Kim, I.H.;Hancock, J.D.;Hong, J.W.;Cabrera, M.R.;Hines, R.H.;Behnke, K.C.
Asian-Australasian Journal of Animal Sciences
/
제15권6호
/
pp.872-877
/
2002
Two experiments were conducted to determine the effects of reducing particle size of corn from 1,000 to 500 ${\mu}m$ in simple and complex diets for nursery pigs and broiler chicks. In Exp 1., 192 nursery pigs were used in a 24 d growth assay. Treatments were: 1) 1,000 ${\mu}m$ corn in a simple diet; 2) 500 ${\mu}m$ corn in a simple diet; 3) 1,000 ${\mu}m$ corn in a complex diet; and 4) 500 ${\mu}m$ corn in a complex diet. Overall, pigs fed complex diets had 9% greater ADG (p<0.005) and 5% greater gain/feed (p<0.01) compared to pigs fed simple diets. Also, pigs fed the 500 ${\mu}m$ treatments had 3% better overall gain/feed than those fed the 1,000 ${\mu}m$ treatments (p<0.007). At d 9, apparent digestibilities of DM, N and GE were greater for complex diets and diets with smaller particle size (p<0.02). At d 23, there were no differences in nutrient digestibility resulting from diet complexity, but pigs fed diets with corn ground to 500 ${\mu}m$ had greater digestibility of DM (p<0.02) and GE (p<0.003) than pigs fed diets with corn ground to 1,000 ${\mu}m$. A second experiment was designed to determine if four days old broiler chicks were an acceptable model for predicting the effects of feed processing procedures on nursery pigs. Chicks fed complex diets had 3% greater gain/feed than chicks fed simple diets (p<0.001). Rate of gain and feed intake were improved by 3 and 2%, respectively, for chicks fed crumbled diets (p<0.03). However, there were several significant interactions among the main effects. For instance, crumbling did not affect gain/feed in chicks fed complex diets, but rate of gain and feed intake were increased by 7 and 6%, respectively, when simple diets were crumbled (diet complexity${\times}$diet form, p<0.001). Also, gain/feed of chicks was improved by 3% when particle size was reduced in meal diets, but not affected in chicks fed crumbles (diet form${\times}$particle size, p<0.005). Thus, our data suggested that reduction of particle size of corn was important for simple and complex diets and that a complex diet with 1,000 ${\mu}m$ corn gave no better performance than a simple diet with 500 ${\mu}m$ corn.
저속 에너지 도플러 넓어짐 양전자 소멸 분광법으로 $MgB_2$ 박막내의 원자 크기 정도 고체 구조 특성에 대하여 조사하였다. 양전자와 전자의 쌍소멸로 발생하는 511keV 감마선 스펙트럼의 수리적 해석 방법인 S-변수를 사용하여, 상전이 근처 온도에서 박막의 구조 변화를 측정하였다. 비등방성 구조로 된 $MgB_2$ 박막에서 초전도 특성을 갖는 상전이 온도 근처에서 S-변수를 측정하였다. 양전자의 입사 에너지 10keV에서 측정된 S-변수의 최고치는 박막의 온도가 30K에서 0.567이고, 50 K에서는 0.570로 큰 변화는 없었다. 이 결과로부터 양전자가 Boron 층의 초 전자와 소멸하기 보다는 Mg층 근처의 상 전자와 소멸하는 것으로 판단된다. $MgB_2$의 박막의 외층은 Mg층으로 이루어졌다고 할 수 있다.
