• Journal of Information Processing Systems
• /
• 제8권1호
• /
• pp.55-66
• /
• 2012

This paper presents a dual modeling method that simulates the graphic and haptic behavior of a volumetric deformable object and conveys the behavior to a human operator. Although conventional modeling methods (a mass-spring model and a finite element method) are suitable for the real-time computation of an object's deformation, it is not easy to compute the haptic behavior of a volumetric deformable object with the conventional modeling method in real-time (within a 1kHz) due to a computational burden. Previously, we proposed a fast volume haptic rendering method based on the S-chain model that can compute the deformation of a volumetric non-rigid object and its haptic feedback in real-time. When the S-chain model represents the object, the haptic feeling is realistic, whereas the graphical results of the deformed shape look linear. In order to improve the graphic and haptic behavior at the same time, we propose a dual modeling framework in which a volumetric haptic model and a surface graphical model coexist. In order to inspect the graphic and haptic behavior of objects represented by the proposed dual model, experiments are conducted with volumetric objects consisting of about 20,000 nodes at a haptic update rate of 1000Hz and a graphic update rate of 30Hz. We also conduct human factor studies to show that the haptic and graphic behavior from our model is realistic. Our experiments verify that our model provides a realistic haptic and graphic feeling to users in real-time.

• 한국가스학회지
• /
• 제19권2호
• /
• pp.37-44
• /
• 2015

본 연구에서는 CBM의 1차 생산뿐 아니라 $CO_2$나 $N_2$ 주입을 통한 ECBM, 혹은 지중저장을 목적으로 석탄층에 $CO_2$를 주입할 때 발생할 수 있는 암체의 부피변화 영향을 고려하여 기존의 Langmuir 흡착 관계식을 개선하였다. 본 모델의 검증을 위해 $CO_2$나 $CH_4$, $N_2$의 단일성분 흡착실험 데이터에 기존 Langmuir 모델값과 본 모델의 결과값을 비교하였다. 그 결과, 기존 모델에서는 흡착용량이 큰 석탄일수록, 흡착친화도가 큰 가스일수록 실험값과 모델값 사이의 오차가 커지는 경향이 나타났지만 본 모델에서는 모든 조건에서 실험결과를 잘 묘사하였고 본 모델을 통해 예측한 부피변형률 역시 실험값과 유사함을 확인하였다. 이렇게 개선된 단일성분 흡착모델을 혼합가스의 흡착모델인 IAS 모델에 적용하여 부피변화가 고려된 IAS모델로 개선하였다. 그 결과 혼합가스에 대한 흡착거동 역시 기존 모델에 비해 정확도를 높였고 이는 Hall 등(1994)이 수행한 혼합가스의 흡착실험결과와의 매칭을 통해 확인하였다.

• International Journal of CAD/CAM
• /
• 제8권1호
• /
• pp.41-44
• /
• 2009

This paper describes an implementation of virtual teeth modeling for a haptic dental simulation. The system allows dental students to practice dental procedures with realistic tactual feelings. The system requires fast and stable haptic rendering and volume modeling techniques working on the virtual tooth. In our implementation, a volumetric implicit surface is used for intuitive shape modification without topological constraints and haptic rendering. The volumetric implicit surface is generated from input geometric model by using a closest point transformation algorithm. And for visual rendering, we apply an adaptive polygonization method to convert volumetric teeth model to geometric model. We improve our previous system using new octree design to save memory requirement while increase the performance and visual quality.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2000년도 춘계학술대회 논문집
• /
• pp.703-707
• /
• 2000

Machine tool errors have to be characterized and predicted to improve machine tool accuracy. A real-time error compensation system has been developed based on volumetric error synthesis model which is composed of machine tool errors. This paper deals with new algorithm about verification of machine tool errors. This new algorithm uses a simplified volumetric error synthesis model. This simplified model is constructed with only main components among the error components of the machines. This main error components are analyzed by three-dimensional helical ball bar test. By substituting result of helical ball bar test fer simplified model, we could find that obtained error components are closed to real error components.

• The Journal of Advanced Prosthodontics
• /
• 제12권6호
• /
• pp.361-368
• /
• 2020

PURPOSE. The present study aimed to evaluate the accuracy of a desktop scanner and intraoral scanners based on the volumetric dimensions of a complete arch. MATERIALS AND METHODS. Seven reference models were fabricated based on the volumetric dimensions of complete arch (70%, 80%, 90%, 100%, 110%, 120%, and 130%). The reference models were digitized using an industrial scanner (Solutionix C500; MEDIT) for the fabrication of a computer-aided design (CAD) reference model (CRM). The reference models were digitized using three intraoral scanners (CS3600, Trios3, and i500) and one desktop scanner (E1) to fabricate a CAD test model (CTM). CRM and CTM were then superimposed using inspection software, and 3D analysis was conducted. For statistical analysis, one-way analysis of variance was used to verify the difference in accuracy based on the volumetric dimensions of the complete arch and the accuracy based on the scanners, and the differences among the groups were analyzed using the Tukey HSD test as a post-hoc test (α=.05). RESULTS. The three different scanners showed a significant difference in accuracy based on the volumetric dimensions of the complete arch (P<.05), but the desktop scanner did not show a significant difference in accuracy based on the volumetric dimensions of the complete arch (P=.808). CONCLUSION. The accuracy of the intraoral scanners was dependent on the volumetric dimensions of the complete arch, but the volumetric dimensions of the complete arch had no effect on the accuracy of the desktop scanner. Additionally, depending on the type of intraoral scanners, the accuracy differed according to the volumetric dimensions of the complete arch.

