• Title/Summary/Keyword: W/C

Search Result 15,606, Processing Time 0.044 seconds

Analysis of Signal Properties in accordance with electrode area of x-ray conversion material (X선 검출 물질의 전극 면적에 따른 신호특성 분석)

  • Jeon, S.P.;Kim, S.H.;CHO, K.S.;Jung, S.H.;Park, J.K.;Kang, S.S.;Han, Y.H.;Kim, K.S.;Mun, C.W.;Nam, S.H.
    • Journal of the Korean Society of Radiology
    • /
    • v.4 no.1
    • /
    • pp.5-9
    • /
    • 2010
  • In recent, a digital x-ray detector attracted worldwide attention and there are many studies to commercialize. There are two methods in digital x-ray detector. This method is an Indirect method and Direct method. This study is to see the differences between the digital x-ray detector based on a-Se used in the existing indirect conversion method and an x-ray conversion material that has better SNR(Signal-to-noise ratio) and property than the a-Se. To solve the problem that is difficult to make a large area film using Screen-Print method, we used a Screen-Print method. In this study, we used a polyclystal $HgI_2$ as x-ray conversion material and a sample thickness is $150{\mu}m$ and an area is $3cm{\times}3cm$. ITO(Indium-Tin-Oxide) electrode was used as top electrode using a Magnetron Sputtering System and each area is $3cm{\times}3cm$, $2cm{\times}2cm$ and $1cm{\times}1cm$ and then we evaluated darkcurrent, sensitivity and SNR of the $HgI_2$ film are measured, then we evaluated the electrical properties. And we used a current integration mode when I-V test. This experiment shows that the sensitivity increases in accordance with the area of the electrode but the SNR is decreased because of the high darkcurrent. Through fabricating of various thicknesses and optimal electrodes, we will optimize SNR in the future work.

Temporal and spatial distributions of heat fluxes in the East Sea(Sea of Japan) (東海熱收支 의 時.空間的인 分布)

  • 박원선;오임상
    • 한국해양학회지
    • /
    • v.30 no.2
    • /
    • pp.91-115
    • /
    • 1995
  • Air-sea heat fluxes in the East Sea were estimated from the various ship's data observed from 1961 to 1990 and the JMA buoy #6 data from 1976 to 1985. The oceanic heat transport in the sea was also determined from the fluxes above and the heat storage rate of the upper layer of 200m from the sea surface. In winter, The incoming solar radiation is almost balanced with the outgoing longwave radiation. but the sea loses her heat through the sea surface mainly due to the latent and sensible heat fluxes. The spatial variation of the net surface heat flux is about 100 Wm/SUP -2/, and the maximum loss of heat is occurred near the Tsugaru Strait. There are also lots of heat losses in the southern part of the East Sea, Korea Strait and Ulleung Basin. Particularly, the heat strong loss in the south-western part of the sea might be concerned with the formation of her Intermediate Homogeneous Water. In summer, the sea is heated up to about 120∼140 Wm/SUP -2/ sue to strong incoming solar radiation and weak turbulent heat fluxes and her spatial variation is only about 20 Wm/SUP -2/. The oceanic heat flux is positive in the southeasten part f the sea and the magnitude of the flux is larger than that of the net surface heat flux. This shows the importance of the area. In the southwestern part of the sea, however, the oceanic heat flux is negative. This fact implies cold water inflow, the North Korean Cold Water. The sigh of net surface heat flux is changed from negative to positive in March and from positive to negative in September. The heat content in the upper surface 200 m from the sea surface reaches its minimum in March and maximum in October. The annual variation of the net surface heat flux is 580 Wm/SUP -2/ in southwestern part of the sea. The annual mean values of net surface heat fluxes are negative, which mean the net heat transfer from the sea to the atmosphere. The magnitude of the flux is about 130 Wm/SUP -2/ near the Tsugaru Strait. The net surface fluxes in the Korea Strait and the Ulleung Basin are relatively larger than those of the rest areas. The spatial mean values of surface heat fluxes from 35$^{\circ}C$ to 39$^{\circ}$N are 129, -90, -58, and -32 Wm/SUP -2/ for the incoming solar radiation, latent hear flux, outgoing longwave radiation, and sensible heat flux, respectively.

