• Journal of Korean Society of Environmental Engineers
• /
• v.22 no.4
• /
• pp.609-617
• /
• 2000

This study is aimed at investigating an effect of HCl gas on selective reduction of NOx over a CuHM and $V_2O_5-WO_3/TiO_2$ catalyst. SCR process is the most effective method to remove NOx, but catalyst can be deactivated by the acidic gas such as HCl gas which is also included in flue gas from the incinerator. In dry condition of flue gas, the CuHM catalyst treated by HCl gas has shown higher NO removal activity than the fresh catalyst. The activity of the catalyst can be restored by treating at $500^{\circ}C$. On the contrary. $V_2O_5-WO_3/TiO_2$ catalyst is obviously deactivated by HCl and the deactivation increases in proportion to the concentration of HCl gas. The deactivated catalyst is not restored to it's original activity by heat treatment for regeneration. In wet flue gas stream, the CuHM catalyst has shown lower activity than fresh catalyst and $V_2O_5-WO_3/TiO_2$ catalyst was severely deactivated by HCl treatment. The activity loss of catalysts are mainly due to the decrease of Br$\ddot{o}$nsted acid site on the catalyst surface by $NH_3$ TPD. The change of BET surface area of CuHM catalyst after the reaction isn't observed but $V_2O_5-WO_3/TiO_2$ catalyst is observed. The amount of $Cu^{{+}{+}}$ and $V_2O_5$ is decreased after the reaction. From these results, it is expected that CuHM catalyst should be better than $V_2O_5-WO_3/TiO_2$ catalyst for its application to the incineration of flue gas.

• Journal of Korean Society of Forest Science
• /
• v.85 no.4
• /
• pp.634-646
• /
• 1996

This study was carried out to reveal the forest land effect on water purification in mountainous watersheds. Rainfall, throughfall, stemflow, soil and stream water were monitored by pH, electrical conductivity(EC), and dissolved oxygen(DO) in Daehan-Ri and Parkdal-Ri catchments. The results were summarized as follows; 1. Rainfall pH values of Parkdal-Ri and Daehan-Ri were 7.6 and 6.4, respectively. 2. Comparing stemflow and throughfall of Pinus densiflora with Pinus rigida, the pH values of Pinus densiflora were 4.32 and 4.22 and the pH of Pinus rigida were 3.34 and 4.81, respectively. The EC values of Pinus densiflora were $119.7{\mu}S/cm$ and $96.8{\mu}S/cm$ and EC of Pinus rigida were $230.0{\mu}S/cm$ and $82.0{\mu}S/cm$. 3. All pH values were decreased as the streamflow increased except long-term runoff in Daehan-Ri. The EC values also were increased as the streamflow increased, but EC of short-term runoff in Daehan-Ri was gradually decreased as the streamflow increased due to entrance of throughfall which has high EC values at the beginning of rainfall events. The DO concentrations of all experimental plots were elevated as the streamflow increased, because reaeration occurs at the surface of the stream as the increased discharge make turbulence. 4. pH of Stemflow and throughfall in Pinus densiflora were lower than in Quercus acutissima, but EC values were higher in Pinus densiflora. 5. Water purification was mostly influenced by forest soil in forest hydrological processes. 6. Stemflow and throughfall were more influenced by dry deposition and organic acid in crown and bark than those of wet deposition. During the stemflow and throughfall passed forest soil, these acidic stemflow and throughfall were neutralized, and stream water quality was neutral or slightly alkaline.

• Korean journal of applied entomology
• /
• v.53 no.1
• /
• pp.65-71
• /
• 2014

Frankliniella occidentalis is attracted to flowers and is a major pest of chrysanthemums. Even when some chrysanthemum plants are not flowering, the ones that have already flowered attract F. occidentalis. Therefore, we investigated the efficacy of chrysanthemum as a trap plant that attract F. occidentalis by using an olfactometer. The numbers of F. occidentalis collected from the flowers of pink, wihte and yellow standard chrysanthemums on a tray with wet paper during the flowering period were 18.4, 56.6, and 52.6 respectively; the numbers of F. occidentalis collected from leaves were 7.8, 16.6, and 15.4 respectively. the numbers of F. occidentalis collected from the buds of pink, white and yellow standard chrysanthemums were 15.2, 45.8, and 41.6 respectively; the numbers of F. occidentalis collected from the leaves were 2, 8.8 and 3.4 respectively. In the Y-tube olfactometer test, the number of F. occidentalis attracted to the 2-way arms of the Y-tube was not significantly different for the yellow, red, violet and white flowers. In the four-choice olfactometer test, when the same visual cues and odor cues were provided, the frequency of F. occidentalis was higher in the yellow (10.7) flowers than in the red (1.3), violet (3.7) and white (2.0) flowers. When visual cues with disturbed odor cues, F. occidentalis preferred yellow (10.0) color over red (3.3), violet (1.3) and white (3.0) colors. When the same visual and odor cues, except for yellow visual cues, were provided, F. occidentalis preferred white (8.3) color over red (4.7), violet (4.7) and yellow (2.0) colors. Therefore, F. occidentalis were attracted to buds before the flowering of chrysanthemum plants and attracted to yellow flowers after the flowering.

