• Journal of the Semiconductor & Display Technology
• /
• v.17 no.4
• /
• pp.86-90
• /
• 2018

Standards related to express the non-flatness of a wafer are reviewed and discussed, for example, bow, warp, and sori. Novel wafer warpage measurement method is proposed for 3D stacked IC application. The new way measures heat transfer from a heater to a wafer, which is a function of the contact area between these two surfaces and in turn, this contact area depends on the wafer warpage. Measurement options such as heating from room temperature and cooling from high temperature were experimentally examined. The heating method was found to be sensitive to environmental conditions. The cooling technique showed more robust and repeatable results and the further investigation for the optimal cooling condition is underway.

• Korean Journal of Heritage: History & Science
• /
• v.34
• /
• pp.80-101
• /
• 2001

This article is concentrated on the organization for labor exchange in producing hemp cloth at Geumso-ri, Imha-myoun, Andong city. The organization is called "Sam-dool-ge", and it is different from the organization for labor exchange in producing rice because it is managed by women mostly. ln harvesting hemp, same amount of labor and expenses are invested. Especially, labor is supplied in equal condition. In spinning hemp cloth, the work is shared on the basis of same tech level. In threading the warp and fastening hemp cloth. the work conducted collaborately under the best engineer's direction. "Sam-dool-ge", a gil-sam labor exchange, also presents cultural creativity which produces and inherits the folkloric tradition, and also has the quality as a rite of passage. Nowadays, producing hem cloth is for pursuiting of profits than for making clothes as it used to be. This tradition will be lasted at least for a while because some young generations are beginning to participate in and old generation is teaching them good.

• The Journal of Asian Finance, Economics and Business
• /
• v.8 no.3
• /
• pp.451-458
• /
• 2021

The objective of this research is to analyze the effect of bad credit and liquidity on bank performance with the mediation of capital adequacy. Data were provided by banking institutions listed on the Indonesia Stock Exchange from the period of 2011-2019. The analysis technique was PLS-SEM supported by an application named WarpPLS 6.0. The results of the research show that the effect of bad credit and liquidity on bank performance is not significant. A high level of bad credit is associated with a low level of bank performance. Bank earnings decline along with low profitability. This relationship is not significant because banks can still cover some proportions of bad credit through capital availability. Capital adequacy as an intervening variable has mediated partially the effect of bad credit and liquidity on bank performance. Besides, capital adequacy has a strong effect on credit distribution. Agency theory says that the owner of the fund (the savers of saving account, current account, deposit account) is called principal while the bank as the trusted institution to manage the fund is called an agent. If customers fulfill their duty, then bad credit never happens.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2013.11a
• /
• pp.1418-1420
• /
• 2013

GPU는 범용 CPU와는 달리 수백 개의 코어로 이루어져 병렬처리에 특화된 형태로 발전되어 왔으며, 이미지 및 동영상 처리, 유체 역학 시뮬레이션, 의료, 지진 분석 등 점차 많은 영역에서 사용 되고 있다. 최근에는 GPU를 이용하여 볼륨 렌더링을 가속화하는 많은 기법들이 연구되고 있다. 본 논문에서는 볼륨 렌더링을 가속화하기 위한 GPU 기반의 쉐아-스큐 워프 기법을 제안한다. 여기서는 GPU를 이용하여 효율적인 메모리 사용, 코어의 활성화, 뱅크 충돌 감소 기법을 이용하여 기존의 CPU 기반 볼륨 렌더링 기법과 비교하여 빠른 시간에 동일한 결과물을 생성한다.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2011.11a
• /
• pp.369-372
• /
• 2011