  • PDF

Physico-chemical Meat Quality Properties and Nutritional Composition of Hanwoo Steer Beef with 1++ Quality Grade (1++ 등급 거세한우의 부위별 이화학적 육질특성 및 영양성분조성)

  • Cho, S.H.;Kim, J.H.;Seong, P.N.;Cho, Y.M.;Chung, W.T.;Park, B.Y.;Chung, M.O.;Kim, D.H.;Lee, J.M.;Ahn, C.N.
    • Food Science of Animal Resources
    • /
    • v.28 no.4
    • /
    • pp.422-430
    • /
    • 2008
  • This study was conducted to investigate the nutritional composition and meat quality properties of Hanwoo steer beef by different cut. Ten cuts [Abjin (short plate), Bosup (top sirloin), Cheggt (striploin), Dngsim (loin), Guri (chuck tender), Hongduke (eye of round), Moksim (chuck roll), Sulgit (bottom round), Udoon (top round), Yanaji (brisket)] prepared from 10 Hanwoo steers (28-30 months old) were used for this experiment. The range of pH was 5.46-5.64. In the chemical analysis, Hongduke contained highest protein contents (21.15%) and Dngsim had lowest protein contents (16.94%) (p<0.05). Fat contents were higher in Dngsim whereas those of Guri, Hongduke and Udoon were significantly lower when compared to the other cuts (p<0.05). There were not significantly different in meat color (L, a and b values) properties only except that L values were significantly higher in Dngsim among 10 cuts (p<0.05). Cooking loss (%) was higher in Guri, Hongduke, Udoon and Yangji whereas it was significantly love. in Cheggt (p<0.05). Warner-Bratzler shear force (WBS) was significantly higher in Abjin $(6.24inch^2/kg)$, whereas Dngsim $(3.45inch^2/kg)$ and Cheggt $(3.50inch^2/kg)$ were significantly lower than the other cuts (p<0.05). There was no significant difference in water-holding capacity (WHC) among 10 cuts (p>0.05). Total amino acid contents were significantly higher in Hongduke (p<0.05). Hongduke was highest in most kinds of amino acids, however, Udoon had the highest methionine and histidine contents among 10 cuts (p<0.05). Glutamate contents were high in all cuts and followed by aspartate, leucine and lysin. With regard to mineral contents, Ca was ranged from 47.63-70.69 mg/kg and Fe was ranged from 15.09-26.68 mg/kg in 10 cuts. Zn was highly contained in Guri (50.56 mg/kg) when compared to the other cuts (p<0.05).

Effect of Jehotang Extract on the Growth of Intestinal Bacteria and Immunostimulation (제호탕의 장내 세균 및 면역 활성에 미치는 연구)

  • Ji, Myoung-Soon;Park, Min-Jung;Lee, Mi-Young;Kim, Jong-Goon;Ko, Byoung-Seob
    • Korean Journal of Food Science and Technology
    • /
    • v.38 no.1
    • /
    • pp.104-108
    • /
    • 2006
  • Water extracts of Jehotang were evaluated for their growth-promoting effects on Bifidobacterium longum, Lactobacillus sp., L. acidophilus, and Clostridium perfringens. Addition of Jehotang water extract to modified EG media at 0.1 mg/mL increased growths of B. longum, Lactobacillus sp., and L. acidophilus, with 1.8-fold increase in growth of L. acidophilus compared to that of control. Studies on these strains by agar diffusion method showed Lactobacillus sp. and L. acidophilus were activated by addition of Jehotang extract at 10 mg/disc. Proliferation responses of mice splenocytes and Peyer's patch cells to ConA by LPS-stimulation at 500 mg/kg B.W./day Jehotang extract were investigated in vitro. Upon treatment of 1 mg/mL Jehotang water extract to mice, proliferations of splenocytes and Peyer's patch cells increased 1.4- and 1.6-fold compared to control, respectively. In mice administered Jehotang extract, production of intestinal secretory IgA (sIgA) increased 2.4-fold compared to control. These results indicate water extract of Jehotang stimulated intestinal immune system of mice. In mice treated with Jehotang extract, production of lymphocytes was 4% lower, whereas those of granulocytes and platelets were 4% and slightly higher than control, respectively.

