• Journal of the Korean Ceramic Society
• /
• v.52 no.6
• /
• pp.514-520
• /
• 2015

$KY_{1-x}(WO_4)_2:Ho^{3+}/Yb^{3+}$ yellow phosphors with doping concentrations of $Ho^{3+}$ and $Yb^{3+}$ ($x=Ho^{3+}+Yb^{3+}$, $Ho^{3+}=0.05$, 0.1, 0.2 and $Yb^{3+}=0.2$, 0.45) were successfully prepared using the microwave-modified sol-gel method; their upconversion (UC) photoluminescence properties were investigated in detail. Well-crystallized particles, formed after heat-treatment at $900^{\circ}C$ for 16 h, showed a fine and homogeneous morphology with particle sizes of $2-5{\mu}m$. Under excitation at 980 nm, the UC $KY_{0.7}(WO_4)_2:Ho_{0.1}Yb_{0.2}$ and $KY_{0.5}(WO_4)_2Ho_{0.05}Yb_{0.45}$ particles exhibited excellent yellow emissions based on a strong 545-nm emission band in the green region and a very strong 655-nm emission band in the red region. Pump power dependence and Commission Internationale de L'Eclairage chromaticity of the UC emission intensity were evaluated. The spectroscopic properties were examined comparatively using Raman spectroscopy.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2012.05a
• /
• pp.109.1-109.1
• /
• 2012

본 연구에서는 co-sputtering을 통한 $WO_3$와 $In_2O_3$ 타겟을 사용하여 $WO_3$ 파워에 따른 Tungsten(W)-doped $In_2O_3$ (IWO) 투명 전극의 전기적, 광학적, 구조적 특성을 연구하고 이를 활용한 유기태양전지(Organic Photovoltaics; OPVs)의 특성을 분석하였다. Tungsten의 doping 농도는 $WO_3$에 인가되는 Radio-frequency (RF) power를 5~30 W 까지 변화시켜 조절하였으며, Rapid Thermal Annealing (RTA) 후 열처리 공정을 통해 IWO 박막의 전기적, 광학적, 구조적 특성을 분석하였다. Hall measurement 및 UV/Vis spectrometry 분석을 통하여 가시광선 영역에서 80% 이상의 높은 투과율, $48\;cm^2\;V^{-1}\;s^{-1}$의 홀 이동도, 20 ${\Omega}/{\Box}$ 이하의 낮은 면저항과 $3.2{\times}10^{-4}\;{\Omega}-cm$의 비저항 값을 나타내었다. 최적화된 IWO 박막을 이용한 OPV 셀 특성은 fill factor(FF): 61.59 %, short circuit current($J_{SC}$): 8.84 $mA/cm^2$, open circuit voltage($V_{OC}$): 0.60 V, efficiency(PCE): 3.27 %로 ITO로 제작된 OPV 샘플과 비교하였을 때 ITO를 대체할 수 있는 고이동도의 새로운 투명 전극 재료로서의 가능성을 확인하였다.

• Journal of Sensor Science and Technology
• /
• v.25 no.3
• /
• pp.223-228
• /
• 2016

In this work, we prepared porous WO3 nanofibers (NFs) functionalized by bio-inspired catalytic $Cr_2O_3$ and $Co_3O_4$ nanoparticles as highly sensitive and selective $H_2S$ gas sensing layers. Highly porous 3-dimensional (3D) NFs networks decorated by well-dispersed catalyst NPs exhibited superior $H_2S$ gas response ($R_{air}/R_{gas}$ = 46 at 5 ppm) in high humidity environment (95 %RH). In particular, the sensors showed outstanding $H_2S$ selectivity against other interfering analytes (such as acetone, toluene, CO, $H_2$, ethanol). Exhaled breath sensors using $Cr_2O_3$ and $Co_3O_4$ catalysts-loaded $WO_3$ NFs are highly promising for the accurate detection of halitosis.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.12 no.3
• /
• pp.133-137
• /
• 2002

$ZnWO_4$ nano-powders were successfully synthesized at low temperature by polymerized complex method using zinc acetate and tungstic acid as starting materials. The polymeric precursors were heat-treated at temperatures from 300 to $600^{\circ}C$ for 3 h. The precursors and heat-treated powders were evaluated for crystallization process, thermal decomposition, surface morphology and crystallite size. Crystallization of the $ZnWO_4$ powders were detected at $400^{\circ}C$ and entirely completed at a temperature of $600^{\circ}C$. The particles heat-treated at $400^{\circ}C$ showed primarily co-mixed morphology with spherical and silk-worm-like forms, while the particles heat-treated at $500^{\circ}C$ showed more homogeneous morphology. The average crystalline sizes were 17.62~24.71 nm showing an ordinary tendency to increase with the temperatures from 400 to $600^{\circ}C$.