• The Journal of Korean Academy of Prosthodontics
• /
• v.19 no.1
• /
• pp.17-27
• /
• 1981

This study was conducted to determine the chemical composition and the mechanical properties of four commercially available low gold-based crown and bridge alloy produced in Korea. Four dental casting gold-silver-palladium alloys, i.e., A, B, C and D (code of alloys) were selected for the evaluation of chemical composition, ultimate tensile strength, elongation. values and Vickers hardness. The chemical composition of test specimens was analyzed by both emission spectrography and wet gravitation method with a 1.5gm of low gold ingot. The tensile properties and Vickers hardness was determined with cast specimens treated in following three conditions; as-cast, softening heat treatment and hardening heat treatment. The tensile testing bars were cast in accordance with the model designed by Gettleman and Harrison (1969) which was modified from the A. D. A. Specification No. 14 for dental chromium-cobalt casting alloy. Nine tensile test specimens were made from a split silicone mold for each of the test alloys to the size of 2.5mm in diameter and a gauge length of 10mm. All four alloys were handled in accordance with conventional methods used in Type III gold alloys. Ultimate tensile strength and elongation were measured on an Instron Universal Tensile Testing Machine (Model 1125, Japan) operated at a crosshead rate of 0.1cm/min. Elongation values were measured using Digital Measuring Microscope (MS-152, FUSOH, Japan). Vickers hardness was determined with a Vickers Hardness Tester (Model VKH-l, Japan) at a 1.0kg load on a mounted tensile test specimen. The following results were obtained from this study; 1. All tested alloys were composed of Au, Ag, Pd, Cu, Zn and Fe in common. The composition rate of gold for all four alloys was found in the range of $42{\sim}47$ weight % as shown below. Alloy A; Au 45%, Ag 40.2%, Pd 5.76%, others 9.04%. Alloy B; Au 47.1%, Ag 29.03%, Pd 6.98%, others 16.92%. Alloy C; Au 45%, .Ag 26.9%, Pd 6.83%, others 21.07%. Alloy D; Au 41.8%, Ag 34.4%, Pd 6.95%, others 16.85%. 3. The ultimate tensile strength of the four alloys was in the range of $31{\sim}82kg/mm^2$. The test results were shown in the below order from the highest value; As-cast condition; D, B, C, A. Softening heat treament; B, C, D, A. Hardening heat treatment; D, B, C, A. 4. The test :results of the elongation rate for each alloy were in the range of $0.5{\sim}18%$. The test results were shown in the below order from the highest value; As-cast condition; A, D, B, C. Softening heat treatment; A, C, D, B. Hardening heat treatment; C, D, B, A. 5. Vickers hardness for each of the four alloys was in the range of $120{\sim}230$. The test results were shown in the below order from the highest value; As-cast condition; C, B, D, A Softening heat treatment; D, B, C, A. Hardening heat treatment; D, A, C, B. 6. There were no differences in the physical properties between as-cast condition and softening heat treatment.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.40 no.8
• /
• pp.1121-1127
• /
• 2011

We evaluated the quality characteristics of adzuki bean sediment according to variety. The moisture, crude protein, and crude ash contents of the various adzuki bean varieties were 8.2~11.1, 15.4~20.6 and 3.3~3.6 g/100 g, respectively. The potassium contents of Chilbo-pat (CB) and Hongeon-pat (HE) were 875.1 and 873.1 mg/100 g, respectively. The calcium contents of Jungbu-pat (JB) and Kumsil-pat (KS)were 73.6 and 73.2 mg/100 g, respectively. A high level of magnesium (131.4 mg/100 g) was found in Yeonkeum-pat (YK). The yields of adzuki bean sediment according to variety were no different either wet (188.3~204.7%) or dry (62.1~66.0%). The L-values on sediment of YK and KS were 67.0 and 68.0, respectively; however, the CB L-value was low at 54.0. A high level of a- (6.6) and b-value (12.8) was found in YK; however, the values for CB were much lower at 3.8 and 5.9, respectively. There was no difference in particle-size distribution, water binding capacity, and solubility of adzuki bean sediment according to variety. High levels of peak (3.79 RVU), trough (3.75 RVU), final (7.33 RVU), and setback viscosity (3.54 RVU) were found in JB. The sensory properties of products in food processing are important, and the variety of adzuki bean sediment should be chosen depending on desired product characteristics.

