• 제목/요약/키워드: Vortex Interaction

검색결과 364건 처리시간 0.026초

상류 캐비티로 인한 실린더 주위의 유동장 변화 (Horseshoe Vortices variation around a Circular Cylinder with Upstream Cavity)

  • 강경준;김동범;송성진
    • 대한기계학회:학술대회논문집
    • /
    • 대한기계학회 2008년도 추계학술대회B
    • /
    • pp.2625-2630
    • /
    • 2008
  • Horseshoe vortices are formed at the junction of an object immersed in fluid-flow and endwall plate as a result of three-dimensional boundary layer separation. This study shows preliminary results of the kinematics of such horseshoe vortices around a circular cylinder with a cavity (slot) placed upstream to disturb the primary separation line. Through the cavity, no mass flow addition (blowing) or reduction (suction) is applied. The upstream cavity weakens the adverse pressure gradient before the cavity. With the upstream cavity, a single vortex is found to form immediately upstream of the cylinder whereas a typical two vortex system is observed in the absence of the cavity. Furthermore, the strength of the single vortex tends to be reduced, resulting from the interaction with the separated flow convecting directly towards the leading edge of the cylinder.

  • PDF

Magnetic-vortex Dynamic Quasi-crystal Formation in Soft Magnetic Nano-disks

  • Kim, Junhoe;Kim, Sang-Koog
    • Journal of Magnetics
    • /
    • 제22권1호
    • /
    • pp.29-33
    • /
    • 2017
  • We report a micromagnetic numerical study on different quasi-crystal formations of magnetic vortices in a rich variety of dynamic transient states in soft magnetic nano-disks. Only the application of spin-polarized dc currents to a single magnetic vortex leads to the formation of topological-soliton quasi-crystals composed of different configurations of skyrmions with positive and negative half-integer numbers (magnetic vortices and antivortices). Such topological object formations in soft magnets, not only in the absence of Dzyaloshinskii-Moriya interaction but also without magnetocrystalline anisotropy, are discussed in terms of two different topological charges, the winding number and the skyrmion number. This work offers an insight into the dynamic topological-spin-texture quasi-crystal formations in soft magnets.

슬롯 각도에 따른 경계층 상호작용의 피동제어 성능 및 유동 구조 비교 연구

  • 이훈식;이재환;김종인
    • EDISON SW 활용 경진대회 논문집
    • /
    • 제6회(2016년)
    • /
    • pp.96-100
    • /
    • 2016
  • 슬롯판을 이용한 경사충격파와 경계층 간섭유동 제어에서, 슬롯의 각도를 바꾸어 가며 제어 성능을 비교하는 수치적 연구가 수행되었다. 기준이 되는 수직 슬롯, 각도를 달리한 6개의 case를 선정하여 하여 충격파 뒤에서 전압손실 및 경계층 안정성을 기준으로 제어 성능을 평가하였다. 수치해석 결과 모든 형상에 대해 제어하지 않은 상태보다 좋은 성능을 얻었다. 공력성능이 뛰어난 그룹과 그렇지 않은 그룹을 구분하여 슬롯과 공동 유동 구조를 분석하면서 경계층 불안정성을 야기하고 전압손실 감소에 영향을 미치는 것은 경계층과 충격파가 상호작용하는 영역에서 Vortex를 얼마나 제어할 수 있는지 여부임을 알 수 있었고, 이러한 Vortex를 얼마나 제어할 수 있는지에 따라 공력 성능이 결정됨을 파악할 수 있었다.

  • PDF

와동간의 상호작용이 경계층 및 열전달에 미치는 영향에 관한 연구 ( I ) - Common flow down에 관하여 - (An Experimental Study on the Effects of the Boundary Layer and Heat Transfer by Vortex Interactions ( I ) - On the common flow down -)

