• The Transactions of the Korean Institute of Electrical Engineers C
• /
• v.55 no.3
• /
• pp.149-155
• /
• 2006

This paper presents a torsional micromirror detached from PZT actuators (TMD), whose rotational motion is achieved by push bars in the PZT actuators detached from the micromirror. The push bar mechanism is intended to reduce the bending, tensile and torsional constraints generated by the conventional bending bar mechanism, where the torsional micromirror is attached to the PZT actuators (TMA). We have designed, fabricated and tested prototypes of TMDs for single-axis and dual-axis rotation, respectively. The single-axis TMD generates the static rotational angle of $6.1^{\circ}$ at 16 VDC, which is 6 times larger than that of single-axis TMA, $0.9^{\circ}$. However, the rotational response curve of TMD shows hysteresis due to the static friction between the cover and the push bar in the PZT actuator. We have shown that 63.2% of the hysteresis is due to the static friction caused by the initial contact force of the PZT actuaor. Without the initial contact force, the rotational response curve of TMD shows linear voltage-angle characteristics. The dual-axis TMD generates the static rotational angles of $5.5^{\circ}$ and $4.7^{\circ}$ in x-axis and y-axis, respectively at 16 VDC. The measured resonant frequencies of dual-axis TMD are $2.1\pm0.1$ kHz in x-axis and $1.7\pm0.1$ kHz in y-axis. The dual-axis TMD shows stable operation without severe wear for 21.6 million cycles driven by 16 Vp-p sinusoidal wave signal at room temperature.

• Proceedings of the International Union of Geodesy And Geophysics Korea Journal of Geophysical Research Conference
• /
• 2003.05a
• /
• pp.16-16
• /
• 2003

본 연구는 ILP(International Lithosphere Project) Task Group II-4가 진행하고 있는 상부맨틀에 대한 3차원 구조도 작성 연구의 일환으로 수행되어졌으며 구조도 작성을 위한 데이터 베이스의 구조는 task group의 표준안을 따랐다. 기존 문헌과 기존의 데이터 베이스를 통해서 획득된 자료를 이용해 동해와 그 주변을 대상으로 하는 지역의 ($32-45^{\circ}$E, $122-148^{\circ}$N) 상부 670km까지의 3차원 구조도 작성을 위한 초기 모델을 구축하였으며, 이 절차를 최대한 자동화하는 프로그램을 포트란을 이용해 만들어보았다. 연구 지역에 대한 곡율을 계산하기 위해 표준타원체 모델인 WGS84과 geoid undulation 모델인 EGM96을 사용했으며 지형 고도 자료는 GTOPO30, GLOBE 1.0, 그리고 Smith and Sandwell 데이터베이스를 사용하여 지구 중심으로부터 지표까지의 거리를 구하였다. 연구지역은 $0.25^{\circ}$간격으로 나누었으며 총 5777개의 격자점을 정의하였으며 각각의 격자점에 1차원 수직구조를 부여함으로써 3차원 모델을 구축하였다. 그리고 지형적으로나 지질학적으로 유사한 지역을 하나의 구역으로 정의하고 동일한 수직구조를 부여함으로써 모든 격자점에 1차원 수직구조를 정의하지 않도록 하였다. 본 연구에서는 지표 지질은 모델에 고려하지 않았지만 지형학적으로 의미가 있는 분지나 수평적으로 불균질성이 뚜렷한 지역을 중심으로 연구 지역의 리젼을 정의하였다. 중요 리젼에 대한 지각구조에 대해서는 기존의 문헌을 통해 모델치를 정의하였으며 지각 하부부터 상부 670km에 대한 부분은 Task Group에서 제시한 표준 모델을 이용했다. 모델을 정의하기 위해 주어진 격자점에 대한 지구 중심으로부터 지오이드까지의 거리, 지오이드로부터 지표까지의 거리를 정의해주었으며, 각 격자점의 수직구조를 정의하기 위해 깊이에 따른 각 매질의 밀도, P파의 속도, S파의 속도, P파에 대한 Q값, S파에 대한 Q값을 정의 해주었다. S파의 속도를 구하기 위해서 지구 내부 물질을 포아송 매질이라는 가정 하에, 관계식을 $Vp{\;}={\;}SQRT(3){\;}{\times}{\;}Vs$ 이용하였다. 획득한 모델치들을 이용해 동해와 동해 인근 지역에 대한 초기모델을 구축하였다.