• Food Science and Preservation
• /
• v.23 no.5
• /
• pp.746-752
• /
• 2016

This research was carried out to identify aerodynamic property as a function of moisture content for designing equipment such as for post-harvest management. Terminal velocity of two wheat varieties {Backjjung (B) and Jogyeong (J)} with selected sound, damaged kernel and foreign materials (Wheat stick, Wheat husks) were measured with a designed vertical wind column at different moisture contents from about 9 to 30% wet basis. The results showed that terminal velocity of wheat and foreign materials except of Jogyeong's husks (p<0.05) had a significant difference at p<0.001. With increasing moisture content, the aerodynamic property values of the kernels and foreign materials of the two wheat varieties increased linearly. In detail, terminal velocity of sound and damaged kernel increased from 5.46 to 7.13 m/sec (B) and 7.48 to 8.60 m/sec (J), damaged kernel from 5.91 to 7.00 m/sec (B) and 6.48 to 7.75 m/sec (J). For foreign materials the terminal velocity of wheat stick increased from 2.92 to 4.07 m/sec (B) and 3.74 to 5.22 m/sec (J) whereas that of husks from 1.07 to 1.85 m/sec (B) and 2.02 to 2.33 m/sec (J) each. For air separation of wheat and foreign materials, the air flow should be less than 5.22 m/sec due to the range (1.07~5.22 m/sec) of foreign materials in wheat.

• The korean journal of orthodontics
• /
• v.34 no.5 s.106
• /
• pp.439-447
• /
• 2004

The purpose of this study was to investigate the influence of water, saliva and blood contamination on the bonding strength of metal brackets with a self-etching primer/adhesive to enamel. Ninety-six extracted human teeth were divided into four groups. The brackets were bonded to enamel with a self- etching primer (3M/Unitek Dental Products. Monorovia California) according to one of four protocols. The teeth were bonded in a dry condition (group D) or in contamination with distilled water (group W), artificial saliva (group S). or fresh human blood (group B) Shear bond strengths were tested using an Instron Universal testing machine. After debonding. bracket and tooth surfaces were examined with a stereomicroscope. In each group, four samples were selected and examined with a Scanning electron microscope of the prepared enamel surface and resin-enamel interlace. The results obtained were summarized as follows: Shear bond Strength if group D $(15.22{\pm}2.86MPa)$ and W $(15.20{\pm}3.85 MPa)$ Were higher than in group B$(12.56{\pm}2.94MPa)$ (p<0.05). There were no statistical differences in the shear bond strengths between groups D. W and S (p>0.05). There was a tendency to have less residual adhesive remaining on the enamel surfaces of group B than group D. The SEW morphology of group D and W showed a more roughened etching pattern than group S and B. Water or saliva contamination on bending of orthodontic brackets with Transbond plus self etching primer had almost no influence on bond strength In this study, the blood contaminated group showed the lowest bond strength, but it was above the clinically acceptable bond strength (5.9-7.8 MPa, Reynold, 1975). The results of this study suggest that acceptable clinical bond strengths can be obtained in wet conditions when self-etching adhesives are used.

• Korean Journal of Environment and Ecology
• /
• v.27 no.1
• /
• pp.99-112
• /
• 2013

