• Journal of the Korean Society for Precision Engineering
• /
• v.13 no.6
• /
• pp.114-121
• /
• 1996

This paper presents an useful technique for assessing the volumetric errors in multi-axis machine tools using the kinematic double ball bar. This system has been developed based on the volumetric error map which describes the 3 dimensional errors of machine tools. The developed system inputs the measured radial data of 3 different planes, respectively XY,YZ,ZX, analysing the volumetric errors such as positional. straightness, angle, and squareness errors, etc. The developed system has been tested in a practical machine tool, and showed high potential for the error assessment of multi-axis machine tools.

• Journal of the korean Society of Automotive Engineers
• /
• v.10 no.4
• /
• pp.57-65
• /
• 1988

The study of unsteady gas exchange processes in the intake and exhaust systems of four-cylinder, four-stroke cycle internal combustion engine is described in this paper. The calculation model for the intake and exhaust systems is established and solved by the characteristic method for the equations defining these systems. A constant pressure theory is used for modeling branches of intake and exhaust manifolds. The relationship between the volumetric efficiency and the intake, exhaust pressure variation is clarified by simulation of these systems. It is found that the volumetric efficiency mainly depends on the intake pressure during the short period before the intake valves is closed, that the volumetric efficiency is influenced a little by intake chamber volume in the intake and exhaust system.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.6 no.2
• /
• pp.245-253
• /
• 2002

This study was focused on the effect of concrete strength and lateral ties of concrete columns using high-strength concrete. Thirty-six concrete columns with 20cm square cross-section were tested. Experimental parameters included the concrete strength, the distribution of longitudinal bars and the volumetric ratio, yield strength, spacing of lateral ties. From the experiments, we found that: 1) the increasing rate of the strength and ductility of concrete columns caused by confinement of lateral ties was decreasing, as the concrete strength increased. 2) The high volumetric ratio and the reduction of tie spacing had a tendency to enhance the strength and improve the ductility. 3) The high-strength concrete columns required high volumetric ratio of lateral ties to maintain the proper strength and ductility. It was observed that the current AIK design code to specify the maximum tie spacing of high-strength concrete columns led to the poor strength and ductility for seismic design.

• Korean Journal of Computational Design and Engineering
• /
• v.10 no.5
• /
• pp.303-313
• /
• 2005

This paper proposes a generalized NURBS model, called Volumetric NURBS or VNURBS for representing volumetric objects with multiple attributes embedded in multidimensional space. This model provides a mathematical framework for modeling complex structure of heterogeneous objects and analyzing inside of objects to discover features that are directly inaccessible, for deeper understanding of complex field configurations. The defining procedure of VNURBS, which explains two directional extensions of NURBS, shows VNURBS is a generalized volume function not depending on the domain and its range dimensionality. And the recursive a1gorithm for VNURBS derivatives is described as a computational basis for efficient and robust volume modeling. In addition, the specialized versions of VNURBS demonstrate that VNURBS is applicable to various applications such as geometric modeling, volume rendering, and physical field modeling.

• International Journal of CAD/CAM
• /
• v.8 no.1
• /
• pp.41-44
• /
• 2009

This paper describes an implementation of virtual teeth modeling for a haptic dental simulation. The system allows dental students to practice dental procedures with realistic tactual feelings. The system requires fast and stable haptic rendering and volume modeling techniques working on the virtual tooth. In our implementation, a volumetric implicit surface is used for intuitive shape modification without topological constraints and haptic rendering. The volumetric implicit surface is generated from input geometric model by using a closest point transformation algorithm. And for visual rendering, we apply an adaptive polygonization method to convert volumetric teeth model to geometric model. We improve our previous system using new octree design to save memory requirement while increase the performance and visual quality.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2009.10a
• /
• pp.510-512
• /
• 2009

A volumetric 3D display system based on a rotating two dimensional color LED array is set up. It has a cylinder display space ${\Phi}800{\times}640mm3$ which is composed of 256 slices of pictures in one 3D image with each slice $320{\times}256$ LED pixels. The volumetric image has 4 gray scales and 64 colors. The main structure and working principle of the system is described in detail.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2009.10a
• /
• pp.1371-1374
• /
• 2009

According to depth cues of an image, the optical engine of the solid volumetric true 3D display can project a sequence of slices of a 2D image to corresponding display at a set of liquid shutters (LC) locating at different depth. A single DLP optical engine developed for a solid volumetric true 3D display consists of a lamp, reflector, color wheel, hollow integrator, relays, DMD, and projection lens. The simulation results show that the optical engine designed for single DLP volumetric true 3D display satisfies the requirements.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2004.11a
• /
• pp.37-40
• /
• 2004

An experimental study was conducted to investigate the stress-strain behavior of confined concrete columns according to transverse reinforcement volumetric ratio. Uniaxial loading tests of eleven column specimens$(250\times100\times500mm)$ with rectangular section were conducted to study effect of confinement. The main variables in this test are transverse reinforcement volumetric ratio and cross tie arrangement. the results indicate that the strength and the ductility of confined concrete columns are subjected to transverse reinforcement volumetric ration and cross tie arrangement.

• Journal of the korean Society of Automotive Engineers
• /
• v.9 no.3
• /
• pp.85-93
• /
• 1987

The intake system of 4-cycle, 4-cylinder reciprocating engine is investigated the simple model composed of vessel, duct and throttling part. The numerical calculation based on the simulation is performed for the flow phenomena including heat transfer, friction and bend of duct at each part. In the multi-cylinder engine, the volumetric efficiency is increased a little as the junction location is closed to cylinder at the engine speed having maximum volumetric efficiency. The configuration and dimension of intake system have an influence on the inertia effect by resistance and pressure variation, and the magnitude of that is varied by the engine speed. Thus the volumetric efficiency is correlative to them. The volumetric efficiency is high as the intake valve close is advanced at the low engine speed, and is delayed at high speed.

• Proceedings of the Korean Society of Tribologists and Lubrication Engineers Conference
• /
• 2001.06a
• /
• pp.248-256
• /
• 2001

Capacities of screw are pumping, steady flow of polymer melts, volumetric efficiency, steady volumetric throughout etc. they are affected by geometry of screw, heat flux, pressure on inside barrel, rotating velocity, friction coefficient at screw surface etc. Also the temperature of polymer melts by heating pad and injection pressure play a very important role in the injection molding machine. by computation volumetric efficiency increases as rotating velocity increases, flight number increses, and decreases as friction coefficient increases. but volumetric throughout is different :s flight number increases with helix angle variability. so in this paper we analyze thermal distortion and stress of screw includes pressure and temperature distributions by finite element analysis to understand what design factors influence on thermo-mechanical characteristics of screw.