양 방향성 필터는 이미지표면 평탄화와 잡음제거에 좋은 성능을 보이지만 특유의 연산 복잡도로 인하여 연산 시간이 오래 걸린다는 단점이 존재한다. 따라서 본 논문에서는 고도의 병렬수행을 바탕으로 하는 그래픽연산장치(GPU)에 적합하도록 수정된 효율적인 양 방향성 필터를 NVIDIA 의 CUDA 를 사용하여 GTX 285 GPU 에서 구현하였다. 영상의 전 영역을 참조하는 대신 인접하고 연속된 영역으로의 근사화, 적은 메모리 사용량, 빠른 접근속도를 가지며 충돌이 최소화된 공유메모리 버퍼, Warp 를 고려한 병합된 메모리 접근방법을 바탕으로 병렬화 하였다. 그 결과, 같은 방식의 순차실행 알고리즘 대비 최소 약 34 배에서 최대 약 76 배의 속도 개선과 30dB 내외의 PSNR 을 갖는 양 방향성 필터를 구현할 수 있었다.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.40 no.9
• /
• pp.597-604
• /
• 2016

A parallel algorithm of bi-conjugate gradient method was developed based on CUDA for parallel computation of the incompressible Navier-Stokes equations. The governing equations were discretized using splitting P2P1 finite element method. Asymmetric stenotic flow problem was solved to validate the proposed algorithm, and then the parallel performance of the GPU was examined by measuring the elapsed times. Further, the GPU performance for sparse matrix-vector multiplication was also investigated with a matrix of fluid-structure interaction problem. A kernel was generated to simultaneously compute the inner product of each row of sparse matrix and a vector. In addition, the kernel was optimized to improve the performance by using both parallel reduction and memory coalescing. In the kernel construction, the effect of warp on the parallel performance of the present CUDA was also examined. The present GPU computation was more than 7 times faster than the single CPU by double precision.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.31 no.1
• /
• pp.45-53
• /
• 1995

Working depth of the model net was determined by using of the same experimental tank and the same model net that used in the forwarded report in a series studies. The depth of the net which indicates the depth of the head rope from the water surface, was determined by the photographs taken in front of the net mouth with the combination of towing velocity, warp length and distance between paired boats. The results obtained can be summarized as follows: 1. Working depth of model nets A and B was varied in the range of 0.09~1.66$m$,and 0.04~1.34$m$(which can be converted into 2.7~40.2$m$and 1.2~49.8$m$in the full-scale net) respectively, and the depth of model net A was slightly deeper than the depth of the model net B. 2. Working depth ($D$,which is appendixed m for the model net, f for the full-scale net, A and B for the types of the model nets) can be expressed as the function of towing velocity$V_t$, as in the model net($V_t$=$m$/$sec$) $D_{mA}$=(-1.99+0.65$L_w$) $e^{-1.72V_t}$ $D_{mA]$=(-1.91+1.04 $L_w$) $e^{2.88V_t}$ in the full-scale net($V_t$=$k$'$t$ $D_{fA}$=(-29.32+0.65$L_w$)$e^{0.40 V_t}$ $D_{fB}$=(-57.60+1.04$L_w$)$e^{-0.67 V_t}$ 3. Working depth 9$D$ appendixes are as same as the former) can be expressed as the function of warp length$L_w$) in the model net, and can be converted into full-scale net as in the model net ($V_t$=$m$/$sec$) $D_{mA}$=-0.99 $e^{-1.42V_t}$+0.67$e^{-1359V_t}$$L_w$ $D_{mB}$=-.258$e^{-3.77V_t}$+1.16$e^{-3.15V_t$ $L^w$, in the full-scale net($V_t$=k't) $D_{fA}$=-29.28$e^{-0.32V_t}$+0.67$e^{-0.37V_t$$L_w$ $D_{fB}$=-69.10$e^{-0.81V_t}$+1.16$e^{-0.72V_t}$$L_w$. 4. Working depth was gradually shallowed according to the increase of the distance between paired boats.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.23 no.1
• /
• pp.1-5
• /
• 1987