This study aims to show the changes of characteristics of vegetation structure for 20 years(1991~2010) in Naejangsan National Park. As a result of analysis of actual vegetation, the mixed community of Quercus variabilis and Quercus serrata was distributed with 56.1%, and Q. variabilis community showed in southern steep slope with 17.6%. Pinus densiflora community(5.8%) was observed on the ridge and Carpinu tschonoskii community distributed in the slope of the valley with 6.6%. Zelkova serrata and Prunus sargentii community were distributed in valley. The classification by TWINSPAN, ordination by DCA considering importance percentage and property of vegetation class were divided into 4 communities, which are community I(P. densiflora-Q. variabilis community), community II(Q. variabilis community), community III(C. tschonoskii community) and community IV(Mixed deciduous broad-leaved trees community). The age of Pinus densiflora was 32years old and Q. serrata was 36 years old in the community I, that of Q. variabilis was 64 years old in the community II, Q. serrata was 46 years old and C. tschonoskii was 45 years old in the community III, and Acer palmatum was 54 years old and Cornus controversa was 47 years old in the community IV. As the result of Shannon's index of species diversity, the community Iwas ranged from 0.9751 to 1.4199, community II was ranged from 1.0765 to 1.3278, community III was ranged from 1.0353 to 1.2881, and community IV was ranged from 1.1412 to 1.3807. The change of vegetation structure analyzed through the comparison with results of studies carried out 20 years ago were natural selection of P. densiflora, expansion of Quercus spp. and increase of C. tschonoskii. Especially, A. palmatum is dominated by Q. variabilis in canopy layer like the result of study 20 years ago. A. palmatum was analysed by 14.6% in the canopy layer of only mixed deciduous broad-leaved trees community. As a result of analysis of habitat property of Q. variabilis and A. palmatum, Q. variabilis was distributed in dry area with the low value of pH, O.M., exchangeable cations and Avail. P, and A. palmatum was located in the wet valley with huge value of nourishment. The tendency of reduction of bio-diversity by Sasa borealis is same as previous study but, the distributed areas were reduced in Naejangsan area.

• Tuberculosis and Respiratory Diseases
• /
• v.55 no.3
• /
• pp.257-266
• /
• 2003

Background : The surfactant protein A(SP-A) is important in the regulation of surfactant secretion, synthesis and recycling. Since the acute respiratory distress syndrome(ARDS) is usually viewed as the functional and morphological expression of a similar underlying lung injury casued by a variety of insults and since abnormalities in surfactant function have been described in ARDS, the authors investigated the different effects of endotoxin and thiourea on the accumulation of mRNA encoding SP-A. Methods : Sprague-Dawley rats were given 5 mg/kg intraperitoneal endotoxin from Salmonella enteritidis and 3.5 mg/kg intraperitoneal thiourea and sacrified at different time periods. Results : 1) SP-A mRNA was significantly increased 67.0% in 6 hours and 73.4% in 24 hours after 5 mg/kg endotoxin treatment respectively(P<0.005, P<0.005). 2) SP-A mRNA significantly decreased 32.9% in 24 hours after 3.5 mg/kg thiourea treatment(P<0.05). Conclusions : These results indicate that the differential regulation of surfactant protein A in vivo is evident and suggest that surfactant protein A might be differentially regulated during different kind of insults of lung injury at different time periods without altering lung wet to dry ratios.

• Journal of Aquaculture
• /
• v.18 no.2
• /
• pp.122-129
• /
• 2005

Ammonia is the major limiting factor in intensive aquaculture production systems. Therefore, quantification of ammonia excretion is important for the water quality management in aquaculture systems. Ammonia excretion is known to be affected by many factors such as body weight and dietary protein level (DPL). In this study, experiments were carried out to investigate the effects of body weight and DPLs on the rates of ammonia excretion of Nile tilapia Oreochromis niloticus. Three sizes of fishes (mean initial weight; 4.8 g,42.7 g and 176.8 g) were fed each of two dietary protein levels (30.5% and 35.5%). Daily feeding levels for the three fish sizes of 4.8 g, 42.7 g and 176.8 g were 6%, 3%, and 1.5% body weight per day, respectively. Each group of fish was stocked in a 17.1-L aquarium and all treatments were triplicated. Following feeding, the weight-specific ammonia excretion rate of O. niloticus increased, peaked at 4 to 8 h, and returned to pre-feeding levels within 24 h. Total ammonia nitrogen (TAN) excretion.ate per unit weight decreased with the increase of fish weight for each diet (P<0.05). The TAN excretion rate increased with increasing dietary protein content for each fish size (P<0.05). TAN excretion rates (Y) for each diet with different fish weights were described by the following equations: low DPL diet (30.5%): $Y\;(mg\;kg^{-1}\;d^{-1})=955.69-147.12\;lnX\;(r^2=0.95)$, high DPL diet (35.5%): $Y\;(mg\;kg^{-1}\;d^{-1})=1362.41-209.79\;lnX\;(r^2=0.99)$. Where: X=body weight (g wet wt.). The TAN excretion rates ranged 28.5%-37.1% of the total nitrogen ingested for the low DPL diet (30.5%) and 37.4-38.5% for the high DPL diet (35.5%). Total nitrogen losses of fish fed the high DPL diet $(35.5%;\;0.26\sim0.91g\;kg^{-1}\;d^{-1})$ were higher than those fed the low DPL diet $(30.5%;\;0.22\sim0.68g\;kg^{-1}\;d^{-1})$. The losses decreased per kg of fish as fish size increased. Results will provide valuable information fer water quality management and culture of Nile tilapia in recirculating aquaculture systems.