• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2011.07a
• /
• pp.548-551
• /
• 2011

본 연구에서는 방송 촬영용 LED Spot 조명기기를 두 가지 형태로 개발하여, 현재 방송용 스튜디오 조명기기가 설치되어 있는 공간에서 다수 사용되고 있는 영국의 Arri사 650W와 1000W Fresnel Spot 조명기기와 조도, 색온도, 연색성 등의 비교 데이터 측정과 피사체의 촬영 시 영상 및 연색성에 따른 색상을 비교 측정하였다. 그리고 방송 촬영용으로 LED Spot 조명기기가 대체 가능한지를 판단하기 위하여 성능평가분석 하였다.

• Journal of Conservation Science
• /
• v.34 no.2
• /
• pp.77-85
• /
• 2018

In order to understand the influence of light artifact discoloration, priority must be given to the reaction characteristics of the light the materials constituting the product. In this study, we focus on two representative medium, animal glue and linseed oil which constitute the colored layer of the painting relics. This study is based on an accelerated degradation test using two types of light emitting diods (LEDs) with different wavelength characteristics. In the experiments, discoloration appeared markedly in the animal glue and linseed oil under accelerated aging test conditions using Blue LED. Among the two types of LEDs, the degree of discoloration of the material was much higher with the Blue LED having the total radiation flux (mW). This indicates that the discoloration of painting artifacts such as animal glue and linseed oil is more significantly influenced by the total radiation flux (mW) of the light source than the total luminous flux (lm).

• The Journal of the Korea institute of electronic communication sciences
• /
• v.12 no.6
• /
• pp.1219-1226
• /
• 2017

In this paper, it is performed the optimal design of the UV LED bar which can be used variously. The UV LED Bar emits ultraviolet rays, so it is important to emit ultraviolet rays constantly for the purpose of use. In order to emit a certain amount of ultraviolet rays as ever, the ultraviolet ray emission should be driven by a constant current source within the operable input voltage range. And also the heat dissipation is particularly important because of the long ultraviolet emission retention time due to the UV utilization characteristics. In addition, since human body protection is essential, the algorithm is configured to operate according to human body detection using distance sensor and Bluetooth. Three 365nm UV LEDs were used in series to emit ultraviolet UVA, operating at the constant current of 500mA with an efficiency of 87.5% and a power consumption of 6.006W. The ultraviolet radiation dose was measured at $5.35mW/cm^2$ at the distance of 10 cm when measured by the Lutron ultraviolet measuring instruments.

• Journal of Advanced Marine Engineering and Technology
• /
• v.38 no.6
• /
• pp.737-743
• /
• 2014

This paper dealt with a retrofit high power LED searchlight to replace conventional 1kW halogen searchlights. The design specification meets KDS 6230-1046-1 and KS V 8469. An optical lens with the beam angle of $6^{\circ}$ was used to meet the luminous intensity of 800,000cd at $0^{\circ}$ in horizontal line. Heat dissipation of the LED searchlight adopted a free air cooling type which does not use a fan or a heat-pipe. From the test results, power consumption of the prototype LED searchlight was 148W which was saved by 85% comparing a halogen searchlight of 1kW. Luminous intensity was 945,000cd at $0^{\circ}$ in horizontal line, satisfying KS V 8469. Luminous efficacy was improved by 4.7 times higher than that of the halogen searchlights. Beam angle, color temperature, and color rendering index(CRI) was $5.4^{\circ}$, 5,500K, and 70, respectively. Surface temperature of the LED searchlight was below $60^{\circ}C$ and surrounding temperature of the SMPS installed inside was below $50^{\circ}C$ which were satisfied with the IEC 60092-306.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.21 no.1
• /
• pp.46-50
• /
• 2012

This paper amis at improving the heat radiation performance of thermoelectric module (TEM) for a commercialization of high-powered LED light with using a multichip LED module. In addition, a 10W multichip LED light was prepared for the heat performance on radiating of which LED light was made for a use of testing by the driving of the thermoelectric module. So, it was found that about 30% in the effect of temperature reduction was confirmed if compared with the radiation heat by heat sink only.