  • 홍철현;양장식;이기백
    • 대한기계학회논문집B
    • /
    • 제24권2호
    • /
    • pp.288-297
    • /
    • 2000
  • This paper describes the results of an experimental investigation of the flow characteristics and the heat transfer rate on a surface by interaction of a pair of vortices. The test facility consists of a boundary-layer wind tunnel with a vortex introduced into the flow by half-delta wings(vortex generators) protruding from the surface. In order to control the strength of the two longitudinal vortices, the angles of attack of the vortex generators are varied from 20 degree to 45 degree, but spacings between the vortex generators are fixed to 4 cm. The 3-dimensional mean velocity downstream of the vortex generators is measured by a five-hole pressure probe, and the hue-capturing method using the thermochromatic liquid crystals has been used to provide the local distribution of the heat transfer coefficient. By using the method mentioned above, the following conclusions are obtained from the present experiment. The boundary layer is thinned in the regions where the secondary flow is directed toward the wall and thickened where it is directed away from the wall. The peak augmentation of the local heat transfer coefficient occurs in the downwash region near the point of minimum boundary-layer thickness. Streamwise distributions of averaged Stanton number on the measurement planes show very similar trends for all the cases(${\beta}=20^{circ},\;30^{\circ}\;and\;45^{\circ}$).

반응 및 비반응 제트 유동장에서 단일 와동의 전개 및 구조에 대한 수치모사 (Numerical Simulation of the Evolution and Structure of a Single Vortex in Reacting and Non-reacting Jet Flow Fields)

  • 황철홍;오창보;이창언
    • 한국항공우주학회지
    • /
    • 제32권10호
    • /
    • pp.28-37
    • /
    • 2004
  • 반응 및 비반응 유동장에서 단일와동의 전개 및 와(渦) 구조 검토를 위해 2 차원 직접 수치모사를 수행하였다. 수치기법으로는 낮은 마하수 근사법이 적용된 예측-교정자법이 적용되었으며, 연소모텔로는 2단계 총괄 반응식이 사용되었다. 반응 및 비반응 유동장에서 단일와동의 거동 비교를 통해, 와동의 전개특성 및 구조는 화학반응으로부터 생성된 열 뿐만 아니라 부력에 의해 생성된 외부 와동에 크게 영향을 받음을 확인하였다. 또한 반응장의 경우에 부피 팽창항, Baroclinic torque항 및 부력항에 의해 와동의 구조가 크게 변화될 수 있음을 알았다.

푸리에-스펙트럴 법을 사용한 근접 편대비행 항공기의 와 거동 계산 (Computation of Wake Vortex Behavior Behind Airplanes in Close Formation Flight Using a Fourier-Spectral Method)

  • 지승환;한철희
    • 한국항공우주학회지
    • /
    • 제48권1호
    • /
    • pp.1-11
    • /
    • 2020
  • 항공기에서 발생한 후류의 거동은 항공기의 성능과 비행안정성에 큰 영향을 미친다. 본 연구에서는 푸리에-스펙트럴법을 사용하여 근접 편대비행을 하고 있는 항공기 날개 후류 거동에 관하여 연구하였다. 초기와의 순환강도, 상대위치 등에 따라 와들의 거동이 복잡한 양상으로 나타났다. 와의 순환강도 값이 큰 경우 와들의 이동이 크게 나타났다. 초기에는 가까이 위치한 와의 영향을 받아 이동하지만 이동하는 과정에서 다른 와와 가깝게 되면 새로운 경로를 형성하였다. 점성이 클수록 와의 반경이 증가하여 와 반경 근처로 새롭게 진입하는 와와 상호작용이 강해진다. 향후 항공기가 이착륙 시에 발생하는 지면 효과를 고려한 후류 거동 해석 연구를 수행하고자 한다.

Unsteady galloping of sharp-edged bluff bodies: experimental observations on the effect of the wind angle of attack

  • Chen, Cong;Dai, Bingyu;Wieczorek, Niccolo;Unglaub, Julian;Thiele, Klaus
    • Wind and Structures
    • /
    • 제35권4호
    • /
    • pp.255-268
    • /
    • 2022
  • Light-weight or low-damped structures may encounter the unsteady galloping instability that occurs at low reduced wind speeds, where the classical quasi-steady assumption is invalid. Although this unsteady phenomenon has been widely studied for rectangular cross sections with one side perpendicular to the incidence flow, the effect of the mean wind angle of attack has not been paid enough attention yet. With four sectional models of different side ratios and geometric shapes, the presented research focuses on the effect of the wind angle of attack on unsteady galloping instability. In static tests, comparatively strong vortex shedding force was noticed in the middle of the range of flow incidence where the lift coefficient shows a negative slope. In aeroelastic tests with a low Scruton number, the typical unsteady galloping, which is due to an interaction with vortex-induced vibration and results in unrestricted oscillation initiating at the Kármán vortex resonance wind speed, was observed for the wind angles of attack that characterize relatively strong vortex shedding force. In contrast, for the wind angles of attack with relatively weak shedding force, an "atypical" unsteady galloping was found to occur at a reduced wind speed clearly higher than the Kármán-vortex resonance one. These observations are valid for all four wind tunnel models. One of the wind tunnel models (with a bridge deck cross section) was also tested in a turbulent flow with an intensity about 9%, showing only the atypical unsteady galloping. However, the wind angle of attack with the comparatively strong vortex shedding force remains the most unfavorable one with respect to the instability threshold in low Scruton number conditions.

