• The KIPS Transactions:PartA
• /
• v.9A no.1
• /
• pp.1-8
• /
• 2002

Most of the traditional embedded web server systems have been designed for monitoring and controlling some dedicated equipments. Hence, not only they have no generality and flexibility but also they are too expensive for the lower-cost domestic equipment. To cope with these difficulty, we suggest a lower-cost ${\mu}$-embedded web server model which is suitable for monitoring and controlling the industry or house equipments by using the internet. The suggested model is based on an one-chip ${\mu}$-processor in which the ISP (In-System Programming) function and flash ROM are embedded basically to minimize the cost of H/W and S/W. Also it allows to add an new function dynamically to provide the generality and flexibility. Finally, to evaluate the feasibility of the suggested model, we have manufactured a test-board based on the ATMega103 ${\mu}$-processor and programmed the control program and tested it on the MS Explorer 5.0 environment.

• 대한임상약리학회:학술대회논문집
• /
• 2001.12a
• /
• pp.46-46
• /
• 2001

• Proceedings of the KIEE Conference
• /
• 1992.07b
• /
• pp.1196-1198
• /
• 1992

In field oriented control of Induction motors, speed sensor is required, which reduces the sturdiness of drive system and together with the expenditure of hardware for faultless transmission and processing of sensor signals it causes considerable expenses. These expensive sensors can be replaced by speed sensorless concept. And for good control, the knowledge of the rotor flux component of the rotor resistance are needs. Thus, this paper is based on a Extended Kalman Filter( EKF ) that estimates the state variables that are required for the control by only measuring the line voltages and currents of the machine. The rotor time constant and speed estimated by the EKF shows satisfactory agreement with the real values, with the simulation approaches.

• Proceedings of the Korean Information Science Society Conference
• /
• 2006.06b
• /
• pp.331-333
• /
• 2006

다양한 환경을 포항하고 있는 동영상에서 움직이는 객체를 추출, 인식하기 위해서는 배경 모델링이 중요하다. 기존의 대표적인 배경 모델링 방법으로 통계적 방법을 이용한 $W^4$ 방법이 있지만 칼라 영상의 다양한 환경에서 한계를 보인다. 본 논문은 큐 기반 배경 모델링을 이용한다. 이때 주요한 환경 변수가 되는 슬라이딩 윈도우의 큐 크기와 RGB 값의 그룹핑 크기, 프레임의 갱신검사 주기를 적응적으로 결정하기 위한 방법을 제안한다. 환경 변수를 결정하기 위친 객체 검출율, 객체 오검출율, 갱신율을 평가 기준으로 삼는다. 제안된 방법으로 실시간 처리에 부적합한 기존의 영상 처리 기법들을 개선하여 보다 효과적으로 객체를 인식할 수 있다.

• Proceedings of the KAIS Fall Conference
• /
• 2012.05a
• /
• pp.265-268
• /
• 2012

중소기업의 정부지원 정책에 대한 만족도를 분석하여 정부지원 정책을 수립할 때 참조할 수 있도록 연구하였다. 정부지원 정책으로 자금지원, 기술개발지원, 인력양성지원, 판로 지원 등 4개 분야로 구분하여 각각 만족도롤 분석하였고, 사업성과, 기술개발 성과, 정부 정책의 성과를 분석하여 상관성 분석을 실시하였다.

• Proceedings of the KIEE Conference
• /
• 2005.07a
• /
• pp.292-294
• /
• 2005

전력계통에 고장이 발생할 경우 dc성분이 많이 포함된 고장전류가 발생될 가능성이 높아진다. 이때, 고장이 발생 되었다가 dc성분이 소멸되면서 만들어낸 자속이 CT의 포화에 가장 큰 영향을 미치게 된다. 특히 발전소 구내에서 고장이 발생되면 dc성분이 많이 포함된 고장전류가 발생되어 CT가 포화하는 현상을 자주 볼 수 있다. 이로 인해 보호계전기에 유입되는 2차 전류가 왜곡되고 이로 인해 보호계전기가 오동작을 하게 된다. 본 논문에서는 대용량 발전소의 스위치야드 차단기 혹은 모선에서 발생한 고장으로 Unit 보호계전기가 오동작한 사례를 분석한 내용이다.

• Proceedings of the KIEE Conference
• /
• 2000.11a
• /
• pp.149-151
• /
• 2000

This paper compares the measurement values of harmonics to the analysis results in railroads testing system. Therefore, in this paper, new program to calculate THD(Total Harmonic Distortion) and measuring system of harmonics are developed. The harmonic measurement point is PCC(Point of Common Coupling), the primary side(154kV) of scott transformer, and the analysis is performed based on real KEPCO system data. As a result of this study, it is possible to present basic data and informations about harmonic problems which can be occurred in the future commercial railroad systems.

• Proceedings of the KIEE Conference
• /
• 1996.07c
• /
• pp.1489-1491
• /
• 1996

The effect of Ag alloy sheath have been investigated in terns of critical current density and mechanical property. Nevertheless the continuous improvement of critical current density($J_c$) of Ag sheathed Bi2223 oxide superconducting wire processed with powder in tube(PIT) method, poor mechanical strength is still considered to be demerits for power application. In this study, we prepared two kinds of Ag- x wt% Cu alloy and pure Ag sheathed Bi2223 superconducting tapes. The hardness and tensile strength of prepared tapes has been measured. Their mechanical propertes were improved by Ag alloying.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2012.10a
• /
• pp.815-817
• /
• 2012

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2002.04a
• /
• pp.50-54
• /
• 2002

Influences of bending strain on the critical current ($I_c$) in Ag-sheathed Bi-2223 superconducting tapes at 77K were investigated. The effect of bending mode on the bending strain characteristics was discussed in viewpoints of sample geometry, n-value and damage morphology. Especially, in this paper, we reported the $I_c$ behavior in Ag alloy sheathed Bi-2223 multifilamentary superconducting tapes under hard bending. As a result, $I_c$ degradation behavior of the hard bending appeared remarkably than the case of easy bending, but it did not influence greatly on the n-value.