Browse > Article
http://dx.doi.org/10.5916/jkosme.2014.38.7.834

A study on particle collection efficiency of a low power consumption two-stage electrostatic precipitator for oil mists collection  

Song, Chi-Sung (Nuclear Engineering International (NEI))
Abstract
A two-stage electrostatic precipitator (ESP) using a carbon brush charger and a plate-plate parallel aluminum collector was developed and its application for removal of oil mist aerosols was investigated. Charge number per particle and particle collection efficiency at different applied voltage to the carbon brush charger were measured and compared to those obtained by theoretical calculations. A long-term operation of the ESP during 9 weeks was also performed to evaluate its performance durability for oil mists. Average charge number per mist particle increased with the applied voltage to the charger, and thus the collection efficiency of the mist particles also increased overall at the particle size range of 0.26 - 3 mm. The tendencies of the average charge number per particle and particle collection efficiency obtained from theoretical calculations were considerably consistent with those of the experimental results. Particle collection efficiency of ~99 % at 0.3 mm could be achieved by power consumption of only 0.0033 W/($m^3/h$) at the face velocity of 1 m/s and its collection performance maintained stably during every 8 hr operation per day for 9 weeks with little increase of pressure drop.
Keywords
Oil Mist; Carbon Brush; Electrostatic Precipitator; Power Consumption; Metalworking Fluid;
Citations & Related Records
Times Cited By KSCI : 1  (Citation Analysis)
연도 인용수 순위
1 W. A. Heitbrink, D. E. Evans, T. M. Peters, and T. J. Slavin, "Characterization and mapping of very fine particles in an engine machining and assembly facility", Journal of Occupational and Environmental Hygiene, vol. 4, no. 5, pp. 341-351, 2007.   DOI   ScienceOn
2 J. B. Lee, K. H. Kim, H. J. Kim, S. J. Cho, K. Jung, and S. D. Kim, "Emission rate of particulate matter and Its removal efficiency by precipitators in under-fired charbroiling restaurants", Journal of the Scientific World, vol. 11, pp. 1077-1088, 2011.   DOI   ScienceOn
3 Y. S. Hwang, H. J. Park, G. H. Chung, D. H. Kim, and B. K. Na, "Odor removal of discharge gas from tenter facility in textile industry using pilot-scale EFC (Electric Fume Collector)", Korean Journal of Odor Research and Engineering, vol. 10, pp. 136-141, 2011.
4 C. S. Yi, H. J. Shin, and C. W. Lee, "A study on dust collection efficiency of axial-vane type cyclone for oil mist", Journal of the Korean Society of Manufacturing Technology Engineers, vol. 21, pp. 415-420, 2012.   과학기술학회마을   DOI   ScienceOn
5 H. J. Kim, B. Han, Y. J. Kim, S. J. Yoab, and T. Oda, "Integration of a nonmetallic electrostatic precipitator and a wet scrubber for improved removal of particles and corrosive gas cleaning in semiconductor manufacturing industries", Journal of the Air & Waste Management Association, vol. 62, pp. 905-915, 2012.   DOI   ScienceOn
6 R. Cochet, "Lois charge des fines particules (submicroniques) etudes theoriques-controles recents spectre de particules", Colloque International La Physique Des Forces Electrostatiques Et Leurs Application, vol. 102, pp. 331-338, 1961.
7 SPS-KACA002-132, "Indoor air cleaner", Korea Air Cleaning Association Standard (KACAS), 2006.
8 W. C. Hinds, Aerosol Technology: Properties, Behavior, and Measurement of Airborne Particle, 2nd ed. Wiley, New York, 1999.
9 R. C. Flagan and J.H. Seinfeld, Fundamentals of Air Pollution Engineering, Prentice-Hall, Inc., Englewood Cliffs, New Jersey, 1988.
10 L. K. Wang, N. C. Pereira, and Y. T. Hung, Air Pollution Control Engineering, Humana Press, Totowa, NJ, 2004.
11 A. Ronneberg and K. Skyberg, "Mortality and incidence of cancer among oil exposed workers in a Norwegian cable manufacturing company Part I Exposure conditions 1920-79", British Journal of Industrial Medicine, vol. 45, no. 9, pp. 589-594, 1998.
12 J. Thornburg and D. Leith, "Mist generation during metal machining," Transactions of the ASME, vol. 122, pp. 544-549, 2000.
13 J. M. Yacher, W. A. Heitbrink, and E. G. Burroughs, "Mist control at machining center, Part 2: Mist control following installation of air cleaners", Journal of the American Industrial Hygiene Association, vol. 61, pp. 282-89, 2000.   DOI
14 M. Boundy, D. Leith, D. Hands, M. Gressel, and G. E Burroughs, "Performance of industrial mist collectors over time", Applied Occupational and Environmental Hygiene, vol. 15, pp. 928-935, 2000.   DOI
15 W. A. Heitbrink, D. E. Evans, T. M. Peters, and T. J. Slavin, "Characterization and mapping of very fine particles in an engine machining and assembly facility", Journal of Occupational and Environmental Hygiene, vol. 4, pp. 341-351, 2007.   DOI   ScienceOn
16 M. P. Fraser, Z. W. Yue, and B. Buzcu, "Source apportionment of fine particulate matter in Houston, TX, using organic molecular markers", Atmospheric Environment, vol. 37, pp. 2117-123, 2003.   DOI   ScienceOn
17 J. B. Lee, K. H. Kim, H. J. Kim, S. J. Cho, K. Jung, and S. D. Kim, "Emission rate of particulate matter and Its removal efficiency by precipitators in under-fired charbroiling restaurants", Journal of the Scientific World, vol. 11, pp. 1077-1088, 2011.   DOI   ScienceOn
18 D. Leith, J. Volckens, M. G. Boundy, and D. Hands, "Control methods for mineral oil mists", Applied Occupational and Environmental Hygiene, vol. 18, pp. 883-889, 2003.   DOI   ScienceOn
19 G. M. Letts, P. C. Raynor, and R. L. Schumann, "Selecting brush materials to improve mist filters", Aerosol Science, vol. 34, pp. 1481-1492, 2003.   DOI   ScienceOn