• Proceedings of the KIEE Conference
• /
• 2006.07c
• /
• pp.1661-1662
• /
• 2006

고출력 LED의 전기적 광학적 열적인 특성을 분석한 결과를 토대로 MCPCB를 사용하지 않고 전구 형태의 좁은 면적에 고출력 1W LED를 배열하고, 적외선 카메라와 ICEPAK(열유동해석 프로그램)을 이용하여 14개의 LED 배열에 대한 LED 전구의 최적방열 및 기구 설계를 실시하였다. LED 전구에 대한 정전압과 정전류 제어방식의 고효율 구동회로를 제작하여, 약 70% 이상의 회로 효율과 약 95% 이상의 고역률, 약 20lm/W 이상의 고효율 LED 전구를 실현하였다. 정전압 구동회로는 동작시간에 무관하게 일정한 광출력을 나타내며, 정전류 구동회로는 초기 시동시 높은 광출력을 나타내고 동작시간의 경과에 따라 광출력 감소율이 높게 나타냄을 알 수 있다.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.14 no.3
• /
• pp.243-250
• /
• 2009

This paper provides an novel two-stage LED driver circuit for LED lighting equipment. The proposed driver circuit reduces voltage stress in LED driver circuit by using multi-level output voltage of PFC flyback converter. The proposed circuit satisfies IEC61000-3-2 class C regulation that is applied to lighting equipment over 25W and uses PWM to control brightness of wide extent. In this paper, the principle of proposed driver circuit is presented. A prototype has been built and tested. The experimental results are presented to show the validity of the proposed circuit.

• Korean Journal of Plant Resources
• /
• v.32 no.3
• /
• pp.228-236
• /
• 2019

This study is conducted to investigate the effects of growth characteristics (GC) and DPPH radical scavenging activity (DRSA) of the heading lettuce 'Fidel' depending on four concentrations of activated mineral groups (AMG: 1.6% active minerals and 0.03% CaO) added to basic nutrient solutions (diluted by 0, 0.05, 0.1, and 0.2%) and on four different light-emitting diodes (LED; B:R:W ratio = 0:1:12, 0:1:9, 0:5:5, and 2:3:5). Both 0.1 and 0.2% AMG showed better GC of lettuce in plant width, plant length, leaf width, leaf length, and the number of leaves than those of other AMG, while leaf thickness and chlorophyll value did not show significant difference among all AMG. Moreover, 0.1 and 0.2% AMG showed heavier shoot fresh weights than those of other AMG. As for the combinations of AMG and LED, B0:R5:W5 showed the best lettuce GC regardless of AMG compared to other AMG and LED combinations. As shown in the above results of LED, although there was a difference in lettuce growth by LED, the differences of lettuce growth by AMG were statistically significant. The DRSA was the highest at 82.8% in B2:R3:W5, followed by B0:R5:W5 at 77.8%. LED showed differences but AMG did not affect DRSA. Therefore, the optimal conditions in plant factory for GC and DRSA of the lettuce were 0.1% AMG and B0:R5:W5.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.7 no.3
• /
• pp.485-490
• /
• 2012

In this paper, driver circuit of LED lights for ships is designed and implemented to replace conventional lights with filament which have short life time due to vibration of ships. The driver of LED module is switching circuit without transformer to reduce volume and cost. As switch circuit controls input 220 VAC with PWM, LED module is reliably driven. Power factor is improved by using valley-fill PFC compensation circuit which is handled to pulse current of switching circuit. Serial-parallel LED circuit is applied to reduce change period of lights of long-term navigation ships. Array of serial-parallel can operate even if some of LEDs is damaged. It is suitable for ships that power consumption and power factor of lights including developed drive circuit have 39Watt and 0.925 respectively.

• Journal of Mushroom
• /
• v.20 no.2
• /
• pp.78-85
• /
• 2022

The consumption of Flammulina velutipes mushroom imported from Korea has been associated with the cases of listeriosis in the United States, Canada, and Australia. We investigated the effect of sanitizing the plastic wrapper (used in packaging F. velutipes) with slightly acidic electrolyzed water (SAEW) and ultraviolet C waterproof light-emitting diode (UVC-W-LED) on reducing the Listeria monocytogenes. Further, the effect of UVC-LED on L. monocytogenes growth in F. velutipes at different storage temperatures (2, 4, and 10℃) was determined. The combined (SAEW+UVC-W-LED) treatment for 5-10 min reduced 99.9% of bacterial population from the contaminated plastic wrapper. In addition, the UVC-LED treatment for 3 min reduced the L. monocytogenes concentration in F. velutipes by 0.47 log CFU/g. Moreover, the growth of L. monocytogenes in the treated mushrooms was slower than that of the untreated (control) ones. L. monocytogenes concentration in F. velutipes increased over 3 log CFU/g at 2℃ and 10℃ for 60 and 10 days, respectively. The growth of L. monocytogenes at the bottom of mushrooms was faster than that at the top at both the temperatures. These results indicate that the combined SAEW+UVC-W-LED treatment of plastic wrappers and the UVC-LED treatment of mushrooms can be used as potential hurdle technologies to control the risk of L. monocytogenes in mushrooms prior to packaging at farms.