• Proceedings of the KIEE Conference
• /
• 1994.11a
• /
• pp.382-384
• /
• 1994

Wireless communication has become a hot issue for its simplicity. Using light wave instead of micro wave has many advantages. It is simple to design a circuit because we can make a circuit with discrete components such as photo diode, photo detector, OP Amp[2]. And we can have many communication channels for we can use every frequency domain. In this paper, we design the wireless communication system and analyze the pulse signal. Then using ray tracing technology we simulate the distribution of light beam.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.26 no.6_spc
• /
• pp.744-754
• /
• 2016

A large satellite communication terminal on the truck shall be designed ruggedly against a disturbance for holding a position which satisfies communication performance. Especially. A design considering a wind is essential for getting into a communication with a satellite in a strong-wind condition. This paper suggests a experimental method to analyze performance of a radio wave and the aiming accuracy by wind vibration. And it analyzes the improvement and vibrational effect on a random-excitation of a structure caused by nonlinear strong wind.

• Proceedings of the Korean Society of Marine Engineers Conference
• /
• 2005.06a
• /
• pp.448-453
• /
• 2005

For under-water communication system, due to limit of bandwidth and reflect of under-water wave, it is difficult to implement high-reliability high-speed digital communication system. To apply high-reliability and high-speed communication system for under-water system, the efficient combine the channel design with the use of multiple transmit and/or receive antennas. Therefore this paper analyze the space time coded system for under-water communication environment.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.16 no.4
• /
• pp.53-58
• /
• 2016

A ray tracing method to analyze the propagation channel characteristics for a millimeter-wave indoor wireless communication system is presented. Reflected rays from planar as well as rough surfaces are included. Transmitted rays though a thin dielectric slab are considered. Maps representing received power levels and RMS delay spread from a transmitter in a rectangular room are shown. The received power levels in the empty room for bottom's roughness factors of 0 and 0.13 are represented. The simulation results are well consistent with the calculation of Friis equation with reflection coefficient. Any size of furniture the shape of plane form can be positioned anywhere in the room.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.10 no.1
• /
• pp.60-66
• /
• 2011

Currently, ITS (Intelligent Transport System) system is supporting a variety of services to be enhanced traffic's efficiency and driver's safety as developing of information communications and network technology. High data transfer communications such as Wibro, HSPA and WAVE are used for providing ITS services, but there are some differences from specification and performance applied. So, users who are employing the communication systems to transfer data whatever they want to have been suffering from use. In this paper, it is proposed that user can use various high data transfer communication systems wherever environments they are in using adaptation of system change. Also, it is implemented performance of system which uses alternate communication scheme in mobile terminal based on embedded platform.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.17 no.1
• /
• pp.280-294
• /
• 2023

Unmanned aerial vehicles (UAVs) and millimeter-wave frequencies play key roles in supporting 5G wireless communication systems. They expand the field of wireless communication by increasing the data capacities of communication systems and supporting high data rates. However, short wavelengths, owing to the high millimeter-wave frequencies can cause problems, such as signal attenuation and path loss. To address these limitations, research on high directional beamforming technologies continue to garner interest. Furthermore, owing to the mobility of the UAVs, it is essential to track the beam angle accurately to obtain full beamforming gain. This study presents a beam tracking method based on the unscented Kalman filter using hybrid beamforming. The simulation results reveal that the proposed beam tracking scheme improves the overall performance in terms of the mean-squared error and spectral efficiency. In addition, by expanding analog beamforming to hybrid beamforming, the proposed algorithm can be used even in multi-user and multi-stream environments to increase data capacity, thereby increasing utilization in new-radio multiple-input multiple-output orthogonal frequency-division multiplexing systems.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.14 no.10
• /
• pp.2215-2222
• /
• 2010

A Wireless Access for Vehicular Environment (WAVE) system based on Orthogonal Frequency Division Multiplexing (OFDM) is made for vehicle to vehicle wireless communications. The physical layer standard of the WAVE system is very similar to that of the IEEE802.11a wireless local area network (WLAN). Therefore, the performance of the WAVE system is degraded by continual channel variation in the WAVE multipath fading channels after starting initial channel estimation. In this paper, we research the performance improvement of equalization in 64 Quadrature Amplitude Modulation (QAM) transmission in WAVE environment. The proposed algorithms use the training sequence and the midamble sequence which is used for fast channel variation such as WAVE environments. Additionally, various interpolation methods are also used for the channel tracking.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.25 no.1
• /
• pp.1-8
• /
• 2019

In December 2017, many collision accidents of small vessels, such as those between oil refineries and fishing boats, occurred near Yeonghung-do in Incheon. In order to prevent marine casualties from small vessels, the government is striving to improve the safety capabilities of ship operators by strengthening education and improving the working environment. They are providing education and refining training regulations for fishermen operating vessels under 5 tons. However, the situation includes certain vulnerabilities. In this study, we propose a collision prevention algorithm for small vessels using the Wireless Access in Vehicular Environments (WAVE) communication system, which is a new communication technique to prevent collisions with small ships. The collision avoidance algorithm used is based on DCPA/TCPA. Research analyses, simulation experiments and questionnaires have been conducted to define the criteria of DCPA/TCPA. As a result, the standard for DCPA was $8(L_a+L_b)$ and for TCPA was 2.5 min. Three different accident cases were selected, and this algorithm was applied to confirm alarm responses at certain times. This algorithm can provide information to the operators of small ships in advance to help them recognize potential collision situations.

• Information and Communications Magazine
• /
• v.19 no.9
• /
• pp.31-42
• /
• 2002

CRL (Communications Research Laboratory, Independent Administrative Institution, Japan) is developing ITS wireless communication technologies in millimeter-wave frequency region. Technologies are categorized for inter-vehicle communications (IVC) and road-vehicle communications (RVC). In this paper, system concepts and the experimental facilities are introduced. The experimental facility for inter-vehicle communications is gotten ready in 60 GHz frequency region and the experimental system for road-vehicle communications is based on RoF (Radio on Fiber) technology in 36-37GHz frequency region.

• Journal of the Institute of Convergence Signal Processing
• /
• v.12 no.3
• /
• pp.217-221
• /
• 2011

GaAs-based and InP-based HEMTs(High Electron Mobility Transistors) have good microwave and millimeter-wave frequency performance with lower minimum noise figure. GaAs-based MHEMTs(Metamorphic HEMTs) have some advantages, especially for cost, compared with InP-based ones. In this paper, the RF small-signal circuits of MHEMTs are simulated and analyzed for the design of millimeter-wave application systems. The simulation analysis for RF small-signal frequency can help and give some insights about the MHEMTs for the design of millimeter-wave application and communication systems.