DOI QR코드

DOI QR Code

The UV LED Bar Optimal Design with Human Detection and Control Function

인체 감지 제어 기능을 갖는 UV LED Bar의 최적 설계

  • 김창선 (미래에너지기술연구소) ;
  • 이재학 (송원대학교 전기전자공학과) ;
  • 고영진 (순천제일대학교 전기자동화과)
  • Received : 2017.10.25
  • Accepted : 2017.12.15
  • Published : 2017.12.31

Abstract

In this paper, it is performed the optimal design of the UV LED bar which can be used variously. The UV LED Bar emits ultraviolet rays, so it is important to emit ultraviolet rays constantly for the purpose of use. In order to emit a certain amount of ultraviolet rays as ever, the ultraviolet ray emission should be driven by a constant current source within the operable input voltage range. And also the heat dissipation is particularly important because of the long ultraviolet emission retention time due to the UV utilization characteristics. In addition, since human body protection is essential, the algorithm is configured to operate according to human body detection using distance sensor and Bluetooth. Three 365nm UV LEDs were used in series to emit ultraviolet UVA, operating at the constant current of 500mA with an efficiency of 87.5% and a power consumption of 6.006W. The ultraviolet radiation dose was measured at $5.35mW/cm^2$ at the distance of 10 cm when measured by the Lutron ultraviolet measuring instruments.

본 논문에서는 다용도로 사용 가능한 UV LED 바의 최적설계를 하였다. UV LED는 자외선을 방출하기 때문에 사용목적상 일정하게 자외선을 방출하는 것이 중요하다. 일정한 자외선이 방출되기 위해서는 동작 가능 입력 전압 범위 내에서 정전류원으로 구동되어야 하고 자외선 활용 특성 상 자외선 방출 유지 시간이 길기 때문에 방열이 특히 중요하다. 따라서 소비전력이 최소화 되도록 설계해야 한다. 또한 인체 보호가 필수적이기 때문에 거리 감지 센서와 블루투스를 이용해 인체 감지 여부에 따라 동작할 수 있게 알고리즘을 구성하였다. 자외선 UVA를 방출하기 위해 365nm UV LED 3개가 직렬로 사용되었으며 입력 전압 12V와 정전류 500mA에서 동작하며 효율은 87.5%, 소비전력은 6.006W이다. 그리고 자외선 조사량은 루트론 계측기로 측정하였을 경우 10cm 거리에서 $5.35mW/cm^2$으로 측정 되었다.

Keywords

References

  1. J. Shin, S. Kim, and D. Kang, "Fundamental Characteristics of Deep-UV Light-Emitting Diodes and Their Application To Control Foodborne Pathogens," American Society for Microbiology, Applied and Environmental Microbiology, vol. 82, no. 1, 2016, pp. 2-10. https://doi.org/10.1128/AEM.01186-15
  2. K. Lee., "Design of Adaptive Current Control Circuits for LEDs," J. of the Korea Institute of Illuninating and Electrical Installation Engineers, vol. 29, no. 12, 2015, pp. 8-14.
  3. K. Lee, J. Kim, S. Yeo, S. Cho, and S.Kim "Study on Low Power LED Display Operation," J. of the Korea Institute of Electronic Communication Sciences. vol. 10, no. 5, 2015, pp. 587-592. https://doi.org/10.13067/JKIECS.2015.10.5.587
  4. S. Kwak, "Design and Implementation of LED LIghting System with Adjustable Brightness and Color Capability," J. of the Korea Institute of Illuminating and Electrical Installation Engineers, vol. 10, no. 5, 2015, pp. 579-586.
  5. J. Song, J. Park, and B. Yoon, "Design and Implementation of Transformerless 40W LED Light Driver Circuit for Ships," J. of the Korea Institute of Electronic Communication Sciences, vol. 7, no. 3, 2012, pp. 485-490. https://doi.org/10.13067/JKIECS.2012.7.3.485
  6. H. Shin, "Design of LED Driving SMPS for Large Traffic Signal Lamp," J. of the Korea Institute of Electronic Communication Sciences, vol. 4, no. 2, 2009, pp. 123-129.
  7. H. Shin, "Development of constant current SMPS for LED Lighting," J. of the Korea Institute of Electronic Communication Sciences, vol. 10, no. 1, 2015, pp. 111-115. https://doi.org/10.13067/JKIECS.2015.10.1.111
  8. X. Hao and C. Kim, "Design and Implementation of LED Lighting Control System Using Arduino Yun and Cloud in IoT," J. of the Korea Institute of Electronic Communication Sciences, vol. 11, no. 10, 2016, pp. 983-988. https://doi.org/10.13067/JKIECS.2016.11.10.983
  9. Y. Han and D. Kim "Sensitivity illumination system using biological signal," J. of the Korea Institute of Electronic Communication Sciences, vol. 9, no. 4, 2014, pp. 499-508. https://doi.org/10.13067/JKIECS.2014.9.4.499
  10. J. Kwon, H. Kim, K. Park, Y. Kim, and G. Hoang "Thermal Charateristics of Designed Heat Sink for 13.5W COB LED Down Light," J. of the Korea Institute of Electronic Communication Sciences. vol. 9, no. 5, 2014, pp. 561-566. https://doi.org/10.13067/JKIECS.201.9.5.561