The most important industrial application of gamma radiation in characterizing green compacts is the determination of the density. Examples are given where this method is applied in manufacturing technical components in powder metallurgy. The requirements imposed by modern quality management systems and operation by the workforce in industrial production are described. The accuracy of measurement achieved with this method is demonstrated and a comparison is given with other test methods to measure the density. The advantages and limitations of gamma ray densitometry are outlined. The gamma ray densitometer measures the attenuation of gamma radiation penetrating the test parts (Fig. 1). As the capability of compacts to absorb this type of radiation depends on their density, the attenuation of gamma radiation can serve as a measure of the density. The volume of the part being tested is defined by the size of the aperture screeniing out the radiation. It is a channel with the cross section of the aperture whose length is the height of the test part. The intensity of the radiation identified by the detector is the quantity used to determine the material density. Gamma ray densitometry can equally be performed on green compacts as well as on sintered components. Neither special preparation of test parts nor skilled personnel is required to perform the measurement; neither liquids nor other harmful substances are involved. When parts are exhibiting local density variations, which is normally the case in powder compaction, sectional densities can be determined in different parts of the sample without cutting it into pieces. The test is non-destructive, i.e. the parts can still be used after the measurement and do not have to be scrapped. The measurement is controlled by a special PC based software. All results are available for further processing by in-house quality documentation and supervision of measurements. Tool setting for multi-level components can be much improved by using this test method. When a densitometer is installed on the press shop floor, it can be operated by the tool setter himself. Then he can return to the press and immediately implement the corrections. Transfer of sample parts to the lab for density testing can be eliminated and results for the correction of tool settings are more readily available. This helps to reduce the time required for tool setting and clearly improves the productivity of powder presses. The range of materials where this method can be successfully applied covers almost the entire periodic system of the elements. It reaches from the light elements such as graphite via light metals (AI, Mg, Li, Ti) and their alloys, ceramics ($AI_20_3$, SiC, Si_3N_4, $Zr0_2$, ...), magnetic materials (hard and soft ferrites, AlNiCo, Nd-Fe-B, ...), metals including iron and alloy steels, Cu, Ni and Co based alloys to refractory and heavy metals (W, Mo, ...) as well as hardmetals. The gamma radiation required for the measurement is generated by radioactive sources which are produced by nuclear technology. These nuclear materials are safely encapsulated in stainless steel capsules so that no radioactive material can escape from the protective shielding container. The gamma ray densitometer is subject to the strict regulations for the use of radioactive materials. The radiation shield is so effective that there is no elevation of the natural radiation level outside the instrument. Personal dosimetry by the operating personnel is not required. Even in case of malfunction, loss of power and incorrect operation, the escape of gamma radiation from the instrument is positively prevented.
This study was performed to investigate the anti-photoaging effects of Persimmon leaf tea(PLT) in hairless mice(SKH-1) exposed to UVB radiation. The animals were divided into non-treated group (normal, N) and UV-radiated groups. UV-radiated groups were divided into only UV-radiated group(control, C) and UV-radiated and PLT treated experimental groups[first extraction treated group(PLT-I), second extraction treated groupe(PLT-II), and third extraction treated group(PLT-III)]. Three PLT treated experimental groups of mice were treated with both oral administration(300mg/Kg B.W./day) and topical application (100 ul of 2% conc./mouse/day) for 4 weeks. Anti-photoaging effects of Persimmon leaf were evaluated by MTT assay, anti oxidative reaction, MMP immunohistochemistry, gelatin zymography assay and RT-PCR observations. Treatment with Persimmon leaf tea(PLT)-I, and -III groups decreased immunohistochemical density of matrix metalloproteinases(MMP)-3 and -9 related to degradation of extracellular matrix in skin. Especially, immunohistochemical density of MMP-2 decreased in PLT-I, -II and -III groups in skin. On the effects of antioxidant function on the treatment with Persimmon leaf tea(PLT), treatment of HaCaT cells with extracts of PLT-I and PLT-II had also significantly reduced intracellular ROS produced by UVB irradiation in a dose dependent manner(PLT-I, p<0.05, p<0.01, p<0.001; PLT-II, p<0.01, p<0.001). Gelatin zymography assay revealed that PLT-II and PLT-III (200 ug/ml) had inhibitory effect on MMP-9 expression in UVB-radiated HaCaT cells. Western blot analysis revealed that PLT-1, -II and -III groups down-regulates the expression of inflammatory associated genes(IL-$1{\beta}$) and PLT-1 and -II groups down-regulates the expression of TNF-${\alpha}$ in a dose dependent manner. Our study suggests that Persimmon leaf tea(PLT) extracts participates in inhibitory effects on the morphological and molecular experiments related to photoaging skin on UVB irradiated hairless mice.
