• 한국운동역학회지
• /
• 제15권3호
• /
• pp.31-49
• /
• 2005

The purpose of this study was to analyze the weight transfer patterns under the different golf swing types which are full swing control swing and putting stroke. Two women golfers participated in this study, one(165cm, 94.3kg)being classified as a low-handicap(LH)player, the other(165cm, 54.5kg) being classified as a high-handicap(HH) player. Both players are right-handed. Two force plates(Kistler, 9286AA) were synchronized with a motion capture system(Qualisys ProReflex MCU240). Anteriorposterior, mediolateral, and vertical forces were used as an indicator of the pattern of swing. Four discrete positions which are address, top of backswing impact, and finish were identified as an event and three phases which are backswing downswing, and follow-through between he events were also identified. The results showed that, at impact, the total force was 1.24BW ring the full swing 1.17BW during the control stroke, 1.00BW during the putting stroke. Depending on the golf swing types, the differences are existed. At impact, the distribution of forces is different with a low-handicap(LH) player and a high-handicap(HH) player. A LH player has 26% in right foot and 74% in left foot during the full swing 49% in right foot and 51% in left foot during the control swing 49% in right foot and 51% in left foot during the putting stroke. A HH, on the other hand, has 74% in right foot and 26% in left foot during the full swing 62% in right foot and 38% in left foot during the control swing 54% in right foot and 46% in left foot during the putting stroke. From address to top of backswing the amount of vertical forces are changed 43:57(right foot: left foot) to 76:24 during the full swing 47:53(right foot: left foot) to 75:25 during the control swing 50:50(right foot: left foot) to 54:46 during the putting stroke. The biggest weight transfer pattern took place in full swing and the control swing is next, and the putting stroke is the final.

• 한국운동역학회지
• /
• 제16권1호
• /
• pp.43-53
• /
• 2006

Among several movements that occurred upon a slope, golf swing is the most typical one because environmental conditions dynamically vary with many kinds of slopes. Some studies on the golf swing were performed about a weight transfer on flatland, however, there couldn't be seen any study about the weight transfer on slope elsewhere. Therefore, the purpose of this study was to provide quantified data to objectively test the coaching words and keys about the weight transfer at sidehill slope during goal impact EspeciaIly sidehill Slopes with ball above the feet. Four highschool golfer, who have average handy 5, were recruited for this study. Plantar pressure distribution and cinematographic data were collected during golf swing in the conditions of flatland, $5^{\circ}$, $10^{\circ}$ and $15^{\circ}$sidehill slope simultaneously. The two data were used to synchronize the two data later. The plantar regions under the foot were divided into 8 regions according to the directly applied pressure pattern of the subject to insole sensor. The 8 foot regions were hullux, medial forefoot, central forefoot, lateral forefoot, medial midfoot, lateral midfoot, medial heel, and lateral heel. And the plantar pressure data was also divided into four movement address, phases-backswing. downswing, and follow-through phases according to the percentage shown to the visual information of film data. Based on the investigations on public golf books and experiences of golfers, it was hypothesized by the authors in the early of this study that the steeper slopes are, the more weight loads on left foot that positions at the higher place. When observing the results of plantar pressure and vertical force curves according to the sidehill slope conditions, the hypothesis could be accepted.

• 한국자동차공학회논문집
• /
• 제15권2호
• /
• pp.87-94
• /
• 2007

It has been argued that the use of plastics can cause problems during design and manufacture owing to their low strength, relatively poor thermal conductivity and large thermal expansion. However, the advantages of plastics e.g., corrosion resistance, low cost, curtailment of weight, design flexibility etc., can compensate abundantly for the disadvantages. This study analyzes and compares the heat transfer performance characteristics of automotive compact oil cooler composed of plastic tube bundle with conventional metal oil cooler on the same core area basis as diameter, tube thickness, number of tube or tube arrangement varies. The performance analyses are accomplished by use of computational fluid dynamics program Fluent 6.2, which is verified and compared with the results of performance tests. The result of analyses is coincided with that of experiments. Flow pattern at air side according to tube arrangement is dominant factor which affects heat dissipation in case of similar total heat transfer surface area.

• Journal of Welding and Joining
• /
• 제21권1호
• /
• pp.48-53
• /
• 2003

The object of this study is to examine the effect of short circuit time ratio (SCTR) and current rise delay time (Td) on the spatter generation at low and medium current range in $CO_2$ welding. The spatter was evaluated by the weight generated in the welding of bead-on-plate for 30 seconds (3 times). Td was varied by order of 0, 0.4, 0.8 and 1.2 msec. At each Td, the short circuit time ratio was varied by the output voltage of the welding power source. In the low current range, it was found that the optimum SCTR was 20~25%, and the minimum spatter generation weight was obtained in the case of Td=0.4msec and SCTR=22% even though the remarkable difference was not showed by the application of Td. In the medium current range, it was confirmed that the arc was stable though the SCTR was increased from 20% to 40% by the control of current wave. Spatter generation weight depended on the variation of Td, and the lowest value of spatter generation weight occurred at Td=0.8~1.2msec.

