• Microbiology and Biotechnology Letters
• /
• v.4 no.3
• /
• pp.99-104
• /
• 1976

Experiments were carried out to establish the effects of acids in neutralization after alkaline treatment of rice straw, with which cellulosic single cell protein can be produced by cellulose utilizing bacteria, Cellulomonas flavigena KIST 321, previously isolated by authors. Following results were obtained. 1. Rice straw as carbon source was pretreated with 10 volumes of 1 normality of NH$_4$OH or NaOH(NaOH/substrate：40％, and then washed with water or neutralized with H$_3$PO$_4$, H$_2$SO$_4$, HCl and CH$_3$COOH. Among the above mentioned methods, neutralization with H$_3$PO$_4$after alkaline treatment was proved to be the most effective on its digestibility and SCP production. Dry cell 12.28g/$\ell$ and 78％ digestibility were obtained. 2. When rice straw was treated with NaOH solution, the result suggested that the productibity of cell-mass was attained on treatment of rice straw with 6％ of NaOH (NaOH/substrate ratio) for 15～24hrs at room temperature. 3. When rice straw was treated with NaOH, a volume of water to substrate is adequate by two or three fold and the amount of NaOH can be economized up to 5％ for the weight of rice straw. 4. The steaming of rice straw at 121$^{\circ}C$ for 30min. in alkaline treatment of rice straw gave the similiar effectiveness to that at room temperature for 15～24hrs. and accelerated the sterilization of the substrate. 5. Finally, the level of inorganic phosphate in a medium was investigated. 11.2g of dry cell was produced at the concentration of 0.2％, phosphate (phosphorous level 0.04％) in medium even though treated rice straw was neutralized with HCI instead of H$_3$PO$_4$, and 12.2g/$\ell$ at the concentration of 0.3％ phosphate (phosphorous 0.04％) on neutralization with H$_2$SO$_4$.

• The Journal of Korean Society for Radiation Therapy
• /
• v.24 no.1
• /
• pp.39-43
• /
• 2012

Purpose: In hospital image-guided radiation therapy in patients with bladder cancer to enhance the reproducibility of the appropriate amount, depending on the patient's condition, and image-guided injection of saline system (On-Board Imager system, OBI, VARIAN, USA) three of the Cone-Beam CT dimensional matching (3D-3D matching) to be the treatment. In this study, the treatment of patients with bladder cancer at Cone-Beam CT image obtained through the analysis of the bones based matching and matching based on the bladder to learn about the differences, the bladder's volume change injected saline solution by looking at the bladder for the treatment of patients with a more appropriate image matching is to assess how the discussion. Materials and Methods: At our hospital from January 2009 to April 2010 admitted for radiation therapy patients, 7 patients with bladder cancer using a Folly catheter of residual urine in the bladder after removing the amount determined according to individual patient enough to inject saline CT-Sim was designed after the treatment plan. After that, using OBI before treatment to confirm position with Cone-Beam CT scan was physician in charge of matching was performed in all patients. CBCT images using a total of 45 bones, bladder, based on image matching and image matching based on the difference were analyzed. In addition, changes in bladder volume of Eclipse (version 8.0, VARIAN, USA) persuaded through. Results: Bones, one based image matching based on the bladder and re-matching the X axis is the difference between the average $3{\pm}2mm$, Y axis, $1.8{\pm}1.3mm$, Z-axis travel distance is $2.3{\pm}1.7mm$ and the overall $4.8{\pm}2.0mm$, respectively. The volume of the bladder compared to the baseline showed a difference of $4.03{\pm}3.97%$. Conclusion: Anatomical location and nature of the bladder due to internal movement of the bones, even after matching with the image of the bladder occurred in different locations. In addition, the volume of saline-filled bladder showed up the difference between the 4.03 percent, but matched in both images to be included in the planned volumes were able to confirm. Thus, after injection of saline into the bladder base by providing a more accurate image matching will be able to conduct therapy.

• Korean Journal of Soil Science and Fertilizer
• /
• v.43 no.4
• /
• pp.415-423
• /
• 2010