• KSBB Journal
• /
• v.5 no.3
• /
• pp.215-221
• /
• 1990

The solubilization of BSA, pepsin, trypsin and ribonuclease-a in cationic reverse micellar solutions has been investigated. For complete solubilization into reverse micellar solutions, pH values of several pH units above the isoelectric point of each protein were required. Solubilization was observed to decrease with increasing ionic strength of KCI. The size of empty micelles showed no significant change with increasing ionic strength. Trioctylmethyl ammonium chloride (TOMAC) in cyolohexane showed the lowest solubilization for the proteins. The system didodecyl dimethyl ammonium bromide (DDAB)-tetrachloroethylene was capable of solubilizing larger amounts of proteins than the system DDAB-benzene. Cetyl trimethyl ammonium bromide(CTAB)-hexanol-isooctane system showed lower solubilization than DDAB-tetrachloroethylene system, while it had higher Wo value.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2015.08a
• /
• pp.191.1-191.1
• /
• 2015

최근에 백색 발광다이오드를 개발하기 위한 고효율의 형광체 개발에 많은 연구가 집중되고 있다. 본 연구에서는 $La_2WO_6$ 모체 결정에 다양한 활성제 이온인 $Eu^{3+}$, $Dy^{3+}$, $Sm^{3+}$, $Tb^{3+}$를 각각 도핑하여 다양한 발광 파장을 갖는 고효율의 형광체를 제조하였다. 합성한 형광체 분말은 초기물질 $La_2O_3$, $WO_3$, 희토류 원소 ($Eu_2O_3$, $Dy_2O_3$, $Sm_2O_3$, $Tb_4O_7$)를 각각 화학양론적으로 준비하여 고상반응법으로 제조하였으며, 이때 하소 공정은 $400^{\circ}C$에서 3시간, 소결 공정은 $1050^{\circ}C$에서 5시간 유지하여 합성하였다. $La_2WO_6:Eu^{3+}$ 형광체 분말의 경우에 320, 395, 465 nm에서 강한 흡광 파장이 발생하였으며, 파장 320 nm로 여기 시켰을 때 최대 발광 세기는 618 nm에서 관측되었다. $Sm^{3+}$을 도핑한 형광체의 흡광 스펙트럼은 310, 375, 406, 475 nm에서 발생하였으며, 310 nm로 여기 시켰을 때 602 nm의 강한 주황색 발광 신호가 나타났다. $Dy^{3+}$가 도핑된 $La_2WO_6$ 형광체는 575 nm에 강한 발광 피크를 갖는 황색을 나타내었으며, 흡광 파장은 313 nm 이었다. $Tb^{3+}$를 도핑한 형광체의 주 흡광 스펙트럼은 316 nm에서 발생하였고, 발광 스펙트럼은 545 nm에 피크를 갖는 녹색 발광 신호가 나타났다. 활성제이온의 종류에 따른 형광체의 흡광과 발광, 결정 구조의 특성을 체계적으로 제시하고자 한다.

• Korean Journal of Materials Research
• /
• v.28 no.1
• /
• pp.12-17
• /
• 2018

$In_2O_3$ doped $WO_3$ powders were prepared by a polymer solution route and their $NO_2$ gas sensing properties were analyzed. The synthesized powders showed nano-sized particles with specific surface areas of $6.01{\sim}21.5m^2/g$ and the particle size and shape changed according to the content of $In_2O_3$. The gas sensors fabricated with the synthesized powders were tested at operating temperatures of $400{\sim}500^{\circ}C$ and 100~500 ppm concentrations of $NO_2$ atmosphere. The particle size and $In_2O_3$ content affected on the initial sensor resistance in an air atmosphere. The highest sensitivity (8.57 at $500^{\circ}C$), which was 1.77 higher than the sensor consisting of the pure $WO_3$ sample, was measured in the 0.5 mol% $In_2O_3$ doping sample. In addition, the response time and recovery time were improved by the addition of $In_2O_3$.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2009.11a
• /
• pp.33.1-33.1
• /
• 2009