• Journal of radiological science and technology
• /
• v.46 no.2
• /
• pp.151-157
• /
• 2023

The purpose of this study was to develop an assist device that could correct and support patient position during biopsy on computed tomography (CT) using 3D printing technology. The development method was conducted in the order of 3D design, 3D output, intermediate evaluation for product, final assist device evaluation. The 3D design method was conducted in the order of prior research data survey, measurement, primary modeling, 3D printing, output evaluation, and supplementary modeling. The 3D output was the 3D printer (3DWOX 2X, Sindoh, Korea) with additive manufacturing technology and the polylactic acid (PLA) materials. At this time, the optimal strength was evaluated to infill degree of product as the 3D printing factors into 20%, 40%, 60%, and 80%. The intermediate evaluation and supplementation was measured noise in the region of interest (ROI) around the beam hardening artifact on the CT images. We used 128-channel MDCT (Discovery 75 HD, GE, USA) to scan with a slice thickness of 100 kVp, 150 mA, and 2.5 mm on the 3D printing product. We compared the surrounding noise of the final 3D printing product with the beginning of it. and then the strength of it according to the degree of infill was evaluated. As a result, the surrounding noise of the final and the early devices were measured at an average of 3.3 ± 0.5 HU and 7.1 ± 0.1 HU, respectively, which significantly reduced the noise of the final 3D printing product (p<0.001). We found that the percentage of infill according to the optimal strength was found to be 60%. Finally, development of assist devices for CT biopsy will be able to minimize artifacts and provide convenience to medical staff and patients.

• Journal of Veterinary Science
• /
• v.24 no.3
• /
• pp.48.1-48.13
• /
• 2023

Background: Senecavirus A (SVA), a member of the family Picornaviridae, is newly discovered, which causes vesicular lesions, lameness in swine, and even death in neonatal piglets. SVA has rapidly spread worldwide in recent years, especially in Asia. Objectives: We conducted a global meta-analysis and systematic review to determine the status of SVA infection in pigs. Methods: Through PubMed, VIP Chinese Journals Database, China National Knowledge Infrastructure, and Wanfang Data search data from 2014 to July 26, 2020, a total of 34 articles were included in this analysis based on our inclusion criteria. We estimated the pooled prevalence of SVA in pigs by the random effects model. A risk of bias assessment of the studies and subgroup analysis to explain heterogeneity was undertaken. Results: We estimated the SVA prevalence to be 15.90% (1,564/9,839; 95% confidence interval [CI], 44.75-65.89) globally. The prevalence decreased to 11.06% (945/8,542; 95% CI, 28.25-50.64) after 2016. The highest SVA prevalence with the VP1-based RT-PCR and immunohistochemistry assay was 58.52% (594/1,015; 95% CI, 59.90-83.96) and 85.54% (71/83; 95% CI, 76.68-100.00), respectively. Besides, the SVA prevalence in piglet herds was the highest at 71.69% (119/166; 95% CI, 68.61-98.43) (p < 0.05). Moreover, our analysis confirmed that the subgroups, including country, sampling year, sampling position, detected gene, detection method, season, age, and climate, could be the heterogeneous factors associated with SVA prevalence. Conclusions: The results indicated that SVA widely exists in various countries currently. Therefore, more prevention and control policies should be proposed to enhance the management of pig farms and improve breeding conditions and the environment to reduce the spread of SVA.

• Journal of English Language & Literature
• /
• v.56 no.6
• /
• pp.1047-1065
• /
• 2010

English inversion constructions are not only hard for non-native speakers to learn but also difficult to teach mainly because of their intriguing grammatical and discourse properties. This paper addresses grammatical issues in learning or teaching the so-called 'predicate inversion (PI)' construction (e.g., Equally important in terms of forest depletion is the continuous logging of the forests). In particular, we chart the grammatical (distributional, syntactic, semantic, pragmatic) properties of the PI construction, and argue for adata-driven teaching for English grammar. To depart from the arm-chaired style of grammar teaching (relying on author-made simple sentences), our teaching method introduces a datadriven teaching. With total 25 university students in a grammar-related class, students together have analyzed the British Component of the International Corpus of English (ICE-GB), containing about one million words distributed across a variety of textual categories. We have identified total 290 PI sentences (206 from spoken and 87 from written texts). The preposed syntactic categories of the PI involve five main types: AdvP, PP, VP(ed/ing), NP, AP, and so, all of which function as the complement of the copula. In terms of discourse, we have observed, supporting Birner and Ward's (1998) observation that these preposed phrases represent more familiar information than the postposed subject. The corpus examples gave us the three possible types: The preposed element is discourse-old whereas the postposed one is discourse-new as in Putting wire mesh over a few bricks is a good idea. Both preposed and postposed elements can also be discourse new as in But a fly in the ointment is inflation. These two elements can also be discourse old as in Racing with him on the near-side is Rinus. The dominant occurrence of the PI in the spoken texts also supports the view that the balance (or scene-setting) in information structure is the main trigger for the use of the PI construction. After being exposed to the real data and in-depth syntactic as well as informationstructure analysis of the PI construction, it is proved that the class students have had a farmore clear understanding of the construction in question and have realized that grammar does not mean to live on by itself but tightly interacts with other important grammatical components such as information structure. The study directs us toward both a datadriven and interactive grammar teaching.