Effect of Antler Velvet Ethanol Extract on Common Serum Chemistry Panels and Histopathological Change in Rats Exposed to 2,3,7,8-Tetrachlorodibenzo-p-dioxin (녹용 에탄올 추출물이 2,3,7,8 Tetrachlorodibenzo-p-dioxin에 노출된 랫드의 일반 혈액 화학 지수 및 조직 병변에 미치는 효과)

  • Choi, Kyung-Yun;Hwang, Seock-Yeon;Lee, Su-Chan;Kim, Si-Kwan
    • Journal of the Korean Society of Food Science and Nutrition
    • /
    • v.35 no.9
    • /
    • pp.1178-1184
    • /
    • 2006
  • This study was carried out to investigate the effect of ethanol extract of antler velvet (EAV) on common serum chemistry panels and histopathological change in rats exposed to 2,3,7,8-tetrachlorodibenzo-p-dioxin (TCDD). Administration of TCDD ($50{\mu}g/kg$ body weight) induced significant decrease in platelet count (p<0.01), creatine phosphokinase (CPK, p<0.01), lactatate dehydrogenase (LDH, p<0.05) and glucose (p<0.05) levels and increase in hemoglobin (p<0.05), aspartate aminotransferase (AST, p<0.01), alanine amino transferase (ALT, p<0.05) and lipase activities (p<0.05), and blood urea nitrogen (BUN, p<0.05), triglyceride (p<0.01) and low density lipoptotein cholesterol (LDL-C, p<0.05) levels. However, pretreatment of EAV at daily dose of 20 mg/kg b.w. from 1 wk before TCDD exposure for 5 wks attenuated the abnormality of the overall serum chemistry panels but statistical difference between TE and TA groups was observed only in testicular weight (p<0.01), LDH activity (p<0.05), glucose (p<0.05) and lipase activity (p<0.01). In addition, TCDD induced significant histopathological changes including swelling, fatty metamorphosis, and vacuolar degeneration in liver; edema in proximal and distal convoluted tubules, and glomerulus in kidney; severe atrophy of red purple and appearance of significant number of macrophage in spleen; prominent atrophy and decrease in immune cells in thymus. On the other hand, administration of EAV attenuated histopathological damage induced by TCDD. These results further suggest that administration of EAV attenuates TCDD induced testicular, liver, pancreatic, hematopoietic and nephrotic toxicities in rats.

A re-appraisal of scoring items in state assessment of NATM tunnel considering influencing factors causing longitudinal cracks (종방향균열 영향인자 분석을 통한 NATM터널 정밀안전진단 상태평가 항목의 재검토)

  • Choo, Jin-Ho;Yoo, Chang-Kyoon;Oh, Young-Chul;Lee, In-Mo
    • Journal of Korean Tunnelling and Underground Space Association
    • /
    • v.21 no.4
    • /
    • pp.479-499
    • /
    • 2019
  • State assessment of an operational tunnel is usually done by performing visual inspection and durability tests by following the detailed guideline for safety inspection (SI) and/ or precision inspection for safety and diagnosis (PISD). In this study, 12 NATM tunnels, which have been operational for more than 10 years, were inspected to figure out the cause of longitudinal cracks for the purpose of modifying the scoring items in the state assessment NATM tunnel related to the longitudinal crack and the thickness of concrete lining. All investigated tunnels were classified into four groups depending on the shape and usage of each tunnel. The causes of longitudinal crack occurrence were analyzed by investigating the correlations between the longitudinal crack and the following four factors: the patterns of ground excavation; construction state of primary support system; characteristics of material properties of the concrete lining; and thickness of lining which was obtained by Ground Penetration Radar (GPR) tests. It was found that influencing factors causing longitudinal cracks in the lining were closely related with the construction condition of the primary support system, i.e. shotcrete, rockbolt, and steel-rib; crack occurrences were not much affected by the excavation patterns. As for the properties of concrete lining materials, occurrence of the longitudinal crack was mostly affected by the following three items: w/c ratio; contents of cement; and strength of lining. When estimating the lining thickness of the concrete lining by GPR tests and taking thickness effect into account in the statement assessment, it was concluded that increase of the index score by an average of 0.03 (ranging from 0.01 up to 0.071) is needed; a more realistic way of state assessment should be proposed in which the increased index score caused by lack of lining thickness should be taken into account.