To date, nanostructured tungsten oxides with a variety of stoichiometries, such as WO3, WO2.9, W18O49, and WO2, have been prepared, because they are promising candidates for applications such as gas sensors, photocatalysts, electrochromic devices, and field emission devices. Among them, W18O49 and WO2 have been widely studied due to their outstanding chemical sensing, catalytic, and electron emissive properties. Here we report, for the first time, a one-pot solution-phase route to synthesizing a novel composite hierarchical hollow structure without adding catalysts, surfactants, or templates. The products, consisting of a WO2 hollow core sphere surrounded by a W18O49 nanorod shell (yielding a sea urchin-like structure), were generated as discrete structures via Ostwald ripening. To our knowledge, this type of composite hierarchical core/shell structure has not been reported previously. The morphological evolution and the detailed growth mechanism were carefully studied. We also demonstrate that the size of the hollow urchins is readily tunable by controlling the reactant concentrations.Interestingly, although bulk tungsten oxides are weakly paramagnetic or diamagnetic, the as-prepared products show unusual ferromagnetic behavior atroom temperature. The urchin structures also show a very high Brunauer-Emmet-Teller (BET) surface area, suggesting that they may potentially be applied to chemical sensor or effective catalyst technologies.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2002.07a
• /
• pp.127-130
• /
• 2002

In this study, development of a new LTCC material using a non-glassy system was attempted with respect to reducing the fabrication process steps and cost down. Lowering the sintering temperature can be achieved by liquid phase sintering. For LTCC application, the starting material must have quality factor as high as possible in microwave frequency range. And also, the material should have a low dielectric constant for enhancing the signal propagation speed. Regarding these factors, dielectric constants of various materials were estimated by the Clausius-Mosotti equation. Among them, CaWO$_4$ was tamed out the suitable LTCC material. CaWO$_4$ can be sintered up to 98% of full density at 1200$^{\circ}C$ for 3 hours. It's measured dielectric constant, quality factor, and temperature coefficient of resonant frequency were 10.15, 62880GHz, and -27.8ppm/$^{\circ}C$, respectively. In order to modify the dielectric properties and densification temperature, 0.5∼1.5 wt% LiF were added to CaWO$_4$. LiF addition reduced the sintering temperature/time down to 800$^{\circ}C$/10∼30min due to the reactive liquid phase sintering. Dielectric constant lowered from 10.15 to 9.38 and Q x fo increased up to 92000GHz with increasing LiF content.

• Korean Journal of Materials Research
• /
• v.22 no.5
• /
• pp.215-219
• /
• 2012

Red phosphors $Ca_{1-1.5x}WO_4:{Eu_x}^{3+}$ were synthesized with different concentrations of $Eu^{3+}$ ions by using a solid-state reaction method. The crystal structure of the red phosphors was found to be a tetragonal system. X-ray diffraction (XRD) results showed the (112) main diffraction peak centered at $2{\theta}=28.71^{\circ}$, and the size of crystalline particles exhibited an overall decreasing tendency according to the concentration of $Eu^{3+}$ ions. The excitation spectra of all the phosphors were composed of a broad band centered at 275 nm in the range of 230-310 nm due to $O^{2-}{\rightarrow}W^{6+}$ and a narrow band having a peak at 307 nm caused by $O^{2-}{\rightarrow}Eu^{3+}$. Also, the excitation spectrum presents several strong lines in the range of 305-420 nm, which are assigned to the 4f-4f transitions of the $Eu^{3+}$ ion. In the case of the emission spectrum, all the phosphor powders, irrespective of $Eu^{3+}$ ion concentration, indicated an orange emission peak at 594 nm and a strong red emission spectrum centered at 615 nm, with two weak lines at 648 and 700 nm. The highest red emission intensity occurred at x = 0.10 mol of Eu3+ ion concentration with an asymmetry ratio of 12.5. Especially, the presence of $Eu^{3+}$ in the $Ca_{1-1.5x}WO_4:{Eu_x}^{3+}$ shows very effective use of excitation energy in the range of 305-420 nm, and finally yields a strong emission of red light.