• Textile Coloration and Finishing
• /
• v.1 no.1
• /
• pp.54-62
• /
• 1989

The woven fabric composed of nylon 6 filaments was treated with aqueous solutions (20, 30, 40, 50, 60%) of formic acid at 3$0^{\circ}C$ for 10 minutes under unrestrained condition, and the shrinkage behavior and some kinds of properties were examined. The shrinkages of the constituent yarns and fabric were increased with formic acid concentration, but they were lower than that of the original filaments because of fabric-structural factors. And the shrinkage of the warp was lower than that of the weft because of the residual stress from weaving process. By the restraint forces such as fabric-structural factors and residual stress, the constituent filaments were damaged partially at 60% of formic acid concentration and the degree of damage on the warp was greater than on the weft. And though the fabric count were increased overall, the spacing between the warps was decreased prior to the weft and eliminated nearly at 60% of formic acid concentration. The thickness, tensile strength, elongation, and handle value of fabric were increased overall with formic acid concentration excepting that the tensile strength for both the warp and weft directions and the elongation for the warp direction were decreased instead by the damage of yarns. But the crease recovery was decreased except the case of the weft direction at 60% of formic acid concentration.

• The Transactions of the Korea Information Processing Society
• /
• v.5 no.6
• /
• pp.1620-1632
• /
• 1998

This paper presents a fast parallel algorithm for volume rendering and its implementation using C language and MPI MasPar Programming Language) on the 4,096 processor MasPar MP-2 machine. This parallel algorithm is a parallelization hased on the Lacroute' s sequential shear - warp algorithm currently acknowledged to be the fastest sequential volume rendering algorithm. This algorithm reduces communication overheads by using the sheared space partition scheme and the load balancing technique using load estimates from the previous iteration, and the number of voxels to be processed by using the run-length encoded volume data structure.Actual performance is 3 to 4 frames/second on the human hrain scan dataset of $128\times128\times128$ voxels. Because of the scalability of this algorithm, performance of ]2-16 frames/sc.'cond is expected on the 16,384 processor MasPar MP-2 machine. It is expected that implementation on more current SIMD or MIMD architectures would provide 3O~60 frames/second on large volumes.

• The Journal of the Acoustical Society of Korea
• /
• v.23 no.8
• /
• pp.583-589
• /
• 2004

Proposed is a speaker normalization method based on vector quantizer for continuous speech recognition (CSR) system in which no acoustic information is made use of. The proposed method, which is an improvement of the previously reported speaker normalization scheme for a simple digit recognizer, builds up a canonical codebook by iteratively training the codebook while the size of codebook is increased after each iteration from a relatively small initial size. Once the codebook established, the warp factors of speakers are estimated by comparing exhaustively the warped versions of each speaker's utterance with the codebook. Two sets of phones are used to estimate the warp factors: one, a set of vowels only. and the other, a set composed of all the Phonemes. A Piecewise linear warping function which corresponds to the estimated warp factor is adopted to warp the power spectrum of the utterance. Then the warped feature vectors are extracted to be used to train and to test the speech recognizer. The effectiveness of the proposed method is investigated by a set of recognition experiments using the TIMIT corpus and HTK speech recognition tool kit. The experimental results showed comparable recognition rate improvement with the formant based warping method.

• Journal of the Korean Society of Costume
• /
• v.33
• /
• pp.217-228
• /
• 1997

