• International journal of advanced smart convergence
• /
• v.2 no.2
• /
• pp.19-22
• /
• 2013

As the demand of the LED for lighting that emits light by p-n junction is increasing, studies on heatproof plate technology is being conducted to minimize the temperature of the LED lighting. As for the temperature of the LED devices, their light emitting efficiency decreases and the maximum lifespan drops down to 1/5. Therefore there are heat dissipation studies going on to minimize the heat. For LED heat dissipation, aluminum heat sink plates are mostly used. For this paper, we designed heat sink that fits residential 20W COB LED Down Light; packaged the heat sink and 20W COB and analyzed and evaluated the thermal properties through a Solidworks flow simulation. We are planning to design the optimal heat sink plate to solve the thermal agglomeration considering TIM(Thermal Interface material).

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.28 no.2
• /
• pp.131-136
• /
• 2015

We develop the 60 W class hybrid solar LED street lamp controller. The controller is providing power via an inverter in the day with the least solar cell and battery and charging the battery for the ESS, acts as a power failure, the built-in battery. Rated output of the fabricated LED street lamp is 300 W or greater battery capacity 300 Wh, discharge time 10 hr, LED street lamp efficiency showed a very high level of light efficiency by about 127 lm/W. In addition, as a result of light distribution pattern according to the distance and the light intensity measurement will be able to ensure a very high quality, show the constant brightness in the distance from the road lights 6 m is about 35~40 lux in uniformity ratio. The proposed hybrid solar LED street lamp system showed a high energy capacity of approximately 1.5 to 152.7% power generation efficiency than typical conventional solar street lamp.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.11 no.4
• /
• pp.1203-1209
• /
• 2010

LED lights as a newly-growing industry are highly energy-efficient and have drawn lots of attention due to higher illuminance and longer life compared to other light sources. In this study, MR16 lights with one high-power LED were considered for the replacement of the previous halogen lights or LED lamps with many LEDs. Thus, fundamental experiments of LED on a MCPCB, 3-dimensional numerical analysis for heatsink design and performance tests of the prototype lights have been done and the MR16 LED lights have been successfully developed.

• Journal of Bio-Environment Control
• /
• v.24 no.2
• /
• pp.106-112
• /
• 2015

The objective of this study was to examine the growth reaction of strawberry plants to the mixed red and blue LED sources and their installation method. The artificial light sources were : LED PAR(PPFD $2{\sim}4{\mu}mol{\cdot}m^{-2}{\cdot}s^{-1}$), LED BAR(PPFD $100{\sim}120{\mu}mol{\cdot}m^{-2}{\cdot}s^{-1}$) and incandescent(PPFD $2{\sim}4{\mu}mol{\cdot}m^{-2}{\cdot}s^{-1}$) lamp. The lighting treatment was started at the first cluster flowering period as a night breaking lighting and was applied during 3 hours, between 22:00 and 01:00 every day. Plant height and leafstalk length were longer in plants treated with incandescent lamp, where as fresh and dry weight of shoot were heavier in LED PAR compared to incandescent lamp treatment. LED PAR treatment also resulted in the largest leaf area, chlorophyll content was increased by $0.36mg{\cdot}g^{-1}$ after 60 days from the starting of the artificial lighting. According to the experimental results application of 16W LED PAR lamps and W-type installation method can improve light environment in strawberry lighting culture.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.30 no.3
• /
• pp.94-105
• /
• 2016

The objective of the work was to evaluate the impact of lighting energy to cooling and heating consumption in medium scale office building, when currently installed fluorescent lights were replaced with various LED lighting fixtures. This evaluation comes from an integrated approach combining the proper indoor lighting environment and the thermal aspects of cooling & heating consumption in office building. These simulations were performed by coupling an appropriate luminaire analysis for energy consumption and a dynamic thermal simulation software (TRNSYS). To analyze comparative study of effects on the heating, cooling loads, and energy consumption of an LED lamp application, 2 types of LED lamp with low light power watt(LPW) 24W and high LPW 7.5W and a fluorescent lights(FL) with 37W are used respectively. Integrated building energy consumption decreased up to 3.2% when fluorescent lamps were replaced with LEDs. Thus, the high LPW of LED(7.5W) replaced with the same number of FL shows an effective energy saving and cost- effective luminary.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.59 no.11
• /
• pp.2038-2042
• /
• 2010

