• Journal of the Korean Society of Clothing and Textiles
• /
• v.28 no.3_4
• /
• pp.396-402
• /
• 2004

The purpose of this study was to investigate the difference of cotton fabric texture perceived between on-line(screening fabric) and off-line(real fabric), and to analyze fabric characteristics having an effect on the difference. The similarity of 55 various cotton fabrics perceived between on-line and on-line were measured showing simultaneously real fabrics and screening fabrics by 7-scale questionnaire. And the characteristics of cotton fabrics such as weave structure, thickness, weight, fabric density, stiffness, Hunter's L, a, b, and hue were measured. Cotton fabrics were classified into 3 groups by extent of similarity. There were no significant differences in weft density, stiffness, Hunter's L, a, b, and hue among 3 groups. But there were significant differences in weave structure, thickness, weight, warp density, and difference of warp ＆ weft density. The fabrics having large similarity were thick and heavy, had small warp density and difference of warp ＆ weft density, and distinct surface texture. The group having medium similarity included fabrics of medium thickness and weight, having weak surface texture, large warp density and difference of warp ＆ weft density. The group having small similarity, which the differences between on-line and off-line were large, included thin and light fabrics having smooth surface and large warp density and difference of warp ＆ weft density.

• ETRI Journal
• /
• v.39 no.4
• /
• pp.493-501
• /
• 2017

This paper introduces a new motion-synthesis technique for animating multiple characters. At a high level, we introduce a hub-sub-control-point scheme that automatically generates many different spline curves from a user scribble. Then, each spline curve becomes a trajectory along which a 3D character moves. Based on the given curves, our algorithm synthesizes motions using a cyclic motion. In this process, space-time warp curves, which are time-warp curves, are embedded in the 3D environment to control the speed of the motions. Since the space-time warp curve represents a trajectory over the time domain, it enables us to verify whether the trajectory causes any collisions between characters by simply checking whether two space-time warp curves intersect. In addition, it is possible to edit space-time warp curves at run time to change the speed of the characters. We use several experiments to demonstrate that the proposed algorithm can efficiently synthesize a group of character motions. Our method creates collision-avoiding trajectories ten times faster than those created manually.

• Journal of the Korea Society for Simulation
• /
• v.5 no.1
• /
• pp.81-90
• /
• 1996

In this paper, we propose a new events ordering mechanism for the optimistic distributed simulation of DEVS models. To simulate DEVS models in a distributed environment, a synchronization protocol is required for correct simulation. Time Warp is the most well-known optimistic synchronization protocol for distributed simulation. However, employing the Time Warp protocol in distributed simulation of DEVS models incurs events ordering problem due to the semantic difference between Time Warp and DEVS, Thus, to resolve such semantic difference, we devise the time-and-priority-stamp and $\varepsilon$ -delay schemes. The proposed schemes can order simultaneous events correctly in Time Warp-based distributed simulation of DEVS models.Time Warp and DEVS, Thus, to resolve such semantic difference, we devise the time-and-priority-stamp and $\varepsilon$ -delay schemes. The proposed schemes can order simultaneous events correctly in Time Warp-based distributed simulation of DEVS models.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.12 no.3
• /
• pp.43-55
• /
• 2010

The major advantages to use CAD System are that it reduce time and effort to manufacture products, and also can demonstrate the condition of the final product prior to the actual manufacturing process of the selected design using the simulation programs in CAD system. Specially in weave design, for use as Computer-Aided Weaving system, the complicated Dobby weave can figured out easily through calculating the complex weave plans of multi shafts. As to one of dobby weave structures, Supplementary warp is the warp threads which are in addition to the regular warps of the woven fabrics, and used for decorating the band or expressing some patterns. The purpose of this study is to research the weave design of Supplementary warp using Computer-Aided Weaving system, which is dobby weave design program of Weave Point. For performing this design study, it was researched the classified woven fabrics depending upon weaving processing, Computer-Aided Weaving system, and the characteristic of Supplementary warp fabrics. On the basis of the theoretical research, Supplementary warp was worked for the 24-shafts AVL computer dobby loom that applied to the various patterned images. The design work was done by Weave Point program of dobby weave, and simulated to fabrics before woven into the computer dobby loom. To see the visual images of fashion items, these simulated bobby fabrics were processed by three-dimension modeling through YoungWoo CNI CAD system. All the patterns of the Supplementary warp in this study could be applied for decorating the fashion clothing and accessories.