Pore network models are useful tools to investigate soil pore geometry. These models provide quantitative information of pore geometry from 3D images. This study presents a pore network model to quantify pore structure and hydraulic characteristics. The objectives of this work were to apply the pore network model to characterize pore structure from large images to quantify pore structure, calculate water retention and hydraulic conductivity properties from a three dimensional soil image, and to combine measured hydraulic properties from experiments with calculated hydraulic properties from image. Soil samples were taken from a site located at the Baltimore science center, which is located inside of the city. Undisturbed columns were taken from the site and scanned with a computer tomographer at resolutions of 22 ${\mu}m$. Pore networks were extracted by medial-axis transformation and were used to measure pore geometry from one of the scanned samples. Water retention and unsaturated hydraulic conductivity values were calculated from the soil image. Properties of soil bulk density, water retention and unsaturated hydraulic conductivity were measured from three replicates of scanned soil samples. 3D image analysis provided accurate detailed pore properties such as individual pore volumes, pore length, and tortuosity of all pores. These data made possible to calculate accurate estimations of water retention and hydraulic conductivity. Combination of the calculated and measured hydraulic properties gave more accurate information on pore sizes over wider range than measured or calculated data alone. We could conclude that the hydraulic property computed from soil images and laboratory measurements can describe a full structure of intra- and inter-aggregate pores in soil.

• Radiation Oncology Journal
• /
• v.17 no.4
• /
• pp.269-274
• /
• 1999

Purpose : To evaluate the Possibility of decreasing the radiation dose and to determine optimum treatment volume in intracranial germinomas. Materials and Methods : Forty five patients with pathologically-verified or presumed germinomas by a radiosensitivity test who had been treated with radiotherapy (RT) alone between 1971 and 1992 were retrospectively analyzed. The average age was 17.2 years with 68.9$\%$ of the patients being between the ages of 10$\~$20. The male and female ratio was 2.2:1. The locations of the primary tumors were at the pineal regions in 14 patients; the suprasellar regions in 12 patients; and multiple sites in 12 patients. Treatment volumes varied from a small local field (10) to the whole brain (7) or entire neuroaxis irradiation(28). All the cases after 1982 received craniospinal irradiation (CSI). Radiation doses were 41-59 Gy (median 48.5 Gy) to the primary tumor site and 19.5$\~$36 Gy (median 24 Gy) to the neuroaxis. The median follow-up period was 82 months with a range of 2$\~$260 months. Results : All the patients showed complete response after RT. Four patients sufferred from recurrence 14, 65, 76, and 170 months after RT, respectively, and two patients died with intercurrent disease. One of four recurrent cases was salvaged by re-irradiation. Therefore, a 5 and 10 year overall suNival was 95.3$\%$ and 84.7 $\%$ respectively. Five and ten year disease-free survival was 97.6 $\%$ and 88.8 $\%$ respectively. All the recurrences occurred in the patients who received local RT (3/10) or whole brain RT (1/7) with a radiation dose of 48-50 Gy. None of the patients who received CSI suffered recurrence. There was no recurrence among the 15 patients who received $\leq$45 Gy to the primary site and the 18 patients who received $\leq$24 Gy (6 patients received 19.5 Gy) to the neuroaxis. Conclusion : CSI is recommended for the treatment of intracranial germinomas. The radiation dose can be safely decreased to $\leq$45 Gy on a primay tumor site and 19.5 Gy on the spine.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.37 no.5
• /
• pp.612-617
• /
• 2008

Tetrodotoxin (TTX) analogues were first determined from the liver extracts of puffer fish, Takifugu niphobles, by LC/MS with Hydrophilic Interaction Liquid Chromatography (HILIC). In total, 7 TTX analogues were detected within 20 minutes as follows; 5,6,11-trideoxyTTX (34.0%, 1,029.6 nmol/g), 6,11-dideoxyTTX (29.3%, 887.6 nmol/g), TTX (22.1%, 667.8 nmol/g), 4,9-anhydro-TTX (11.2%, 339.3 nmol/g), 11-deoxyTTX＋5-deoxyTTX (2.6%, 78.6 nmol/g), and 4-epiTTX (0.8%, 23.6 nmol/g). Mouse toxicity of diluted liver extracts showed the highest toxicity at pH 3 (8.7 MU/mL) and decreased, as increasing pH, to 1.4 MU/mL at pH 10. At acidic (pH 5) and neutral conditions (pH 7), mouse toxicity of liver extracts (79 MU/mL) decreased slowly, as increasing temperature from $80^{\circ}C$ to $115^{\circ}C$, and time until 1 hour; in contrast, at the akaline condition (pH 9), the toxicity decreased rapidly to the more than half within 10 minutes. Individual toxicity of the fillet of T. niphobles were between $43.2{\sim}106.7$ MU, and $64{\sim}78%$ of its toxicity was eluted to soup when boiled with 3 volumes of water during 10 minutes.