• The Journal of Korean Physical Therapy
• /
• 제17권1호
• /
• pp.108-122
• /
• 2005

The gait training strategy in very important things for central nervous system(CNS) injury patients. There are many method and strategy for regaining of the gait who had CNS injury. A human being has central pattern generator(CPG) is spinal CPG for locomotion. It is a neural network which make the cyclical patterns and rhythmical activities for walking. Sensory input from loading and hip position is essential for CPG stimulation that makes the central neural rhythm and pattern generating structure. From sensory input, the proprioceptive information facilitate proximal muscles that controlled in voluntarily from cortical level and visual and / or acoustical information facilitate distal muscles that controlled voluntarily from subcortical level. Gait training method can classify that is functional level and structural level. Functional level includ level surface gait, going up and down the stair. It is important to facilitate a guide tempo in order to activate the central pattern generators. During the functional test or functional activities, can point out the poor period in gait that have to be facilitate in structural level. There are many access methods with patient position and potentiality. The methods are using of rhythmic initiation, replication and combination of isotonic with standing position. Clinically using it on weight transfer onto the stance leg, loading response, loading response and pre-swing, terminal stance, up and downwards stairs.

• Asian-Australasian Journal of Animal Sciences
• /
• 제18권10호
• /
• pp.1430-1434
• /
• 2005

We conducted two experiments to assess the effect of transfer from housing to grazing on stress hormone secretion in cattle using urine samples. In a preliminary experiment, urine samples were collected following an adrenocorticotrophic hormone (ACTH) challenge, and cortisol levels in urine were compared with the levels in plasma. In a second experiment, urinary cortisol was measured before and after the start of a grazing season in 6 Japanese Shorthorn cows, all of which had experienced grazing before. In experiment 1, urinary cortisol showed a pattern of changes similar to that of plasma with a 0.5-h temporal lag time, and the peak levels were 4 to 10 times higher than the basal levels. In experiment 2, the urinary cortisol levels in cows did not change after the cows were let out to pasture, with no decreases in body weight. This study suggests that the transfer from housing to grazing did not affect physiological responses to cause high excretion of urinary cortisol in grazing-experienced cattle using a non-invasive sampling method.

• 한국진공학회지
• /
• 제16권5호
• /
• pp.366-370
• /
• 2007

밀도가 높고 주기적으로 배열된 나노 크기의 기공이 25nm 두께의 실리콘 산화막 기판위에 형성 되었다. 나노미터 크기의 패턴을 형성시키기 위해서 자기조립물질을 사용했으며 폴리스티렌(PS) 바탕에 벌집형태로 평행하게 배열된 실린더 모양의 폴리메틸메타아크릴레이트(PMMA)의 구조를 형성하였다. 폴리메틸메타아크릴레이트를 아세트산으로 제거하여 폴리스티렌만 남아있는 나노크기의 마스크를 만들었다. 폴리스티렌으로 이루어진 나노패턴의 지름은 $8{\sim}30nm$ 였고 높이는 40nm였으며, 패턴과 패턴사이의 간격은 60nm였다. 형성된 패턴을 실리콘 산화막 위에 전사시키기 위해 불소 기반의 화학 반응성 식각을 사용하였다. 실리콘 산화막에 형성된 기공의 지름은 $9{\sim}33nm$였다. 실리콘 산화막을 불산으로 제거하여 실리콘에 형성된 기공을 관찰하였고, 실리콘기판에 형성된 기공의 지름은 $6{\sim}22nm$였다. 형성된 기공의 크기는 폴리메틸메타아크릴레이트의 분자량과 관계가 있음을 알 수 있었다.

• 한국수정란이식학회지
• /
• 제28권3호
• /
• pp.229-235
• /
• 2013

The objective of this study was to monitor health conditions of four genetically identical somatic cells cloned Labrador retriever puppies by estimation of body weight and analysis of hematologic and serologic characteristics. Naturally ovulated oocytes and donor cells were used for somatic cell nuclear transfer (SCNT). Donor cells and enucleated oocytes were followed by electric fusion, chemical activation and surgical embryo transfer into the oviducts of surrogate females. Two recipients became pregnant; two maintained pregnancy to term, and four live puppies were delivered by Caesarean section. The cloned Labrador retrievers were genetically identical to the nuclear donor dog. The body weight of clone-1, -2, -3, and -4 was increased from 0.66, 0.40, 0.39, and 0.37 kg at birth to 6.2, 6.6, 6.2, and 6.0 kg at 8 weeks of age, respectively. Although clone-4 had lower numbers of RBC than reference range, the most of RBC and WBC related heamatologic results of cloned puppies were not different when compared to reference range. In serological analysis, Glucose, ALP and inorganic phosphate level of four cloned puppies was significantly higher than the reference ranges. However, there was no significant difference among four cloned dogs. This study suggests that cloned puppies derived from SCNT did not have remarkable health problems, at least in the growth pattern and hematological and serological parameters.