Suitability of Migration Testing for Food Packaging Materials Using Tenax® (Tenax®를 이용한 식품포장재의 용출 실험의 적합성)

  • Kim, Hyeong-Jun;Bang, Dae Young;Kim, Min Ho;Lee, Keun Taik
    • KOREAN JOURNAL OF PACKAGING SCIENCE & TECHNOLOGY
    • /
    • v.24 no.3
    • /
    • pp.97-106
    • /
    • 2018
  • This study aimed at examining the suitability of $Tenax^{(R)}$ for the migration testing of food packaging materials, which is currently approved in the EU as a dry food simulant. The results are used as a basis to examine the feasibility of introducing $Tenax^{(R)}$ to Korean regulation. The OMVs of test specimen into various solvents (diethyl ether, ethanol, pentane, and acetone) after exposure to $100^{\circ}C$ for 1 hr were compared. Diethyl ether showed the highest OMV ($1.33mg/dm^2$) among the solvents tested. When the tests were conducted with different amounts of $Tenax^{(R)}$ of 2, 4, or 8 g per specimen, the OMVs were 0.75, 1.33 and $1.40mg/dm^2$, respectively. The OMV obtained with a closed system after wrapping with aluminum foil showed a significantly higher OMV ($1.61mg/dm^2$) than that without aluminum wrapping ($1.318mg/dm^2w$) and an open system without lid ($1.06mg/dm^2$). The specific migration rates of surrogates spiked in the polyethylene test film and paper samples into $Tenax^{(R)}$ were compared with those into liquid food simulants including 95% ethanol and n-heptane, and actual foods such as starch, skim milk, and sugar. In general, the specific migration levels of surrogates into $Tenax^{(R)}$ were similar compared with n-heptane, however those were significantly higher than into actual foods. These results suggest that $Tenax^{(R)}$ may be used as a food simulant for the long-term preservation of dried foods and paper products. However, more studies need to be conducted to investigate the factors influencing the migration into $Tenax^{(R)}$, such as the types of foods and packaging materials tested, migration conditions, and surrogates properties etc.

Study on Characteristic of Pyropia Dentata Three Cultivar in Haenam Aquafarm, Jellanam-do (전남 해남에서 잇바디돌김 3종의 양식 특성 연구)

  • Han, M.K.;Jeong, D.S.;Kim, C.W.;Choi, S.J.
    • Journal of Practical Agriculture & Fisheries Research
    • /
    • v.23 no.2
    • /
    • pp.43-50
    • /
    • 2021
  • Growth tests on the Yuldo, Supum1 and Supum2 cultivars of Pyropia dentata were performed at the Eoran and Imha aquafarm, Haenam in Jeollanamdo, from October to December in 2017. The mean water temperature ranged from 5.4 to 26.4 ℃. In Eoran aquafarm (flating raft method), dissolved total nitrogen (DTN), dissolved total phosphorus (DTP), total nitrogen (TN), total phosphorus (TP) and chemical oxygen demand (COD) ranged from 0.091 to 0.181 mg/L, 0.007 to 0.019 mg/L, 0.114 to 0.187 mg/L, 0.008 to 0.033 mg/L and 0.200 to1.000 mg/L, respectively. In Imha aquafarm (fixed pold method), DTN, DTP, TN, TP and COD ranged from 0.118 to 0.276 mg/L, 0.005 to 0.024 mg/L, 0.155 to 0.305 mg/L, 0.009 to 0.042 mg/L and 0.300 to1.400 mg/L, respectively. In order to investigate the number of conchospores attached on the Pyropia net, which was cut into about 4cm long. The mean number of conchospores of Yuldo, Supum1 and Supum2 cultivars were 39.5, 26.5, 72.5, respectively. Young thalli were harvested two times at Eoran aquafarm, and three times at Imha aquafarm. In eoran aquafarm, the mean thallus length of Yuldo, Supum1 and Supum2 cultivars were 49.9, 46.0, 42.0 cm on October and 163, 126.0, 263.0 cm on November, respectively. The mean thallus width of Yuldo, Supum1 and Supum2 cultivars were 5.8, 4.6, 11.5 cm on October and 20.9, 11.5, 14.0 cm on November, respectively. In Imha aquafarm, the mean thallus length of Yuldo, Supum1 and Supum2 cultivars were 119.0, 60.9, 71.0 cm on October, 196.0, 132.0, 262.0 cm on November and 187.0, 281.0, 296.0 cm on December, respectively. The mean thallus width of Yuldo, Supum1 and Supum2 cultivars were 4.2, 3.4, 3.1 cm on October, 8.9, 6.2, 6.6 cm on November and 11.7, 11.6, 9.4 cm on December, respectively. In eoran aquafarm, contents of moisture, crude ash, crude lipid, crude protein and carbohydrate of three cultivars ranged from 11.64 to 20.15, 19.54 to 21.19, 0.00 to 0.18, 29.78 to 37.81, 29.16 to 29.71, respectively. In Imha aquafarm, contents of moisture, crude ash, crude lipid, crude protein and carbohydrate of three cultivars ranged from 8.43 to 9.15, 11.42 to 17.49, 0.00 to 0.00, 31.90 to 37.54, 36.30 to 42.24, respectively.