• Journal of Fashion Business
• /
• v.11 no.1
• /
• pp.15-25
• /
• 2007

As a part of the study for the materials development of compound feelings, therefore, this study investigated into the effects of the colors of warp and weft on the overall colors of fabrics, along with the visual changes of colors by the measuring angle of both warp and weft, by means of cross-dyeing of cotton/PET union fabrics. First, the dyeing of cotton and PET fabrics individually with the same color, the dyeing of PET fabrics followed by that of cotton fabrics resulted in a small difference in color than the dyeing in the reversed order. Second, in the case of the dyeing of cotton/PET union fabrics with the color of one fiber fixed and that of the other in ten colors, the color of cotton fiber, which is warp, gave much influence. In addition, the color change was remarkable among complementary colors, while it was negligible among adjacent colors. Third, in the case of dyeing of cotton/PET union fabrics with the color of one fiber fixed and that of the other in ten colors, the results were different by the measuring angle. When PET was fixed in green and cotton was dyed in ten colors, color-deepening was observed by the inclination in the direction of warp and weft without the dominance over all colors like cotton. When cotton was dyed in red and PET in ten colors, the color of PET appeared dimly in the horizontal case by the direction of the light, and red appeared as inclined in the direction of warp and weft. This is because of the dominance of cotton color over the overall color, since the density of cotton fiber, the warp of union fabrics, is higher than that of PET, the weft. Thus, this is to be considered in the selection of the warp's color. In view of the above results, the color changes are outstanding when the color of warp dominates the overall color and when the colors of warp and weft are complementary, in comparison with the case when the colors are adjacent. The colors also change by the measuring angle.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.38 no.1 s.113
• /
• pp.54-61
• /
• 2006

Basically corrugated board is composed of three layers of different basis weight and stock composition. Warp is well-known for one of the most important problems of corrugated board production. Warp is caused by difference of hygro-expansibility of linears between top and bottom. This research was performed to evaluate the effect of paper properties on the warp of corrugated board. To evaluate warp, dynamic expansion properties of paper was tested using DPM(dynamic penetration measuring system). The effects of sizing, stock composition and wet-pressing on dynamic expansion properties were also evaluated. Commercial base papers showed different dynamic expansion property depending on stock composition and papermaking operation. Sizing treatment decreased and wet-pressing increased the amount of dynamic expansion. To reduce warp of corrugated board, management of dynamic expansion of base papers should be controlled by manipulating moisture, heat and tension, using a variety of adjustments available on the corrugator.

• Fibers and Polymers
• /
• v.4 no.4
• /
• pp.176-181
• /
• 2003

Theoretical weavability limit relationships of fabrics from regular warp yarns and fancy filling yams with thickness variation in shuttleless weaving are reviewed. The relationships correlate maximum warp and filling cover factors, warp and filling yarn characteristics, the distribution of thick and thin places of filling yarn over the fabric surface, and the warp and filling weave factor. The research considers single filling feeder and multiple feeders cases. Additionally, comparisons between the weavability limit of regular yarns and fancy yams in shuttle and shuttleless weaving are given.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.22 no.4
• /
• pp.49-55
• /
• 1986