In candidates for aortic valve replacement [AVR]it is our primary intention to implant the largest possible vale prosthesis of at least 23 mm in diameter in patients with severe valvular aortic stenosis. However, in many patients there is an additional subvalvular asymmetric septal hypertrophy which in some cases may cause an postextrasystolic increase of the LV-aortic gradient. Another component of the aortic stenosis syndrome is a narrow valvular ring, or a combination of both. After complete removal of the diseased valve and decalcification the narrow aortic ring [< 23 mm] can be widened firstly by transaortic subvalvular septal myectomy- [TSM] thus unfolding the left ventricular outflow tract[LVOT]and secondly by extending the oblique aortic incision into the aortic valve ring or further down into the anterior leaflet of the mitral valve. The sub-and supra-valvular defect will be closed by patch enlargement of the aortic root [PEAR] using autologous pericardium. These techniques allow a considerable enlargement of the valvular ring of about 4 to 10 mm in circumference. In a retrospective study using a computerized program, 847 patients with AVR [1980-1984]were reviewed to evaluate the intraoperative hemodynamic results mainly concerning relief of the transvalvular gradient. In 626 patients AVR was performed, 151 patients had double valve replacement [AVR+MVR], and 70 patients had AVR plus additional surgical procedures. Concentrating on the AVR-group [n=626] there were 103 patients with TSM, 24 patients with PEAR and 20 patients with TSM+PEAR which demonstrated that in a total, of 147 patients of this groups [23.5%] an additional procedure was necessary. The Statistical evaluation of the intraoperative pressure measurements before and after AVR in relation to the size of the implanted prostheses indicated the lowest preoperative mean gradient in patients with AVR alone, the highest in patients who afforded TSM plus PEAR. However, after AVR the mean gradients in all three groups were very low [mean 5 to 10 mmHg]. These data indicate that in patients with a narrow aortic ring and additional considerable ASH, TSM and PEAR are suitable techniques to enlarge the aortic root to enable the implantation of an adequate aortic valve prosthesis. Long-term controls have shown that autologous pericardium is a qualified graft material for the ascending aorta.
The first part is about development of a liquid target for a neutron source, which is designed to overcome many of the limitations of traditional beam-target neutron generators by utilizing a liquid target neutron source. One of the most critical aspects of the beam-target neutron generator is the target integrity under the beam exposure. A liquid target can be a good solution to overcome damage to the target such as target erosion and depletion of hydrogen isotopes in the active layer, especially for the one operating at high neutron fluxes with no need for water cooling. There is no inherent target lifetime for the liquid target neutron generator when used with continuous refreshment of the target surface exposed to the energetic beam. In this work, liquid target containing hydrogen has been developed and tested in vacuum environment. Potentially, liquid targets could allow a point neutron source whose spatial extension is on the order of 1 to $10{\mu}m$. And the second is about the vacuum ultraviolet (VUV) spectrometer which is designed as a five-channel spectral system for ITER main plasma measurement. To develop and verify the design, a two-channel prototype system was fabricated with No. 3 (14.4 nm~31.8 nm) and No. 4 (29.0 nm~60.0 nm) among the five channels. For test of the prototype system, a hollow cathode lamp is used as a light source. The system is composed of a collimating mirror to collect the light from source to slit, and two holographic diffraction gratings with toroidal geometry to diffract and also to collimate the light from the common slit to detectors. The two gratings are positioned at different optical distances and heights as designed. To study the appropriate detector for ITER VUV system, two different electronic detectors of the back-illuminated charge coupled device and the micro-channel plate electron multiplier were installed and the performance has been investigated and compared in the same experimental conditions. The overall system performance was verified by measuring the spectrums.
지형형태학적 순간단위도(GIUH)는 미계측유역이나 관측자료가 충분하지 않은 유역의 적용을 목적으로 한다. 이를 위해서는 GIUH의 동역학적 매개변수인 특성속도의 정도 있는 추정이 가장 중요한 요소이나 아직까지 그에 대한 정확한 산정방법은 개발되어 있지 못한 실정이다. 실측된 강우 유출자료가 존재할 경우, 특성속도의 추정은 상대적으로 용이하나. GIUH의 목적에 맞지 않는다. 이 미계측 유역에 대한 유출 해석임을 상기한다면 특성속도 역시 지형형태학적인 해석을 바탕으로 산정되어야 하고, 그와 더불어 실제 적용에 합리적이며 간편한 식의 구조로 표현되어야 한다. 이에 본 연구에서는 GIUH 이론을 위천의 고노, 통곡, 효령 유역에 적용하고, 실측 자료를 근거로 한 최적화 과정을 통하여 특성속도를 산정하였다. 그렇게 구한 특성속도는 GcIUH 및 기타 집중시간에 관한 경험공식과의 비교를 통해 가장 적절한 방법을 선정할 수 있도록 하였다. 비교 결과 Kerby, 김남원, Kinematic Wave, Brasby-Williams 공식 등이 비교적 실측치와 근사한 값을 주는 것으로 조사되었으나, Kerby, Kinematic Wave 공식 등의 경우 조도계수 n값이 다소 주관적으로 추정될 수 있으며, 또한 특성속도가 이들 계수에 따라 크게 변화하는 단점이 있는 것으로 나타났다. 따라서, 비교적 정확하고도 객관적인 값을 주는 김남원 및 Brasby-Williams공식을 유역의 특성속도 산정공식으로 제시할 수 있을 것으로 보인다.