Studies on the Flowering and Maturity in Sesame 1. Flowering Habit by Different Plant Types (참깨 개화, 등숙에 관한 연구 -제 1 보 참깨 초형에 따른 개화특성에 관한 연구-)

  • Lee, J.I.;Kang, C.W.;Lee, S.T.;Son, E.R.
    • KOREAN JOURNAL OF CROP SCIENCE
    • /
    • v.29 no.1
    • /
    • pp.76-83
    • /
    • 1984
  • This experiment was performed to investigate the flowering habit of sesame (Sesamum indicum L.). Sesame varieties tested could be classified into 8 different plant types by their morphological traits such as capsule shape, capsule setting habit and branching types among sesame gene pool of Crop Experiment Station, ORD. The first flower was appeared at the lowest node on main stem. Flowers were appeared progressively toward the tip of the main stem and also toward the tips of branches. The interval of flowering for a node was about one day, but 3 to 8 days for the flowers on the tips. Side flowers started at 4 to 5 nodes lower than those of center flower at the same day. Flowers were beared 2 by 1 node on the middle part of flower setting node (7-9) in mono capsule setting habit in spite of its normal is 1 by 1 node on the other nodes. Flowers were beared opposite direction on each node of stem and flowering toward the tip of main stem composed of cross shape between nodes and spiral, reverse of clockwise direction. We called this habit as cross spiral flowering order and cross spiral phyllotaxis. The first flower on branches was appeared when center flower on the 5th node of main stem began to flower. The branches produced at higher nodes on main stem showed larger flowering periods and more number of flowers than that at lower parts. BTB (Branch, Tricapsule, Bicarpels, 4 Loculi) type showed three capsule setting habits and same flowering period both on main stem and branches while BTQ (Branch, Tricapsule, Quadricarpels, 8 Loculi) type showed three capsule setting habit on main stem and mono-capsule setting habit on branches. In BTQ type, the period of flowering was much shorter on branches than on main stem. Branching type was considered more promising than non branching type for the breeding of early maturing high yielding variety because branching type has the advantage of bearing a lot of flowers in comparatively short flowering period.

  • PDF

The Effects of Various Fat Source Feeding on Growth Performance, Carcass Characteristics, Fecal Microflora and Blood Profiles in Broilers (다양한 지방원의 급여가 육계의 생산성, 도체특성, 분내 미생물 조성 및 혈액특성에 미치는 영향)

  • Cho, J.H.;Kwak, Y.C.;Lee, J.H.;Nho, W.G.;Kim, I.H
    • Journal of Practical Agriculture & Fisheries Research
    • /
    • v.16 no.1
    • /
    • pp.93-103
    • /
    • 2014
  • This experiment was conducted to investigate the effects of different fat source feeding on growth performance, visceral organ weight, meat color, excreta microflora and blood profiles in broilers. A total of 768 1-d-old ROSS 308 broilers (mixed gender) with an initial average body weight of 39.68 ± 0.14 g were randomly allotted to 4 treatments with 12 replicate pens per treatment and 16 broilers per pen for 32 days. Dietary treatments were: 1) SBO, basal diet + 5% soybean oil, 2) PF, basal diet + 5% poultry fat, 3) TAL, basal diet + 5% tallow, and 4) LARD, basal diet + 5% lard. During d 1 to 14, broilers fed TAL diet had a higher (P<0.05) body weight gain (BWG) than broilers fed with PF and LARD diets, moreover, broilers fed TAL diet had a higher (P<0.05) feed intake than broilers fed SBO, PF and LARD diets. Overall (d 0-32), BWG in SBO and TAL treatments was greater (P<0.05) than that in LARD treatment. The meat color a* (redness) of broilers fed with LARD diet was increased (P<0.05) compared with broilers fed with PF and TAL diets. No difference was observed in visceral organ weight of liver, spleen, bursa of Fabricius, breast muscle, abdominal fat, gizzard and excreta concentrations of Lactobacillus and Escherichia coli. The blood LDL cholesterol concentration in TAL treatment was higher (P<0.05) than that in LARD treatment. In conclusion, broilers supplementation with tallow could improve not only the body weight gain and feed intake but also blood LDL cholesterol concentration. Moreover, broiler fed lard could increase a* (radness) of meat color, while the soybean oil supplementation improve body weight gain in broilers.