• Korean Journal of Soil Science and Fertilizer
• /
• v.43 no.6
• /
• pp.852-857
• /
• 2010

This study was performed to explore the effect of the clay mineral illite on the improvement of bed soil and plant growth. Red pepper (Capsicum annuum L.) was used as a model vegetable crop. The experiment was performed during the whole six weeks in the glass house of the Chungbuk National University. Its seedlings were cultivated in the bed soil normally used for horticultural purpose. Of the seedlings cultured, the healthy and regular size of seed were selected and cultivated in the pots. They were treated with two forms of illite, particulate (PA) and powder (PW), at the following application rates: standard application[P1 (PA1, PW1), 1:20 (w/w)], two times[P2 (PA2, PW2), 1:10 (w/w)], and four times[P4 (PA4, PW4), 1:5 (w/w)] of standard application. Untreatment (P0) was used as a control pot. At six weeks of cultivation, their growth lengths were correspondingly increased as the application rate was increased ranging from P0, P1, P2, and to P4. Their growth length was a little greater on the application of powder illite (PW) than on the particulate illite (PA). Based on the plant analysis for the root, leaf, stem of red pepper, the uptake amounts of K, Ca, and Mg, were correspondingly increased, as the application rate was increased ranging from P0, P1, P2, and to P4, respectively. At the same application rate, their amounts taken up in the respective parts were higher on the application of PW illite than on the PA one. Especially the amounts of Ca and Mg were higher in the stem, leaf than root. Consequently, it appears that the illite treatment, especially, PW form of illite, enhance the growth of red pepper in the glass house during the whole six weeks of experiment.

• Asian-Australasian Journal of Animal Sciences
• /
• v.23 no.10
• /
• pp.1354-1363
• /
• 2010

This study compared the effect of four different feeding methods for gestating gilts on reproductive performance and growth of their progeny. A total of 40 F1 primiparous sows (Yorkshire${\times}$Landrace) were allotted to four treatments in a completely randomized design (CRD). For treatments, gestating period of sows was divided into three trimesters (0-35 d, 36-90 d and 91-110 d) and different amounts of feed were provided to each treatment group by Flat, Down-Up-Down (DUD), Up-Down-Up (UDU) and Down-Up-Up (DUU) feeding methods. The experimental diet was formulated to meet or exceed the standards of NRC (1998). Body weight gain of gestating gilts from d 0 to 110 was affected by feeding method (p<0.05). When gilts were fed constant feed ration (Flat feeding), less body weight loss was observed during lactation (-0.9 kg, p<0.05) and desirable backfat thickness (average 19.5 mm) was acquired at 110 days of gestation. Feed intake of lactating sows tended to be greater (4.22, 3.60, 3.97 and 4.13 kg/d, p>0.05) as sows in Flat feeding treatment had lower backfat thickness during gestation compared with other treatments (p<0.05). When gestating gilts were fed higher amount of feed during mid-trimester, the number of stillborn (1.4 piglet per litter, p<0.05) and mummies (0.8 piglet per litter, p = 0.25) were increased compared to other treatments. Feeding methods for gestating gilts had no effect on litter weight and gain of litter weight during the nursing period. Flat feeding method resulted in decreased plasma glucose concentration at 7 d postpartum (p<0.05), and increased LH concentration at 21 d postpartum (p<0.01) compared to other treatments. These results suggested that higher feed intake of gestating gilts resulted in detrimental effects on body condition and reproductive performance of sows. When gestating gilts consumed constant feed during gestation (2 kg/d), better reproductive performance and less body weight loss in lactation were observed because sows consumed more feed during the whole lactation period. Consequently, Flat feeding will be a desirable feeding strategy for gestating gilts to maximize reproductive performance, and better body condition of sows without any negative influence on the growth of their progeny.

• Korean Journal of Agricultural Science
• /
• v.21 no.2
• /
• pp.103-110
• /
• 1994

Since the supply of the Southeast Asian tropical timber decreases and its price steeply increases in the international lumber market, door and window frame manufacturers in this country are eagerly searching for their substitutes. This is the first step to replace Southeast Asian tropical timber by low grade North American softwoods, whose reliable and steady supply is expected, but their appearances are not as good as the tropical timber. In this study, knot distribution on the softwood boards and their warp were examined The yield and production cost were also calculated. The average numbers of knots on a door frame were 7.2 for Douglas-fir and 3.4 for Western hemlock. Only 11% of the knots of Douglas-fir door frames are larger than 5cm in diameter, while are 35% of the knots of Western hemlock. The deformations of door frames, after 2 months air-drying, were measured with a warp table. The deformations of Western hemlock door frames were mostly less than 6mm, while those of Douglas-fir distributed in the range of 0.5 and 9.5mm. The yield of Western hemlock is higher than that of Douglas-fir. It can be concluded that the door frames made of the softwoods are compatible with those made of the tropical timber in most aspects except appearance.