The purpose of this study was to investigate influence of the construction method of the circular skirt on drapability and shape of static silhouette and length variation. In made 24 types of skirts giving the variations (six kinds of peach skin-like finished fabrics two types of cutting method two types of machine stitch method of hem), The results were as follows: 1. Analysis of drapability In the cutting method thre was similarity between warp direction and true bias direc-tion. In the machine stitch method of hem there was similarity between blind stitch and blind stitch machine. According to the fabrics analysis of drapability was excellent in the order N/P 80/20(fabric 1)>P 100(fabric 5)>P 100(fabric 6)>P 100 (fabric 2)>P 100 (fabric 4)>N/C 50/50(fabric 3). 2. Analysis of the characteristics values of static silhouette shape In the cutting method shape of static sil-houette became wide in the warp direction. In the machine stitch method of hem shape of static silhouette became wide in the blind stitch. According to the fabrics shape of static silhouette became most wide in the N/C 50/50(fabric 3) and shape of static sil-houette become most narrow in the P 100(fabric 2,5) 3. Analysis of the length variation In the cutting method the true bias direc-tion was longer than the warp direction. In the machine stitch method of hem there was simi-machine stitch method of hem there was simi-larity between blind stitch and blind stitch ma-chine. In fabrics the P 100(fabric 6) showed the longest the N/C 50/50(fabric 3) showed most slight. Interaction between the cutting and messure-ment part of skirt lengh. In the warp diretion parts that showed longest length variation were C. G, K, O in the true bias diretion parts that showed most slight length variation were A, E, M, I.

• Journal of the Korean Society of Costume
• /
• v.62 no.7
• /
• pp.41-53
• /
• 2012

Hwangnamdaechong Tomb (The 98th tomb in Hwangnam-dong), one of the royal tombs located around the area of royal tomb of King Michu in Hwangnam-dong, Gyeongju, is currently designated as Historic Site No. 40. It is assumed that Hwangnamdaechong Tomb is a royal tomb of the early 5th century. This study aims to examine the fabric relics excavated from Hwangdamdawchong Tomb and currently housed in Gyeongju National Research Institute of Cultural Heritage. The types of fabrics excavated from Hwangdamdawchong Tomb include plain silk, warp-faced compound woven silk, and hemp cloth. Most of these fabrics are adhered to metal products that became rusty. Plain silk found in Hwangnamdaechong Tomb can be divided into four types by its weaving method. Geum excavated from Hwangnamdaechong Tomb is typical Gyeong Geum that uses colored warp for its base and pattern. It is plain Gyeong Geum that the binding weft and warp is plain woven. Although there are a lot of Gyeong Geum fabrics whose colors are hard to define due to yellowing after long years, there are still many fabrics whose color such as purple, red, blue, and green can be identified. As literatures have shown that p cloth as well as silk were frequently woven during Silla dynasty, tremendous amount of hemp cloth was excavated. Most of the hemp cloth has S-twist in the warp and 8-12 seung degree of delicacy.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.13 no.2
• /
• pp.21-26
• /
• 1977

The author operated with a six seam trawl net by the stern trawler, No. 85 Parto, 499 GT, 2,200ps, in the Atlantic coast of Africa, from June, 1975 to October, 1977. In the term, towing speed and warp tension were determined, and trawling condition was observed. 1. The condition of trawling was good when the tension was less than 7.5ton. 2. 290 RPM, $13.5^{\circ}\;to\;13.8^{\circ}$ of pitch angle, and 3.5 to 4 knots of towing speed was considered as optimum for the trawler in the relation to the engine condition.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.45 no.3
• /
• pp.453-463
• /
• 2021

The lengthwise and widthwise deformation of warp-knitted fabrics with different sizes and loading modes were evaluated. Moreover, five tricot samples cut in three directions were compared under four test conditions (A-D). In tests A and B, 500 and 250 g loads were applied on a layer of 20 × 20 and 5 × 10 cm² samples, respectively. In test C, a 20 × 20 cm² sample was folded in half over a rod, and 500 g load was applied to each half. In test D, a 20 × 20 cm² sample was sewn in a loop and subjected to a 500 g load. The lengthwise extension and widthwise contraction analysis results indicate that test B affords the largest values. However, analysis results of the warp-knitted fabric normalized through conversion to a 1 g load and 1 cm sample width indicate that the largest values are afforded for test D. Therefore, pattern reduction may vary depending on the measurement method and properties of the knitted fabric used for the compression wear production, causing variations in the finished product. Thus, an appropriate measurement method must be adopted based on the compression wear design and knitted fabric to be used.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.39 no.1
• /
• pp.33-43
• /
• 2003