종방향 와동이 유체유동 및 열전달 특성에 미치는 영향에 관한 실험적 연구 (An Experimental Study on the Effect of Fluid Flow and Heat Transfer Characteristics by the Longitudinal Vortices)

  • 양장식;김은필
    • 설비공학논문집
    • /
    • 제12권9호
    • /
    • pp.843-852
    • /
    • 2000
  • The flow characteristics and the heat transfer rate on a surface by interaction of a pair of vortices were studied experimentally. The test facility consisted of a boundary-layer wind tunnel with a vortex introduced into the flow by half-delta winglet protruding from the surface. In order to control the strength of the longitudinal vortices, the angles of attack of the vortex generators were varied from $\pm20\;degree\;to\;\pm45$ degree, but spacings between the vortex generators were fixed to 4 cm. The 3-dimensional mean velocity measurements were made using a five-hole pressure probe. Heat transfer measurements were made using the thermochromatic liquid to provide the local distribution of the heat transfer coefficient. By using the method mentioned above, the following conclusions were obtained from the present experiment. The boundary layer was thinned in the regions where the secondary flow was directed toward the wall and thickened where it was directed away from the wall. The peak augmentation of the local heat transfer coefficient occurred in the downwash region near the point of minimum boundary-layer thickness.

  • PDF

로터 블레이드와 전방와류의 상호작용에 의한 진동특성 측정에 관한 연구 (A Study on The Measurement of Vibration Characteristics by Iteration of The Rotor Blade and The Front Vortex)

  • 이명옥;최종수;이욱
    • 한국소음진동공학회:학술대회논문집
    • /
    • 한국소음진동공학회 2005년도 춘계학술대회논문집
    • /
    • pp.170-175
    • /
    • 2005
  • The focus of this paper is to observe the aerodynamic and vibration characteristics of the NACA0012 blade(AR=16.6) fixed on the lower surface of the wind tunnel, by changing air speed and the blade's angle of attack. After fixing a slit-typed vortex generator on the front of the blade, it could be observed that the vibrational characteristics caused by interactions between vortex and blade through the 5-hole pilot tubes. And, also, two different blades in stiffness had been prepared for observing those characteristics above in this experiment. The results were compared with the given stiffness of blade, as well. According to the results, it is clear to recognize that the vibration spectrum increases while air speed and angle of attack increase, and, also, less stiffness means bigger vibration spectrum.

  • PDF

진공청소기 원심홴의 유동과 소음원 해석 (An Alysis of Flow and Noise Source for Vacuum Cleaner Centrigugal Fan)

  • 전완호;유기완;이덕주;이승갑
    • 소음진동
    • /
    • 제7권1호
    • /
    • pp.99-106
    • /
    • 1997
  • Centrigugal fans are widely used due to their ability to achieve relatively high pressure ratios in a short axial distance compared to axial fans. Because of their widespread use, the noise generated by these machines causes one of serious problems. In general, centrigugal fan noise is often dominated by tones at BPF(blade passage frequency) and its higher harmonics. This is a consequence of the strong interaction between the periodic flow discharged radially from the impeller and the stator blades or the cutoff. But in vacuum cleaner fan the noise is dominated by not only the discrete tones of BPF but also broadband frequencies. In this study we investigate the mechanism of broadband noise and predict for the unsteady flow field and the acoustic pressure field associated with the centrifugal fan. DVM(discrete vortex method) is used to calculates the flow field and the Lowson's method is used to predict the acoustic pressures. From the results we find that the broadband noise of a circular casing centrifugal fan is due to the unsteady force fluctuation around the impeller blades related to the vortex shedding. The unsteady forces associated with the shed vortices at impeller and related to the interactions to the diffuser and the exit.

  • PDF