In this paper, we confirmed the thermal & optical properties for improving the heat transfer coefficient by changing the via hole size and in FR4 PCB with the same area. Osram 1W power LED Package (Golden Dragon) was used and the K-factor which is relative constant between LED junction temperature and forward bias was measured with power source meter(KEITHLEY 2430) to measure the thermal resistance from PCB configuration. As results, thermal resistance in metal PCB came out to the lowest as $26 [^{\circ}C/W]$ and thermal resistance in FR4 PCB without via-holes emerged as the highest as $69 [^{\circ}C/W]$. However thermal resistance of FR4 PCB could have decreased until $32[^{\circ}C/W]$ in 0.6 mm by using the via hole. Also, the luminous flux could have improved, too.

• Proceedings of the KSR Conference
• /
• 2011.10a
• /
• pp.1517-1522
• /
• 2011

Recently, application of LED luminaires has been issued for energy saving plan. In this paper, we carried out a study to replace a low efficacy sealed-beam lamp for headlight of railroad vehicles with LED luminaire. Electrical and optical characteristics of the sealed-beam lamp were analyzed and a LED headlight was designed and fabricated. Total luminous efficacy and rated power of the prototype LED headlight were 82 lm/W ; about 5 times higher, and 40W ; about 4 times lower than the sealed-beam lamp, respectively. Especially, lifetime of the sealed-beam lamp is short as 1,000 hours due to the evaporation and vibration of filament, but that of LED headlight is over 30,000 hours long.

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2007.11a
• /
• pp.71-76
• /
• 2007

본 논문에서는 고 연색성의 실시간으로 색온도 제어 가능한 승강기용 조명제품 개발을 위하여 제품에 사용될 LED Package를 제작하고 고연색성 실현을 위한 색온도 제어 기초실험을 행하였다. 그리고 20W 급의 LED 광원모듈 구동회로와 색온도 제어를 위한 제어회로를 설계하였다. 또한 음영 제거 및 글레어 차단, 효과적인 광색혼합을 위하여 확산배광을 달성하기 위한 R, G, B, A, W LED의 최적 배치 및 렌즈의 광학설계를 수행하였고 LED에서 발생하는 열을 효과적으로 발산하여 LED 조명모듈의 온도를 낮추기 위한 방열설계를 실시하였다.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.33 no.5
• /
• pp.418-426
• /
• 2020

This study tested the electrical, structural, and thermal safety of LED lighting products, available on the market. Five recessed LED systems, 20 W each, and five fixed LED systems, 25 W each, were selected. Dielectric strength tests, live part electric shock protection tests, and thermal tests were conducted on the LEDs. These were key tests for user safety, according to the specification of the safety criteria for electric products, KC 60598-1, South Korea. In addition, the wiring temperature of UL1007, 60227 IEC 08, and UTP cables, was measured. The results of the study gave an in-depth examination of the safety of LED lighting systems for users.

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2008.05a
• /
• pp.126-129
• /
• 2008

최근 들어 기존 조명기구를 대신하여 LED 조명기구가 크게 각광을 받고 있다. 이는 LED의 장점인 낮은 소비전력과 긴 수명 때문인 것으로 생각된다. 하지만, 빛을 확산시켜야 하는 조명관점에서 본다면 LED 조명기구에도 개선해야 할 부분도 많아지는 것도 사실이다. 본 논문에서는 LED 조명기구에서 빛의 확산을 위해 사용되어지는 고가의 반사판에 대해 실제 개발된 조명기구의 배광곡선 분석과 시뮬레이션을 통해 확산효과를 면밀히 분석함으로써 향후 LED 조명기구의 설계에 있어서 기술 및 경제적 관점에서 도움을 주고자 한다.