• Advances in pediatric surgery
• /
• v.2 no.2
• /
• pp.119-128
• /
• 1996

The survey on branchial anomalies was conducted by Korean Association of Pediatric Surgeons. A total of 173 cases were reported, which were managed by 36 members and cooperators during the three years from January 1, 1993 through December 31, 1995. The following results were obtained by retrospective analysis of the 173 cases of branchial anomalies. The presenting symptoms were cervical mass in 101 cases, pit with or without discharge in 71, cervical abscess in 47 and respiratory difficulty in 3. The average age of the patients with cervical abscess was 52 months. Seventy(79%) of 89 patients with branchial anomalies and a cystic mass had their first clinical manifestations by 1 year of age, while 40(51%) of 78 patients with only a branchial cyst had their first clinical manifestation in first year of life. Radiologic studies were carried out in 77 patients (43%). The preferred diagnostic modalities were ultrasonography(47 patients), simple neck radiogram(19) and CT scan(17). Preoperative diagnosis was correctly made in 156(91%) of 173 patients. Seventeen patients were incorrectly diagnosed as thyroglossal duct cyst in 5 patients, cystic hygroma in 4, dermoid cyst in 3, and lymphadenopathy in 3. There were no remarkable difference in sex and laterality of presentation but bilateral lesions were found in 9(5%) patients and unusual locations of the anomalies were the manubrium, left subclavicular area, median cervial area, preauricular and parotid area. There were 78(45%) patients with cyst, 52(30%) patients with sinus, 35(20%) patients with fistula and 8(5%) patient with skin tag. Embryological classification was possible in only 64(37%) patients. The 2nd branchial anomaly was present in 50(78%), the 1st branchial anomaly in 10(18%), and the 3rd or 4th branchial anomaly in 4(6%). Histopathological study of the lining epithelium(N=134) is recorded that 45% were lined with squamous epithelium, 17% with respiratory epithelium, 6% with. squamous and respiratory epithelium, 14% with inflammatory change. Lymphoid tissue was common(62%) in the wall of the lesions. Twelve(7%) of 158 patients had postoperative complications including wound complication, recurrence and facial nerve palsy.

• Journal of computational fluids engineering
• /
• v.21 no.2
• /
• pp.99-105
• /
• 2016

The present study has been carried out to analyze the flow characteristics with geometric shape and control conditions in subsea by-pass valve. The function of by-pass valve is to prevent reverse flow. In this study, the static analysis has been perform for analyzing fluid flow in open state. In order to consider the turbulent effect, the standard ${\kappa}-{\varepsilon}$ model was used. A variety of parametric studies, such as by-pass valve type or size, volume flow rate, leakage hole size, leakage hole position, block type, block shape, were performed. The pressure difference across the valve in the model broadened the flow channel cross-sectional area was greater than the base model for the same operating conditions. As the pipe diameter in the block decreases the pressure difference is greatly increased. The pressure difference according to block shape such as edge type and round was almost negligible. For the same Reynolds number the pressure difference was little changed according to the size of the valve.

• Journal of the Korean Society for Heat Treatment
• /
• v.26 no.1
• /
• pp.14-20
• /
• 2013

Duplex stainless steel, which is a kind of stainless steel with a mixed microstructure of about equal proportions of austenite and ferrite, is generally known as a unique material with excellent corrosion resistance and high strength. However, toughness, strength, and corrosion resistance of the steel could be reduced due to precipitation of topologically closed packed phases such as sigma phase during cooling. In case of large forged products, they have strong possibility that ${\sigma}$-phase precipitates due to difference of cooling rate between surface and inner of the products. Investigation on sigma phase precipitation behavior of duplex stainless steel with change of cooling rate was carried out in this study. Forged SAF 2205 duplex stainless steel was used as specimens to examine the cooling rate effect. Dissolution behavior of sigma phase was also discussed through resolution test of duplex stainless steel containing lots of sigma phase. Experimental results revealed that impact energy was very sensitive to precipitation of small amount sigma phase. However, sigma phase could be removed by short term resolution treatment and impact resistance of the duplex stainless steel was restored.

• Proceedings of the KOSOMBE Conference
• /
• v.1996 no.11
• /
• pp.142-146
• /
• 1996

In this paper, we present the main research results on the 2 Tesla class - superconducting MRI magnet which we have developed. Multi section type superconducting MRI main coil and various superconducting shims were designed and fabricated for obtaining the high field homogeneity, which is requested in the MR imaging. After assembling the magnet with room temperature bore cryostat field homogenity has been measured and analyzed by NMR field mapping system. According to this, field homogeneity of 22 ppm / 30 cm dsv was confirmed.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2016.05a
• /
• pp.338-338
• /
• 2016