본 연구는 돼지의 일령별 체중자료를 이용한 개체별 체중 성장곡선 추정을 통해 성장 특성을 조사하고 육질 형질과의 상관 관계를 규명하고자 실시하였다. 축산연구소의 재래돼지와 랜드레이스를 기초축으로 조성한 F2집단 253두를 대상으로 일령별 체중기록과 육질 형질을 측정하여 개체별 성장곡선 모수와 성장 특성치를 추정하고 등지방 두께, 조지방 함량, 지방율 및 전단력과 성장곡선 모수간의 표현형 상관관계를 추정하였다. 대부분의 성장 특성치들은 기존 연구에서 제시된 재래돼지와 랜드레이스순종의 중간정도 능력을 나타내었으며, 상관관계의 추정 결과 조숙성의 개체일수록 성숙체중이 작았으며 만숙성인 개체일수록 지속적인 성장률의 증가로 인해 변곡점이 나타나는 월령이 늦어지며 최대 증체율이 커지는 것으로 나타났다. 성장곡선 모수와 육질형질 측정치들간의 상관 관계는 암수간에 일부에서 다소 상반되는 방향으로 추정되었으며 특히 전단력의 경우 모든 성장 특정치들과의 관계가 반대로 추정되었다. 최대 증체율과 등지방 두께 및 조지방 함량과의 상관은 비교적 높은 정의 상관정도를 보여 최대 증체율이 클수록 등지방 두께와 조지방 함량이 높아지는 것으로 나타났다.
The morphological study on different types of cells of reproductive organ including spermatogenesis in the adult planaria was performed to observe their cytochemical and ultrastructural characteristics. 1. Spermatogenesis The circular luminated material appears immediately inside the nuclear envelope of early spermatid and is found also in the nucleus of sperm, but typical acrosomal structures cannot be observed. Approximately ten of small-sized mitochondria occur around the nucleus in the transitional phase from primary spermatocyte to secondary spermatocyte, but in sperm a long mitochondrion is closely associated with nucleus, parellel to long axis of it. The sperm has a relatively long head connected with two tails via hollow neck. 2. Reproductive organ The penis bulb and the bursa stalk were observed. (1) Penis bulb The cells constituted penis bulb are classified into six types on the basis of ultrastructure of the cells and cytochemistry of the cytoplasmic granules. 1) A-type cells: These cells exhibiting low electron density are mainly occupied by large nucleus. These cells possess two different types of granules: highly electron-dense round granules with an average size of $0.9{\mu}m$, and electron-dense granules exhibit PAS-positive reaction. 2) B-type cells contain PAS-positive granules with the size of about $0.4{\mu}m$. They are rich in free ribosomes and mitochondria. 3) C-type cells are found to be dark cells due to high electron-density. These cells are largely occupied by large nucleus. 4) D-type cells: These cells are seen as light cells which have poorly developed cell organelles. 5) E-type tells: These cells contain a large number of glycogen granules which occupy most of cell. 6) F-type cells: These arc parietal epidermal cells surrounding the genital antrum. These cells are characterized by their finger-like shapes and the presence of a number of electron-dense, irregularly-shaped structures inside cells. The relatively large electron-lucent granules can be also found. The F-type cells possess numerous microvilli on their free surfaces. (2) Bursa stalk The cells constituted bursa stalk are classified into 3 types on the basis of cell shapes and presences of electron-dense or electron-lucent granules. 7) G-type cells with a long cytoplasmic process. They have large nuclei and poorly developed cell organelles. 8) H-type cells: These cells are characterized by the presence of a long cytoplasmic process and relatively highly electron-dense cytoplasmic profile. They have poorly developed cell organelles. 9) I-type cells contain large electron-lucent granules which exhibit negative reactions with three kinds of cytochemical staining methods used in this experiment. The fine electron-dense structures can be found inside these granules.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.