• Transactions on Electrical and Electronic Materials
• /
• v.10 no.2
• /
• pp.58-61
• /
• 2009

The electrical stability of ZnO: Al thin films deposited on glass substrate by the RF magnetron sputtering method have been modified by a hydrogen annealing treatment and $SiO_2$ protection layer. AZO thin films were deposited at room temperature and different RF powers of 50, 100, 150, and 200 W to optimize the AZO film growth condition. The lowest value of resistivity of $9.44{\times}10^{-4}{\Omega}cm$ was obtained at 2 mtorr, room temperature, and a power level of 150 W. Then, the AZO thin films were annealed at $250-400^{\circ}C$ for 1 h in hydrogen ambient. The minimum resistivity obtained was $8.32{\times}10^{-4}{\Omega}cm$ as-annealed at $300^{\circ}C$. The electrical properties were enhanced by the hydrogen annealing treatment. After a 72 h damp-heat treatment in harsh conditions of a water steam at $110^{\circ}C$ for four representative samples, a degradation of electrical properties was observed. The sample of hydrogen-annealed AZO thin films with $SiO_2$ protection layer showed a slight degradation ratio(17%) of electrical properties and a preferable transmittance of 90%. The electrical stability of AZO thin films had been modified by hydrogen annealing treatment and $SiO_2$ protection layer.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.18 no.3
• /
• pp.101-110
• /
• 2018

In order to The certification of CMMI level is positioned as the most important part of software development company competitiveness. From that point, you will be able to find the various CMMI based process improvement activities of the companies in the above. This paper presents the activity method, such as organization, process application method for the CMMI based process improvement, through the field application. Based on that, this paper enables you to understand the model application method. And we also carry out the application case analysis of defect management with the schedule/effort analysis and colleague's check activity to show the improvement effectiveness, based on the quantitative analysis. And we present the problem and improvement part of real application. The result of this paper will be used to understand the effectiveness of quantitative process management, mentioned in the CMM. And furthermore, we also expect this paper to be useful for the organization to improve the process based on CMM in the future.

• Korean Journal of Medicinal Crop Science
• /
• v.19 no.2
• /
• pp.103-110
• /
• 2011

This study was performed to enhance anticancer activities of Lithospermum erythrorhizon by eluting high amount of shikonin through ultra high pressure process. Extraction yield was increased up to 5~10% by ultra high pressure process, compare to the normal extraction processes such as water solvent extraction, 70% ethyl alcohol solvent extraction. The cytotoxicity of the extracts ($1.0{\mu}g/m{\ell}$) from ultra high pressure process was showed the lowest cytotoxicity 13.4% for human lung cell (HEL299). The anticancer activities showed 80~85% by adding $1.0{\mu}g/m{\ell}$ of the extracts from ultra high pressure process in several cancer cell lines such as AGS, Hep3B, MCF-7 and HeLa cells. Among them, MCF-7 cell of the endocrine system was highest inhibited than other cells. The anticancer activities of the extracts from ultra high pressure extraction process showed 10~15%, which was higher than the extracts from normal extraction processes. From HPLC analysis of the extracts, the contents of shikonin in the extracts from ultra high pressure process was 11.42% (w/w), which was 20% higher than others. This results indicate that ultra high pressure process could increase the extraction yield of shikonin and other contents, which resulted in higher anticancer activities.