• 방송공학회논문지
• /
• 제27권2호
• /
• pp.207-215
• /
• 2022

최신 볼류메트릭 기술이 제공하는 높은 기하학적 정확도와 사실성은 실제 객체와 캡춰된 3D 모델 간 높은 일치도를 보장한다. 그럼에도 불구하고 이렇게 획득된 3D 모델은 프레임 간 완전히 독립적인 3D모델로 시퀀스를 구성하고 있다는 측면에서, 매 프레임 모델 표면 구조(Geometry)의 일관성이 보장 되지 않으며, 정점(Vertex)의 밀도가 매우 높고 정점 간 연결 노드(Edge)가 매우 복잡해지는 특징을 확인 할 수 있다. 이 기술을 통해 생성된 3D 모델은 영화나 비디오 게임 제작 파이프라인에서 제작된 모델과는 본질적으로 다르며, 실시간 렌더링, 애니메이션 및 시뮬레이션, 압축과 같은 응용 분야에서 직접 사용하기에 적합하지 않다. 이와는 대조적으로 우리의 방법은 프레임 간 3D 모델 표면 구조의 높은 일관성을 확보하는 리메싱(Remeshing)과 비강체 표면(Non-rigid Shape)의 대응(Correspondences) 및 매칭(Matching)을 통한 점진적 변형(Deformation) 과정 및 텍스쳐 전달(Texture Transfer) 과정을 연결함으로서 볼류메트릭 3D 모델 시퀀스 품질의 일관성을 유지하며, 후 처리 과정의 자동화를 제공한다.

• 한국정밀공학회지
• /
• 제18권3호
• /
• pp.143-151
• /
• 2001

Machine tool errors have to be characterized and predicted to improve machine tool accuracy. A real-time error compensation system has been developed based on volumetric error synthesis model which is composed of machine tool errors. This paper deals with new algorithm about verification of machine tool errors. This new algorithm uses a simplified volumetric error synthesis model. This simplified model is constructed with only main components among the error components of the machine. The main error components are analyzed by ball bar test of hemispherical helix. The novel measurement method using ball bar system has many advantages which are more efficient, easier to use than conventional measurement system.

• 로봇학회논문지
• /
• 제18권4호
• /
• pp.481-486
• /
• 2023

The purpose of this study is to optimize parameters of a contact model to obtain similar ground contact force of human walking. Dynamic walking simulation considering ground contact is performed to determine load specifications when developing walking assist robots. Large contact forces that are not observed in actual experimental data occur during the simulation at the initial contact (e.g., heel contact). The large contact force generates unrealistic large joint torques. A lower exoskeleton robot with no ankles is developed with the Matlab simscape and the nonlinear hyper volumetric contact model is applied. Parameters of the nonlinear hyper volumetric model were optimized using actual walking contact force data. As a result of optimization, it was possible to obtain a contact force pattern similar to actual walking by removing the large contact force generated during initial contact.

• 한국생산제조학회지
• /
• 제4권3호
• /
• pp.39-47
• /
• 1995

This paper suggests generalize mathematica mode for the benefit of volumetric error analysis of a multi-axis machine tool machining a sculptured surfaces. The volumetric error, in this paper, is defined as a three dimensional error at the cutting point, which is caused by the geometric errors and the kinematic errors of each axis and alignment errors of the cutting tool. The actual cutting position is analyzed based on the form shaping model including a geometric error of the moving carriage, where a form shaping model is derived from the homogeneous transformation matrix. Then the volumetric error is obtained by calculating the position difference between the actual cutting position and the ideal one calculated from a Nonuniform Rational B-Spline named as NURES. The simulation study shows the effectiveness for predicting the behavior of machining error and for the method of error compensation.

• 한국생산제조학회지
• /
• 제9권2호
• /
• pp.102-111
• /
• 2000

Methodology of volumetric error identification and compensation is presented to improve the accuracy of NC machine tools by using a reference artifact and a touch trigger probe. Homogeneous transformation matrix and kinematic chain are used for modeling the geo-metric and thermal errors of a three-axis vertical machining center. The reference artifact is designed and fabricated to identify the model parameters by machine tool metrology. Parameters in the error model are able to be identified and updated by direct measurement of the reference artifact on the machine tool under the actual conditions which include the thermal interactions of error sources. A volumetric error compensation system based on IBM/PC is linked with a FANUC CNC controller to compensate for the identified volumetric error in machining workspace.