatical accuracy), and analyzed by MANOVA. As a result, it was found that there was a significant difference in their paraphrase performance according to the participants' English proficiency levels rather than the types of English texts. The results of this study have educational implications for English paraphrase education to prevent plagiarism for Korean university students.

• Journal of Chest Surgery
• /
• v.54 no.4
• /
• pp.314-318
• /
• 2021

In this paper, I present the technique of subxiphoid single-port video-assisted thoracic surgery (VATS) thymectomy for thoracic surgeons to perform this procedure safely. This procedure is indicated for all anterior mediastinal masses and may be extended to lung cancer. The patient is placed in the lithotomy position, and the operator should be on the midline. Below the xiphoid process, a skin incision is made 4-5 cm horizontally at a single thumb's width down. Under two-lung ventilation, CO₂ is insufflated, maintaining 10 mm Hg. The fat tissue and thymic tissue are all resected from the sternum and pericardium between both phrenic nerves using an articulated grasper and an energy device. After retrieval of the mass with a wrap bag, a Jackson-Pratt drain is inserted instead of a chest tube. One of the advantages of this procedure is less postoperative pain than intercostal VATS. The subxiphoid approach can be used for bilateral pneumothorax, bilateral pulmonary metastasectomy, and simple lobectomy for both upper lobes and the right middle lobe.