• Korean Journal of Acupuncture
• /
• v.28 no.3
• /
• pp.1-12
• /
• 2011

Objectives : The purpose of this study is to review laser acupuncture studies to find possibility for applying high intensity laser to acupuncture and moxibustion treatment. Methods : Searching papers was performed using search engines of five electronic databases, including Pubmed, Thomson ISI, EMBASE, Sciencedirect, and EBSCO, from inception to May 2011 without language limitation. Inclusion criteria were clinical studies with human, randomized controlled trials (RCTs), case-control studies, and case reports. Selecting papers was performed with titles and abstracts in first step, scrutinize full text in second step, and then the extrated data was analyzed by two authors independently. The methodological quality for RCTs was evaluated using Jadad's scale. Results : Total 8 papers, (3 RCTs, 5 controlld studies, and 1 case reports), were finally selected. The study dealt with surgical laser, argon and $CO_2$ laser was one for each, with GaAs laser was two, and with new semiconductor laser, GaN, were four. The output range was from 110 mW to 15 W. The study diseases were alcohol addiction, knee osteoarthritis, bronchopneumonia and asthma for children, and circulation. All studies reported positive effect. The methodological quality in all RCTs was low because of below 3 points and all studies had few subject numbers. Conclusions : We suggest that high intensity laser can be applied to acupuncture and moxibustion. Further rigorous and well-designed study will be needed for various disease. The oriental medical society needs to take active measures to study and clinical application of acupuncture and moxibustion treatment with high intensity laser.

• Korean Journal of Crystallography
• /
• v.3 no.1
• /
• pp.37-43
• /
• 1992

KTiOP04 is a nonlinear optical crystal which is most widely used for frequency doubling of the radiation of Nd : YAG laser. In the experiment, sin ale crystals of KTiOP04 were grown by TSSG technique using 3K2W04·P2O5 flux. Low temperature gradient furnace suitable for KTP single crystal growth was used. Seed crystal was placed at the surface of the solution for the purpose of better observation of the growing crystals and the possibility of diameter control. Solution included 66.7mol% KTiOP04 for all experiments and its saturation temperature was 1020℃. The conditions of single crystal growth were as follows: cooling rate 0.2℃/h, crystal rotation rate 50rpm, c -axis seed. Using these conditions, single crystals up to 23 ×25×25mm3 have been groan from about 100cc solution. We have also observed a change in the crystal growth habit which resulted in the formation of large (201) faces and small (100) faces. And some crystals have (101) faces.

• Environmental Analysis Health and Toxicology
• /
• v.22 no.1 s.56
• /
• pp.83-90
• /
• 2007

This study was investigated the effort of growth and gonadal development in olive flounder, Paralichthys olivaceus exposed to PCBs Effluent Allowance Concentration, 3.0 ppb in Korea. Total length, body weight and weight gam of fish were no significant differences between two treatments (control: T.L.-110.0 mm, T.W.-9.61 g: treatment: T.L.-112.8 mm, T.W.-9.68 g), however, weight gain of fish unexposed to PCBs wat observed to increase gradually from 100 days after hatching (30 days after treatment). In the indifferentiated gonad to the juvenile stage, the differentiation of the ovary occured at 60 days after hatching (20 days after treatment) and that of the testis occured at 70 days after hatching (30 days after treatment) in two groups. In the ovary, the oogonia and ovarian lamellar appeared 130 days after hatching (50 days after treatment). The spermatogonia and resticular lobule of the testis were observed at 130 days after hatching (50 days after treatment). Testicular cyst appeared 140 days after hatching (60 days After treatment). There was no difference on the development of ovary and testis. There was no obvious difference of sex ratios. Therefore, These results considerate that PCBs have any effect for growth and gonadal development, but a little act for early growth in olive flounder.

• Journal of the Korean Solar Energy Society
• /
• v.29 no.6
• /
• pp.110-118
• /
• 2009

This research is an experimental study on BIPV Power performance of See-through a-si and Light-through applying external curtain wall. In case of See-through a-si Photovoltaic, appropriateness of facade applying standard($950\;{\times}\;980mm$) large($950\;{\times}\;1960mm$)area photovoltaic was examined. Transparent performance was also investigated through Power simulation according to angles and seasons of See-through a-si and Light-through Photovoltaic so that Power output was surveyed with using designed and manufactured Mock-up. When comparing See-through a-si to Light-through Photovoltaic for simulation Power output on angles based on full south aspect, which the result was that See-through a-si Power output according to Light-through Power output was the highest of 65.5% when applying a 90 degree angle. Monthly accumulated average Power output during winter seasons (December, January and February) applying a vertical plane on full south aspect was analyzed, which results in 66.37W/h of See-through a-si and 139.1 W/h of Light-through. See-through a-si Power output showed 47.7% in comparison with Light-through transparent. Also monthly, hourly average Power efficiency according to solar radiation during winter seasons (December, January and February) was that 4.7% of See-Through a-si and 9.8% of Light-through.