• Lettere Italiane
• /
• no.30
• /
• pp.205-229
• /
• 2010

L'italiano ha diverse forme di pronomi clitici che vengono distinti in genere, numero e persona a seconda del nome di partenza. Quando appare un pronome clitico, l'ordine delle parole nella frase cambia: dal tipo normale SVO si passa al tipo SOV come in coreano. I pronomi clitici hanno una caratteristica molto diversa rispetto sia a piena NP sia ad una NP debole, e non sono compatibili con questi NP all'interno della frase, il che significa che i pronomi clitici si muovono in posizione superficiale lasciando la loro posizione originale dopo il verbo. Osservando questo fenomeno (movimento clitico da [DP, VP] a [spec, AgrOP]) e analizzando in questa sede solo il caso del pronome diretto si è cercato di evidenziare le regole precise di tale movimento determinato da "Case licensing" e "feature checking." Seguendo e accettando pienamente la precedente analisi di Belletti(1999), in cui vengono proposte due vie di procedimento del movimento dentro il AgrOP (una è [spec, AgrOP]; l'altra, [Agro, AgrOP], propongo qui l'esistenza di un ordine preciso in tale movimento: nel caso in cui un pronome diretto prenda una via di [spec, AgrOP], 'V' si muove prima fino ad arrivare alla [Agro, AgrSP], poi, 'pro' prosegue la sua strada fino alla [pro, AgrSP], e alla fine, il pronome diretto sale fino alla [spec, TP] per formare la costruzione proclitica; nel caso in cui un pronome diretto prenda invece l'altra via di [Agro, AgrOP], 'pro' sale prima fino alla [spec, AgrSP] tramite il movimento 'spec to spec', successivamente il 'pronome diretto' si muove verso la [Agro, AgrSP], e infine 'V' si sposta verso la [Agro, AgrSP] per formare la costruzione enclitica.

• Journal of Ginseng Research
• /
• v.48 no.4
• /
• pp.384-394
• /
• 2024

Background: Herpes simplex virus type 1 (HSV-1), known to latently infect the host's trigeminal ganglion, can lead to severe herpes encephalitis or asymptomatic infection, potentially contributing to neurodegenerative diseases like Alzheimer's. The virus generates reactive oxygen species (ROS) that significantly impact viral replication and induce chronic inflammation through NF-κB activation. Nuclear factor E2-related factor 2 (Nrf2), an oxidative stress regulator, can prevent and treat HSV-1 infection by activating the passive defense response in the early stages of infection. Methods and results: Our study investigated the antiviral effects of ginsenoside Rg5, an Nrf2 activator, on HSV-1 replication and several host cell signaling pathways. We found that HSV-1 infection inhibited Nrf2 activity in host cells, induced ROS/NF-κB signaling, and triggered inflammatory cytokines. However, treatment with ginsenoside Rg5 inhibited ROS/NF-κB signaling and reduced inflammatory cytokines through NRF2 induction. Interestingly, the Nrf2 inhibitor ML385 suppressed the expression of NAD(P)H quinone oxidoreductase 1(NQO1) and enhanced the expression of KEAP1 in HSV-1 infected cells. This led to the reversal of VP16 expression inhibition, a protein factor associated with HSV-1 infection, thereby promoting HSV-1 replication. Conclusion: These findings suggest for the first time that ginsenoside Rg5 may serve as an antiviral against HSV-1 infection and could be a novel therapeutic agent for HSV-1-induced neuroinflammation.

