• Title/Summary/Keyword: W-LED

Search Result 782, Processing Time 0.03 seconds

Design of the Driver of 7W Class LED Lamps as a Substitute for Incandescent Lamps (백열전구 대체용 7w급 LED 램프의 드라이버 설계)

  • Park, Young-San;Bae, Cherl-O
    • Journal of the Korean Society of Marine Environment & Safety
    • /
    • v.16 no.2
    • /
    • pp.235-240
    • /
    • 2010
  • In order to substitute incandescent lamps, a power supply device for 7W class LED lamps which are environmentally friendly and energy saving is designed LED lamps consist of a multitude of chip LED connected in parallel and series. 11ms it is necessary to supply LED lamps with DC voltage and current. However, when LED lamps are in use, they are connected directly to AC 220V. This is why we need to have AC/DC, DC/DC power converters including a control system of voltage and current. For this, a transformerless and simple LED lamp driver is designed 조ich can control the current and output voltage for LED string of LED lamp.

Characteristics of LED Lighting Device Using Heat Sinks of 7.5 W CMP-PLA (7.5 W CMP-PLA 방열판을 적용한 LED 등기구 특성)

  • Kim, Young-Gon
    • Journal of the Korean Institute of Electrical and Electronic Material Engineers
    • /
    • v.26 no.12
    • /
    • pp.920-923
    • /
    • 2013
  • In this paper, the characteristics of a carbon nanotube composite heat sink proposed to replace the advanced Al heat sinks for LED lighting devices were studied. Proposed CMP-PLA heat sink was made by mixing 20~70 wt% carbon nanotube, 20~70 wt% bio-degradable polymer of melt-blended PLA (poly lactic acid) and PBS (poly butylene succinate) and PLA nucleating agents composed of the mixture of soybean oil and biotites, at $150{\sim}220^{\circ}C$ with 1,000~1,500 rpm. Optical and electric characteristics of 7.5 W LED lighting devices using heat sinks with such prepared CMP-PLA were investigated. And, the properties of the heat, which was not released from the CMP-PLA type heat sinks, was also investigated. The color temperature of LED lighting devices using the CMP-PLA heat sinks was 5,956 K, which is x= 0.32 and y= 0.34 in the XY chromaticity, and the color rendering index was 75. The luminous flux and the luminous efficiency of LED lighting devices using the CMP-PLA heat sinks was 540.6 lm and 72.68 lm/W respectively. Measured initial temperature of the heat sinks was $27^{\circ}C$, and their temperature increased as time to be saturated at $52^{\circ}C$ after an hour.

Design of 14[W] LED Module Radiation by using COMSOL (COMSOL을 이용한 14[W]급 LED 모듈 방열 설계)

  • Han, Chul;Eo, Ik-Soo
    • Proceedings of the KIEE Conference
    • /
    • 2009.07a
    • /
    • pp.2243_2244
    • /
    • 2009
  • 본 논문에서는 알루미늄 재질로 된 방열판과 PCB에 1[W]급 LED 14개를 모듈 방열 설계 하여 COMSOL Multiphysics로 시뮬레이션을 통한 결과, 경계면 온도는 약 $80^{\circ}C$, Max.온도$141^{\circ}C$, Min.온도$20^{\circ}C$까지 변화로 실 제작에 근접한 온도 확인이 가능함을 확인 할 수 있었다.

  • PDF

Development of a Very Small LED Lamp with a Low-Thermal-Resistance Lead Frame for an LCD Backlight Unit

  • Yu, Soon-Jae;Kim, Do-Hyung;Choi, Yong-Seok;Kim, Hee-Tae
    • Journal of Information Display
    • /
    • v.10 no.2
    • /
    • pp.49-53
    • /
    • 2009
  • In this study, a very small LED packaging lead frame with a low thermal resistance was developed. The cost of the package process was reduced by the use of many small LED lamps, which increased the light emission efficiency. Compared to the large lead frame lamp, however, the optical property of the small LED packaging lead frame lamp was not sufficiently improved because its reflection structure was changed and its reflection area was reduced. The luminous efficiency of the LED lamp reaches 58 lm/W at the current density of 0.16 A/$cm^2$. Using the LED lamps, 46-inch LCD BLU was manufactured. The BLU-made LED lamps have a low power consumption of 146 W and have a slim (10-mm-thick) BLU, keeping good uniformity in terms of brightness, and maintaining good thermal properties.