• 한국운동역학회지
• /
• 제14권2호
• /
• pp.179-186
• /
• 2004

본 연구의 목적은 숙련된 골프선수들의 골프 스윙동작 시 상이한 무게중심 변환 형태가 존재하는지 그리고 만약 이 상이한 무게중심 변환 형태가 존재한다면 어떤 형태로 나타나는지를 알아보고자 하였다. 본 실험을 위해 13명의 남자 대학 엘리트 골프 선수들을 대상으로 드라이버를 이용한 스윙을 실시하게 하였다. 수직 지면 반력과 압력중심 이동 패턴을 측정하기 위해 지면반력기 2대와 스윙 동작 시 critical event 설정을 위해 1대의 고감도 비디오 카메라를 사용하였다. 또한 스윙 결과로 나타나는 비거리, 클럽헤드 속도를 측정하기 위해 스윙 분석기를 이용하였다. 피험자 간 상호 비교를 위해 측정된 수직 지면반력 성분은 몸무게를 이용하여 표준화하였고 압력중심은 어드레스시의 압력중심을 원점으로 재 계산하였다. 또한 임팩트 시 측정된 좌우 수직 지면반력 성분을 이용하여 두 가지의 상이한 스윙 스타일로 구분하였다. 연구결과 8명(62%)의 피험자에게서 좌측 수직력 성분이 상대적으로 높은 전족(FFS) 스타일임이 밝혀졌고 5명(38%)은 그 반대인 리버스(RFS) 스타일임이 밝혀졌다. 이 전족 스타일은 대부분의 골퍼들이 선호하고 또 그렇게 하여야만 한다고 믿고 있는 스윙방식이다. 이와 반대인 리버스 스타일은 코치들이 금기시 하는 스윙의 형태로서 초보자, 즉 비숙련 자에게만 나타나는 전형적인 스윙형태라고 인지되고 있다. 하지만 이 두 가지 스윙 스타일이 초보자가 아닌 숙련된 골프 선수들에게서도 실제 존재한다는 것이 본 실험 결과로 나타났다. 평균 압력중심 이동 패턴은 전후축 방향의 경우 RFS 스타일 그룹이 RFS 스타일 그룹에 비해 압력중심 이동이 크게 나타났고 좌우축의 경우에도 RFS 그룹이 FFS 그룹에 비해 압력중심 이동이 크게 나타났다. 특히 임팩트 시 압력중심의 위치가 FFS 그룹은 전족 근처에 있는 반면 RFS 그룹은 후족(rear foot)에 위치하여 두 스윙 스타일의 차이점을 분명하게 보여주었다. 따라서 비록 이 RFS 스타일이 대부분의 코칭 이론과는 상반되는 무게중심 이동 패턴을 보여주었지만 이 스윙 스타일이 잘못된 것이 아닌 실제 존재하는 하나의 스윙 스타일로 인식하여 스윙 지도 시 이에 알맞은 적절한 교습법을 마련해야 할 것이다.

• The Journal of Korean Physical Therapy
• /
• 제27권2호
• /
• pp.112-117
• /
• 2015

Purpose: The purpose of this study was to examine the effects of a task-specific obstacle crossing rehabilitation program on functional gait ability in patients with cerebellar ataxia. Overall, we sought to provide ataxia-specific locomotor rehabilitation guidelines for use in clinical practice based on quantitative evidence using relevant analysis of gait kinematics including valid clinical tests. Methods: Patients with cerebellar disease (n=13) participated in obstacle crossing training focusing on maintenance of dynamic balance and posture, stable transferring of body weight, and production of coordinated limb movements for 8 weeks, 2 times per week, 90 minutes per session. Throughout the training of body weight transfer, the instructions emphasized conscious perception and control of the center of body stability, trunk and limb alignment, and stepping kinematics during the practice of each walking phase. Results: According to the results, compared with pre-training data, foot clearance, pre-&post-obstacle distance, delay time, and total obstacle crossing time were increased after intervention. In addition, body COM measures indicated that body sway and movement variability, therefore posture stability during obstacle crossing, showed improvement after training. Based on these results, body sway was reduced and stepping pattern became more consistent during obstacle crossing gait after participation in patients with cerebellar ataxia. Conclusion: Findings of this study suggest that task-relevant obstacle crossing training may have a beneficial effect on recovery of functional gait ability in patients with cerebellar disease.