• Geomechanics and Engineering
• /
• v.36 no.5
• /
• pp.465-474
• /
• 2024

Uniaxial compressive strength (UCS) is a critical geomechanical parameter that plays a significant role in the evaluation of rocks. The practice of indirectly estimating said characteristics is widespread due to the challenges associated with obtaining high-quality core samples. The primary aim of this study is to investigate the feasibility of utilizing the gene expression programming (GEP) technique for the purpose of forecasting the UCS for various rock categories, including Schist, Granite, Claystone, Travertine, Sandstone, Slate, Limestone, Marl, and Dolomite, which were sourced from a wide range of quarry sites. The present study utilized a total of 170 datasets, comprising Schmidt hammer (SH), porosity (n), point load index (Is(50)), and P-wave velocity (Vp), as the effective parameters in the model to determine their impact on the UCS. The UCS parameter was computed through the utilization of the GEP model, resulting in the generation of an equation. Subsequently, the efficacy of the GEP model and the resultant equation were assessed using various statistical evaluation metrics to determine their predictive capabilities. The outcomes indicate the prospective capacity of the GEP model and the resultant equation in forecasting the unconfined compressive strength (UCS). The significance of this study lies in its ability to enable geotechnical engineers to make estimations of the UCS of rocks, without the requirement of conducting expensive and time-consuming experimental tests. In particular, a user-friendly program was developed based on the GEP model to enable rapid and very accurate calculation of rock's UCS, doing away with the necessity for costly and time-consuming laboratory experiments.

• Imaging Science in Dentistry
• /
• v.54 no.3
• /
• pp.289-295
• /
• 2024

Purpose: This study examined the influence of metal artifact reduction (MAR), the application of sharpening filters, and their combination on the diagnosis of horizontal root fracture (HRF) in teeth adjacent to a zirconia implant on cone-beam computed tomography (CBCT) examinations. Materials and Methods: Nineteen single-rooted teeth (9 with HRF and 10 without) were individually positioned in the right central incisor socket of a dry human maxilla. A zirconia implant was placed adjacent to each tooth. Imaging was performed using an OP300 Maxio CBCT (Instrumentarium, Tuusula, Finland) unit with the following settings: a current of 8 mA, both MAR modes(enabled and disabled), a 5×5 cm field of view, a voxel size of 0.085 mm, and a peak kilovoltage of 90 kVp. Four oral and maxillofacial radiologists independently evaluated the CBCT scans under both MAR conditions and across 3 levels of sharpening filter application (none, Sharpen 1×, and Sharpen 2×). Diagnostic metrics were calculated and compared using 2-way analysis of variance (α=5%). The weighted kappa test was used to assess intra- and inter-examiner reliability in the diagnosis of HRF. Results: MAR tool activation, sharpening filter use, and their combination did not significantly impact the area under the receiver operating characteristic curve, sensitivity, or specificity of HRF diagnosis (P>0.05). Intra- and inter-examiner agreement ranged from fair to substantial. Conclusion: The diagnosis of HRF in a tooth adjacent to a zirconia implant is not affected by the activation of MAR, the application of a sharpening filter, or the combination of these tools.

• The Journal of the Korean bone and joint tumor society
• /
• v.1 no.1
• /
• pp.84-90
• /
• 1995

To evaluate the role of radiation and chemotherapy after limb-saving operation in the management of soft tissue sarcoma, the authors analysed retrospectively 33 patients treated in department of Orthoaepdic Surgery and Radiation Therapy, Catholic University Medical College, in terms of survival rate, local recurrence rate and prognostic factors. There were 16 males and 17 females. The age distribution ranged from 16 to 81 years with mean age of 48. The follow-up period ranged from 2 to 10 years with average of 5.5 years. The histologic diagnoses were 9 liposarcoma(27.2%), 8 malignant fibrohistiocytoma(24.2%), 7 unclassifiable(21.2%), 3 rhabdomyosarcoma(9.1%), 2 malignant schwannoma, 2 synovral sarcoma, and 2 fibrosarcoma(6.1%) in orders. While marginal and intralesional margins were gained in 24 patients(72.7%), wide and radical margins were obtained only in 9 patients(27.3%). On postoperative 3 weeks, local irradiation of 5000-7000 cGy was delivered to all patients by shrinking field technique for 5-8 weeks. Of 33 patients, 16(45.5%) patients were received adjuvant chemotherapy in combination of adriamycin, cyclophosphamide & vicristine, or VP16 & ifosfamide based on histologic type and obtained surgical margin. The survival rates by direct method at 2 years and 5 years were 58% and 37% respectively. Local recurrences occured in 15 patients(45.5%) at average 16 months after operation. Survival rates at 2 years and 5 years were 37% and 22% in case of intralesional and manginal excision, 75% and 47% in case of wide and radical excision respectively with statistical significance(p<0.05). They were 25% and 17% in the presence of local recurrence, 67% and 42% in the absence of local recurrence respectively with statistical significance(p<0.05). Even though there was no statistical correlation between survival rate and tumor size(p>0.05), the authors considered tumor size as a significant prognostic factors as well as surgical margin and the presence of local recurrence.