The authors carried out an experiment to determine the horizontal opening of the mid water trawl gear, which is the same as was used in the foreward experiment concerned to the attitude and opening efficiency of otter board. The trawl net .used in the experiment was designed to have a square sectional four-seamed body with two three-sepenlted wings. Each wing tip was rigged with a net pendant of 70 m long and the fore ends of the pendants were directly jointed to the otter pendant without inserting hand rope, and a front weight of 200 kg weigh was rigged with in front of the lowest wing tip. To determine the opening between otter boards ani between wing tips, two 50 KHz fish finders were set sideways on the otter board and on the port middle wing tip so as to detect the distance froa the finders to the starboard otter board and to the wing tip respectively, and the informations were transmitted to the indicators onboard the ship through water-tight cables. The results obtained can be summarized as follows: 1. The openings between otter borads were 43-45 m in case of the warp 100 m, 53-55 m in the war;> 150 m and 54-59 m in the warp 200 m. It was increased in linear according to the increase of towin; speed in the range of 1. 1-1. 8 mlscc. 2. The determined values of the openings between otter boards were greater than the estimated values. which were calculated by the opening between warps at the gallows of the ship and the length of tt~ warp, assuming that the warps from the top rollers to the otter boards were straight. The rates of the determined values to the estimated values were 1. 23-11. 0 in case of the warp 100 m, 1. 23-1. 12 in the warp 150 m and 1. 23-1. 15 in the warp 200 m respectively. The rates were almost the same at the slow towing speed of 1. 3 mlscc or so, then the higher the speed, the less the rate, and the longer the warp, the greater the rate. 3. The rates of the openings between otter boards to the total length of net pendant and the net (excluded cod end) showed 43-43% in case of the warp 150-200 m. It was a little smaller than th~ standard. which is 50%. in the common bottom trawl. 4. The determined openings between wing tips were 18-19 m in case of the warp 100m, 21-22 m in the warp 150 rn, They showed that the higher the speed, the greater the openings even though its range was no more than 1 m or so. 5. The rates of openings between otter boards to th~ openings betwee:l wing tips were almost invariably 38%. 6. The rates of openigs b2tween otter boards to the lenth of h~ad rope were 60-65% in cas': of th~ warp lOa-150m. It were much larg2r than th~ standard. which is 50%. in the common botto:n trawl.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.15 no.3
• /
• pp.33-40
• /
• 2013

This paper focused on investigating the seam strength by cutting direction depending on the fabrics and weave by comparing the tensile strength and elongation of bias, warp and weft of 4 kinds of find cotton fabrics and combining 6 kinds of seam cutting directions. The cutting directions are selected the warp direction, weft direction and 45-degree bias direction. Then, three kinds of directions, the warp/warp direction, the weft/weft direction and the bias/bias directions, and the three different kinds of directions, the warp/weft direction, the warp/bias direction and the weft/bias directions, were finally selected. The results are as follows: The tensile strength of all fabrics was higher in the order of warp, bias and weft direction and tensile elongation was higher in the order of bias, warp and weft direction in almost all fabrics. 100's and 150's cotton fabrics showed the highest seam strength when they were cut in the bias/bias direction. The seam strength of the fabrics cut in the same direction was the highest in the fabrics cut in the bias/bias direction. Four kinds of fabrics demonstrated the similar seam strength. However, for the seam strength of fabrics cut in the different directions, 100's cotton fabrics had the difference of seam strength by direction and weave, but 150's cotton fabrics didn't have any difference in seam strength by direction and weave. As described above, the seam strength was influenced by the cutting direction of fabrics. Accordingly, the seam strength can be improved by changing the cutting direction of seam when making the clothing.

• Journal of Digital Contents Society
• /
• v.18 no.6
• /
• pp.1151-1156
• /
• 2017

It is common to achieve lower performance in traversing tree data structures in GPU than one expects. In this paper, we analyze the reason of lower-than-expected performance in GPU tree traversal and present that the warp divergences is caused by the branch instructions ("if${\ldots}$ else") which appear commonly in tree traversal CUDA codes. Also, we compare the parallel shifted sort algorithm which can reduce the number of warp divergences with a kd-tree CUDA implementation to show that the shifted sort algorithm can work faster than the kd-tree CUDA implementation thanks to less warp divergences. As the analysis result, the shifted sort algorithm worked about 16-fold faster than the kd-tree CUDA implementation for $2^{23}$ query points and $2^{23}$ data points in $R^3$ space. The performance gaps tend to increase in proportion to the number of query points and data points.