준설은 흙 또는 모래, 자갈을 파내는 작업을 말하는 것으로, 준설의 목적은 수로, 하천, 항만공사에서 수심의 증가 및 수심을 유지하기 위함이다(산업안전대사전, 2004). 이러한 준설은 하천의 흐름 특성 및 제반 여건 변화를 수반하기도 한다. 준설 직후 낮아진 하상으로 인하여 수위가 감소되는 경우가 있으며, 반면에 수위 저하를 동반하지 않는 경우(저수지와 연결된 준설), 준설 부근에 퇴적이 발생하며 이는 하천의 수위 상승으로 연결될 수 있다. 이러한 수위 상승은 홍수 시 제방의 월류 가능성을 높이는 등 하천의 치수 안전성에 문제를 야기할 수 있다. 본 연구에서는 준설로 인한 하천의 수위 상승에 초점을 맞추었다. 기존 연구에서는 대부분 이러한 현상분석을 위해 수치해석을 이용하였으며, HEC-6, CCHE2D, GSTARS 등의 1, 2차원 수치해석 프로그램을 이용하였다. 그러나 1, 2 차원 수치모형은 수심에 따른 흐름특성을 충분히 반영하지 못하는 한계점을 가진다. 이에 본 연구에서는 3차원 수치해석 모형인 SCHISM을 이용하였다. SCHISM은 하구역의 흐름특성을 분석하기 위해 개발된 프로그램으로, 본 연구와 같이 단면의 급 확대부의 수치해석에 적합한 프로그램이라고 판단된다. 기존연구를 바탕으로 하상변동에 영향을 주는 인자를 산정하여 무차원화 하였으며, 하상 변동량 및 수위상승 영향의 민감도 분석을 수행하였다. 무차원인자는 준설깊이/상류수심(H/hu), 하류하폭/상류하폭($W_d/W_u$), 하류수심/상류수심($h_d/h_u$), 유량(Q)으로 결정하였다. 수치해석에 이용된 지형은 1: 2 경사의 제방을 가진 직선수로이며, 준설 구간을 기준으로 상 하류 각각 1,000 m의 길이를 확보하였다. SCHISM 수치모의를 통하여 민감도 분석을 수행한 결과 모든 수치해석 case에서 퇴적으로 인한 상류수위의 증가를 확인 할 수 있었다. 또한 하류수심/상류수심은 준설부 퇴적 및 상류 수위 상승에 가장 큰 영향을 주는 인자로 나타났다. 본 연구는 하천 준설 계획 시 참고자료로 활용이 가능할 것이며, 준설로 인한 하천수리특성 변화의 선행연구로써 의미가 있다고 판단된다.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2007.11a
• /
• pp.241-241
• /
• 2007

We fabricated SmBCO coated conductors(CCs) on IBAD-MgO templates using co-evaporation method. IBAD-MgO templates consist of PLD-LMO/epi-MgO/IBAD-MgO/Ni-alloy and showed good in-plane texture of below FWHM 7 degree. Evaporation rates of Sm, Ba, and Cu were precisely controlled to get the optimum composition ratio after deposition process. To optimize the oxygen partial pressure of reaction region, wide range of the partial pressure was investigated from 1 mTorr to 15 mTorr. By reducing the oxygen partial pressure to 5mTorr, (103)grains in SmBCO layer have been increased. On the other hand, there were only (001)grains in SmBCO layer deposited at 15 mTorr $O_2$. Deposition temperature was also investigated from $600^{\circ}C\;to\;800^{\circ}C$ to make high Ic SmBCO CCs. SmBCO on IBAD MgO template showed that the Ic increased gradually at higher growth temperature to $800^{\circ}C$, which the highest Jc and Ic is $2.6\;MA/cm^2$ and 500 A/cm-w., respectively.

• Electronics and Telecommunications Trends
• /
• v.12 no.3 s.45
• /
• pp.11-17
• /
• 1997

ITS(Intelligent Transportation System)는 H/W 중심의 차량 및 교통 기반 기설에 통신.전자.제어.컴퓨터 등 S/W 중심의 기술을 적용하여, 각 차량 및 교통 시설(신호등, 도로, 교통 안내 표지판, 도로 상황판 등)들이 상호 보완적으로 작동할 수 있게 함으로써, 기존의 도로 교통 시설의 이용 효과를 극대화하고, 그 안정성을 향상시키며, 교통 수요 관리를 목적으로 사용자에게 교통 정보를 제공하는 지능형 종합 기술 체계이다. 이러한 최첨단 도로교통 관리의 ITS를 이용한 서비스는 각 나라마다 달리 정의되는데, 우리나라에서는 첨단교통관리시스템(ATMS), 첨단교통정보시스템(ATIS), 상용차량 운행관리 시스템(CVO), 차량 및 도로 시스템(AVCS) 그리고 첨단 대중교통 시스템(APTS)의 5개 분야로 나누어진다(1). 이 다섯가지 ITS 서비스 시스템은 공통적으로 정보 수집, 정보 처리, 정보 전달, 정보 통신 기능을 가지고 있다. 즉, 각종 검지기, 차량 단말, 노변 단말 등의 수집 장치에서 수집된 정보(정보 수집)는 관련 통신 방식(정보 통신)을 통하여 중앙 정보 처리 센터에 전달되어 그 서비스 요구 사항에 따라 처리(정보 처리)되고, 생성된 정보는 해당되는 통신 채널을 거쳐(정보 통신) 각종 사용자 단말기에게 제공(정보 전달)된다. 본 논문에서는 이와 같은 ITS체계의 정의, 목표 및 서비스 종류에 대하여 설명하였으며 교통 정보를 수집하고 처리하여 전달하는 과정과 이에 요구되는 통신 체계에 대하여 알아본다.