The authors carried out an experiment to determine the vertical opening of the midwater trawl, which is the same used in the former experiment in this series of studies. To determine the vertical opening of otter board and front weight, three fish finders were used. A 200 KHz fish finder set on board the research vessel was used to sound the depth of water. A transmitter of 50 KHz fish finder was set through the shoe plate of otter board to determine the height of otter board from the sea bed, and a transmitter of another 50 KHz fish finder was set downwardly on the net pendant right before the front weight to determine the height of weight from the sea bed. The depth of otter board and weight were calculated by subtract the height of those from the depth of water, respectively. To determine the vertical opening of mouth, a transmitter of net recorder was set on the head rope and the vertical opening of that to ground rope was directly read on the recording paper. The results obtained can be summarized as follows: 1. The rate of the depth of otter board to the length of warp was in the range of 0.44 to 0.25, and the depth was linearly shoaled about 5m per 0.1m/sec of the towing speed or per 20rpm of the main engine. The rate of the observed depth to the calculated depth of otter board was in the range of 0.92 to 0.080 with a decreasing tendancy in accordance with the increase of towing speed. 2. The depth of head rope was 2 to 3m deeper than that of otter board, and the vertical opening of net mouth was in the range of 22 to 19m, with a decreasing tendancy in accordance with the increase of towing speed, 3. The difference of depth between front weight and otter board was about 20m and 22m respectively in the length of warp 100m and 150m without distinct change in accordance with the towing speed. The depth of front weight was 2 to 3m shallower than that of ground rope. 4. The changing range of depth of head rope according to the revolution of main engine was about 4m per 20rpm.

• Management & Information Systems Review
• /
• v.36 no.4
• /
• pp.129-148
• /
• 2017

Conventional exhibition management information systems recommend tourist attractions that are close to the place in which an exhibition is held. Some recommended attractions by the location-based recommendation could be meaningless when nothing is related to the exhibition's topic. Our goal is to recommend attractions that are related to the content presented in the exhibition, which can be coined as content-based recommendation. Even though human exhibition curators can do this, the quality is limited to their manual task and knowledge. We propose an automatic way of discovering attractions relevant to an exhibition of interests. Language resources are incorporated to discover attractions that are more meaningful. Because a typical single machine is unable to deal with such large-scale language resources efficiently, we implemented the algorithm on top of Apache Spark, which is a well-known distributed computing framework. As a user interface prototype, a web-based system is implemented that provides users with a list of relevant attractions when users are browsing exhibition information, available at http://bike.snu.ac.kr/WARP. We carried out a case study based on Korean Tourism Organization Linked Open Data with Korean Wikipedia as a language resource. Experimental results are demonstrated to show the efficiency and effectiveness of the proposed system. The effectiveness was evaluated against well-known exhibitions. It is expected that the proposed approach will contribute to the development of both exhibition and tourist industries by motivating exhibition visitors to become active tourists.

• Journal of the Korean Society of Costume
• /
• v.62 no.4
• /
• pp.107-122
• /
• 2012

The purpose of this study is to investigate the changes and developments that occurred as a result of the exchanges of gyeong-geum(經錦), a warp-faced compound weave of East Asia, and wie-geum(緯錦), a weft-faced compound weave of West Asia. In order to maximize the efficiency of this research, topics were narrowed down to the weaving skills and patterns, and the period was limited to the Tang dynasty. The systematic characteristics and differences of gyeong-geum and wie-geum were compared and contrasted through different works of literature. Then the excavated remains of geum-textiles were analyzed and the characteristics of the geum-textiles were defined in chronological order. The origin of wie-geum is traced back to the time when West Asia started to imitate the weaving style of the East Asian gyeong-geum. When combined with the weaving skills of the West Asian, gyeong-geum, which broke through the West and developed into the weft-faced compound twill silk, or samite. The exchange of geum-textiles took place as the techniques of gastric filament woven geum-textiles returned to the East. Along with the pearl roundel motifs of Sassanian Persia, mythical animals and western motifs of hunter patterns were used for the patterns of wie-geumin during the early Tang dynasty. This tendency is related to pa-sa-geum(波斯錦), ho-geum(胡錦), beon-geum(番錦) according to the recorded literature. The 8th and 9th century are periods when the West Asian Persian style was abandoned and the East Asian style, samite, was established. Not only did S twist silk threads replace Z twists, but also the repetition of patterns unfolded along with the weft and the warp. As this tendency was strengthened after the 9th century, the expression of patterns became more vividly colorful and showed both elements of naturalism and realism. The characteristics of the Bosangwha(寶相花) pattern in the Tang period were established with the rampantly repeated rosettes with birds often holding auspicious branches, that fly amid floral compositions.