The midwater pair trawl which is being used at present in Korea have several problems. Firstly, it is difficult to control the net height on high towing speed. Secondly, net breaking often occurs owing to floats and thirdly, the volume of net on the net drum is so large. This study is aiming for examining the possibility of application for the Korean midwater pair trawl through the model experiment of non-float midwater pair trawl. The model of non-float midwater pair trawl was manufactured as 1/100 of the full scale net which is being used in bottom pair trawl for 850ps class considering the Tauti's Similarity law. The model experiment was carried out to analyze the opening efficiency according to the variation of lower warp length and the opening efficiency was investigated between th proto type and non-float type. The results obtained can be summarized as follows ; 1. The hydrodynamic resistance of non-float type was about 10~20% smaller than that of the proto type and it increased about 1ton according to the increase of dL at the condition of the same flow speed. The resistance acting on the lower warp decreased about 5% but that of the upper warp increased according to the increase of lower warp length (dL) at the condition of the same flow speed. 2. The net height of the non-float type decreased almost linearly according as the increased of flow speed and it increased in a logarithmic functional form with the increase of the lower warp length at the condition of the same flow speed. On the decreasing rate of the net height, the non-float type was lower than the proto type and the difference of the decreasing rate was about 12% at 3.0 knot, 25% at 4.0 knot, 25% at 4.0 knot respectively when dL was 30m. 3. The net width of non-float type was not varied so much as only 2m range and was larger than that of proto type. 4. The mouth area of non-float type decreased in a exponential functional form. On the decreasing rate of the mouth area, the non-float type was lower than the proto type. The filtering volume increased in a logarithmic functional form with increasing flow speed and the filtering volume of proto type decreased steeply over 3.0knot, but that of non-float type increased until 4.0knot. 5. The optimal length of lower warp was when the value of dL was about 30m and the optimal position of front weight was at the connection point of four net pendants.

• Fashion & Textile Research Journal
• /
• v.1 no.4
• /
• pp.387-392
• /
• 1999

The effects of the ratio of warp diameter to filling diameter (${\beta}$-ratio) and warp thread crash on the crimp factor and the yarn curvature were studied theoretically in this paper. The models of 2/2 twill fabric derived square cloth and sinusoidal curved cloth were used for the theoretical analysis. The crimp factors (C) for the models were given theoretically as follows; (1) Derived square cloth(general equation for b) $$C=\frac{(1+{\beta})({\theta}-sin{\theta})}{(1+{\beta})sin{\theta}+{\alpha}}$$ (2) Sihusoidal curved cloth $$C=\frac{(1+{\beta})sin{\theta}\[1+\{\frac{{\pi}(1-cos{\theta})}{4sin{\theta}}\}^2\]+{\alpha}}{(1+{\beta})sin{\theta}+{\alpha}}-1$$ The curvatures(${\kappa}$) for the models were given theoretically as follows; (1) Derived square cloth $${\kappa}=\frac{2}{d_w+d_f}$$ (2) Sinusoidal curved cloth $${\kappa}=\|{^{\;\;\prime\prime} \atop r}(s)\| \\ where \;s=\frac{p^'}{{\pi}}\(u+\frac{k^2u}{4}+\frac{k^2}{8}sin2u\)$$.

• The Research Journal of the Costume Culture
• /
• v.14 no.2
• /
• pp.286-298
• /
• 2006

The purpose of this study is to find the proper width of fabric which can bring high efficiency on productivity. We focus on the marking method by comparing and analyzing the marking efficiency of flare skirt. This study employs 4 criteria to mark the flare skirt, which are angle, location, width, and direction, respectively. There can be 3 different angles$(180^{\circ},\;270^{\circ},\;360^{\circ})$, and 2 different locations(the center line and the middle of the pattern) according to fixing of the warp line of the fabric. Also, width can be classified into 2 groups(110cm, 150cm), and marking direction can be grouped into 2(one direction marker and one direction per each size marker). These 4 criteria make $24(3{\times}2{\times}2{\times}2)$ cases for this study. Main findings are follows. Fist, the skirt with the 150cm width has higher efficiency rate than that of 110cm. Second, fixing the warp line at the center line has higher efficiency rate than that in the middle. Finally, per size marker has much higher efficiency than the just direction marker. In sum, we find that 150cm width with the center warp line and per size marker brings the highest efficiency rate.