Development of a 250-W high-power modular LED fish-attracting lamp by evaluation of its thermal characteristics

  • Lee, Donggil;Lee, Kyounghoon;Pyeon, Yongbeom;Kim, Seonghun;Bae, Jaehyun
    • Journal of the Korean Society of Fisheries and Ocean Technology
    • /
    • v.51 no.2
    • /
    • pp.163-170
    • /
    • 2015
  • Recently LED fish-attracting lamps have been more widely used in fisheries as low-cost and high-efficiency fishing gear, and development of long-life high-efficiency lamps is required through the design of LED packages to optimize heat resistance. This study developed an improved LED fish-attracting lamp with excellent heat performance, which was verified using a numerical model. Heat-resistance design factors such as the heat-radiation fin shape, PCB type, and LED chip count were investigated and optimized. Comparison with a commercial 180-W LED fishing lamp showed that the increase in initial temperature was 40% higher than that of the surrounding LED chip because of design errors in contact thermal resistance. The 250-W LED lamp developed in this study has a characteristic with thermal rising in linearly stable according to the heat source. In addition, luminance efficiency was improved by 20-65% by using flow-visualization simulation. A decrease of 45% in total power consumption with a fuel-cost reduction of over 55% can be expected when using these optimized heat release design factors.

Development of 15W Portable lighting system using solar cell (Solar cell을 이용한 휴대용 15W lighting system 개발)

  • Kim, Jin-Hong;Song, Sang-Bin;Kim, Gi-Hoon;Cheon, Woo-Young
    • Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
    • /
    • 2008.05a
    • /
    • pp.107-112
    • /
    • 2008
  • Solar Cell을 이용한 15W 휴대용 조명 시스템을 개발하기 위하여, 휴대용에 적합한 solar cell을 선정하고, Solar Cell을 충전하기 위한 태양광 궤적 변화에 대한 Simulation을 행하였으며, 1W 백색 LED 6EA를 사용하여 휴대용 LED Lighting System을 개발하였다. LED Lighting System은 solar cell 충방전 회로 및 LED SMPS 구동회로 설계, 글레어차단을 위한 리플렉터 설계, 방열 설계 및 기구 구조 설계를 통하여 개발되었으며, 직접 시제품을 제작하고 그 성능을 측정하였다.

  • PDF

Power Supply for White GaN LED by Using SMD Type Solar Cell Array (SMD 타입 태양전지 어레이를 이용한 white GaN LED용 전원 공급 장치)

  • Kim, Seong-Il;Lee, Yoon-Pyo
    • New & Renewable Energy
    • /
    • v.5 no.4
    • /
    • pp.34-37
    • /
    • 2009
  • Using six SMD(surface mount device) type AlGaAs/GaAs single junction solar cells connected in series, a power source was fabricated for a white GaN LED. The electrical properties of the power source was measured and analyzed under one sun (100mW/$cm^2$) and various indoor light (300 - 900 lux) conditions. Under 600 lux indoor light condition, output power was 17.06 ${\mu}W$ and it was 30.75 ${\mu}W$ under 900 lux indoor light condition. Using the fabricated solar cell power supply, we have turned on the white GaN LED. It was worked well under 15 ${\mu}W$(at 480 lux) power supplied from solar cell array. This kind of solar cell power supply can be used as a power source for ubiquitous sensor network (USN).

  • PDF

Development Trends of LED Lighting Power under 30W (30W 미만 LED 조명용 POWER의 개발 동향)

  • Hong, Young-Gun;Kim, Jun-Hyung;Lim, Won-Chun;Kim, Sung-Cheol;Kim, Ju-Rae
    • Proceedings of the KIPE Conference
    • /
    • 2010.07a
    • /
    • pp.277-278
    • /
    • 2010
  • 조명 부문에 LED가 광원으로 적용되면서 이에 대한 관심이 높아가는 가운데 향후 조명시장은 기존 광원의 대체시장이 될 것으로 예상된다. LED에 대한 광효율 향상이 지속적으로 이루어지고 있고 긴수명 시간과 오염물질이나 유해가스 배출등이 없으며, 수은을 사용하지 않는 광원이기에 중요시 되고 있으며 친환경적인 면에서도 각광을 받고 있다. 이에 본 논문에서는 대체 시장의 중심이 예상되는 30W미만의 LED Power에 대한 경향을 알아본다.

  • PDF

Implementation of a LED light control module using Zigbee (Zigbee를 이용한 LED 조명 제어 모듈 구성)

  • Jang, Young-Ho;Kim, Hwan-Yong
    • Journal of the Korea Academia-Industrial cooperation Society
    • /
    • v.13 no.10
    • /
    • pp.4740-4744
    • /
    • 2012
  • The purpose of this paper was to make a LED light control module using Zigbee. The module was made so that brightness of the LED light changes according to the ambient brightness. A 8-bit microcontroller was used to implement the module to enable LED dimming and wireless light intensity measurement. Using the proposed method, power consumption can be improved by up to 48% on average, with 3.4-0.4W changes in power. The measured ambient light intensity values are converted from analog to digital and outputted as a PWM waveform. According to the output waveform and changes in the current outputted from the LED driver, the brightness of the LED light is controlled. Also, Zigbee with close-range wireless communication capabilities was used to enable wireless transmission of light intensity measurements.