• Journal of Advanced Marine Engineering and Technology
• /
• v.38 no.7
• /
• pp.834-843
• /
• 2014

A two-stage electrostatic precipitator (ESP) using a carbon brush charger and a plate-plate parallel aluminum collector was developed and its application for removal of oil mist aerosols was investigated. Charge number per particle and particle collection efficiency at different applied voltage to the carbon brush charger were measured and compared to those obtained by theoretical calculations. A long-term operation of the ESP during 9 weeks was also performed to evaluate its performance durability for oil mists. Average charge number per mist particle increased with the applied voltage to the charger, and thus the collection efficiency of the mist particles also increased overall at the particle size range of 0.26 - 3 mm. The tendencies of the average charge number per particle and particle collection efficiency obtained from theoretical calculations were considerably consistent with those of the experimental results. Particle collection efficiency of ~99 % at 0.3 mm could be achieved by power consumption of only 0.0033 W/($m^3/h$) at the face velocity of 1 m/s and its collection performance maintained stably during every 8 hr operation per day for 9 weeks with little increase of pressure drop.

• Korean Journal of Mineralogy and Petrology
• /
• v.34 no.3
• /
• pp.169-176
• /
• 2021

This study aimed to fundamentally understand structural changes of zeolite under pressure and in the presence of different pressure-transmitting media (PTM) for application studies such as immobilization of heavy metal cation or CO₂ storage using pressure. High-pressure X-ray powder diffraction study was conducted on the zeolite-W (K_6.4Al_6.5Si_25.8O₆₄× 15.3H₂O, K-MER) to understand linear compressibility and the bulk moduli in different PTM conditions. Zeolite-w is a synthetic material having the same framework as natural zeolite merlinoite ((K, Ca_0.5, Ba_0.5, Na)₁₀ Al₁₀Si₂₂O₆₄× 22H₂O). The space group of the sample was identified as I4/mmm belonging to the tetragonal crystal system. Water, carbon dioxide, and silicone-oil were used as pressure-transmitting media. The mixture of sample and each PTM was mounted in a diamond anvil cell (DAC) and then pressurized up to 3 GPa with an increment of ca. 0.5 GPa. Pressure-induced changes of powder diffraction patterns were measured using a synchrotron X-ray light source. Lattice constants, and bulk moduli were calculated using the Le-Bail method and the Birch-Murnaghan equation. In all PTM conditions, linear compressibility of c-axis (𝛽^c) was 0.006(1) GPa^-1 or 0.007(1) GPa^-1. On the other hand, the linear compressibility of a(b)-axis (𝛽^a) was 0.013(1) GPa^-1 in silicone-oil run, which is twice more compressible than the a(b)-axis in water and carbon dioxide runs, 𝛽^a = 0.006(1) GPa^-1. The bulk moduli were measured as 50(3) GPa, 52(3) GPa, and 29(2) GPa in water, carbon dioxide, and silicone-oil run, respectively. The orthorhombicities of ac-plane in the water, and carbon dioxide runs were comparatively constant, near 0.350~0.353, whereas the value decreased abruptly in the silicone-oil run following formula, y = -0.005(1)x + 0.351(1) by non-penetrating pressure fluid condition.

• Resources Recycling
• /
• v.7 no.1
• /
• pp.27-33
• /
• 1998

A study on thc recovcry oi nickel from waste pickling solutions removed li-ee nil~ica cid and hydmflnoric acid is carried out with pulsed column extractor for thc industrial application. The ~esults show that thc Iron and chromium arc efteclively elunmatcd from the waste solution by precipitalion as the form of hydraxidc with thc adjustment of pH with CaCO;, whlle the nickel is not prcc~pitatcd. Thc cxlraction eficicncy ol nickel with column cxtraclor generally improves 8s the pulse velosity (product of amplmde and frequency) incrcascs, optimum pcrfarmancc typically occuring slightly below an amplihldefrecluency product which results in flooding the column because of excessive emulsiIicalian And the nickel loaded in the organic is erfeclively conce~~trtratebdy ZM H2S0,, ~ I It he stlipping stage. The solubility of NiSO, in the H,SO, solution dccreaaes w~th thc higher H,SO, concentralion and appears to be 55 grL in the 2M HSO* solulian.