• Journal of Korean Society of Forest Science
• /
• v.76 no.3
• /
• pp.181-192
• /
• 1987

The purpose of this study is to develop the method of stand volume estimation by the plotless sampling method. The required data were obtained from 164 sampling plots in the red pine(Pinus densiflora) stands which were located in Kyeong-gi, Chung-nam, Chung-buk and Kang-won areas, and related factors were measured actually. The method of stand volume estimation and several tables were drivel from these data. 1. The relationship between the values of stand average height, basal area per ha, and basal area height obtained from the plotless sampling method and values measured actually could be described by the equation Y=bx, where b approached nearly 1.0 and there were no significant differences between them. Therefore stand volumes could be estimated by the plotless sampling method. 2. The estimated equations of the stand voulumes, which were estimated using factors to be measured by dendrometer, are as follows ; logV=-0.0208+0.8497 logGH, logV=-0.0028+0.7981 logG+0.9313 logH. Stand volume tables by these estimated equations were shown in table 4, 5 and estimation error percentages were 9.16% and 8.50% respectively. FH=D/(1.5205+0.0994D) logFH=0.0451+0.2429 logD+0.3474 logH logFG=-0.0380+0.7758logG-0.0066logH F=H/ (-5.1697+2.6013H) F=FH/(-3.1256+2.7611FH) logF=-0.0634-0.0848 logGH-0.1224 logDi 4. Stand form height tables(table7, 8), form basal area tables(table 9), and stand form factor tables(table 10, 11) were prepared using the above estimated equations, and the estimation error percentages were less than 10%.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.40 no.7
• /
• pp.1017-1024
• /
• 2011

Korean wheat semolina (FS: fine semolina) with similar characteristics to durum wheat semolina was substituted at rates of 0, 10, 20, 30, 40, and 50% in pasta dough and the physical and cooking characteristics were investigated for making optimal pasta. Water absorption of the dough increased with the 10, 20, and 30% substitution ratio of FS. Development times were high with >30% substituted FS. This result positively influenced an increase in production and the preparation of the fresh noodle pasta. Furthermore, soft textured fresh noodles could be made due to the decrease in stability and increased weakness of the >30% substituted FS. The amylograph gelatinization characteristics of Korean wheat semolina exhibited an increase of gelatinization temperature and decrease of maximum viscosity when compared with durum wheat. The handling property of the dough showed more than 4 points in all sample groups. Weight and volume decreased and turbidity and cooking loss increased according to the increasing amount of substituted FS. However, samples with ${\leq}$ 30% FS substitution ratio had similar volumes and cooking losses when compared to the control. The L- and a-values increased and the b-value of color decreased as more FS was added. In a texture analysis, the hardness of the cooking noodles showed a low value with the >30% substituted FS. Springiness, gumminess, and chewiness exhibited a high value. In the results of a sensory evaluation, overall acceptability was high score with more than 7 points for the 30% added FS. The preferences for pasta colors were divided into white, which is similar to the Korean traditional noodle, and yellow, which is similar to durum wheat. Flavor and taste were not affected by substituting with FS. Low hardness and high chewiness was the most preferred noodle. These results suggest that >30% substituted FS was suitable for increasing quality and organoleptic qualities of Korean wheat pasta.

• Korean Journal of Oriental Medicine
• /
• v.3 no.1
• /
• pp.1-15
• /
• 1997

${\ulcorner}$Classified Collection of Medical Prescriptions${\lrcorner}$(1445) is a book compiled the medical achievements of China and Choseon in those times and it's our source of pride to have it In this country. It also deserves careful investigation since this book can provide some clues of features of missing books in China and Korea. The extent of accuracy of xylographica of old books determines the possiblity of in depth further study. So authors attempted to investigate the xylographica of ${\ulcorner}$Classified Collection of Medical Prescriptions${\lrcorner}$ one of the 3 main books in Korea. Previous investigation done by Miki Sakae and Kim Doo Jong are noticeable. On the basis of their respective works, we analyzed 'Annals of the Choseon Dynasty' to find records related with ${\ulcorner}$Classified Collection of Medical Prescriptions${\lrcorner}$ and estimated the situation of its publication. We tried figure the situation of those times of China, Japan and Korea(including North Korea) and tried to estimate the book's original xylographica as much as we could. By King Sejong's command, the first draft of ${\ulcorner}$Classified Collection of Medical Prescriptions${\lrcorner}$ consisted of 365 books was made by collaboration of civil officials and medical officers during the period from 1443 to 1445. And then from 1451(first year of Moonjong's reign) to 1464(l0th year of Sejo's reign) lots of manpowers were employed and through the process of countless erasure, proofreading, arrangement and rearrangement revised version of ${\ulcorner}$Classified Collection of Medical Prescriptions${\lrcorner}$ which is called by Sejo text was completed. After 3 years of wood engraving work, the first printed form of ${\ulcorner}$Classified Collection of Medical Prescriptions${\lrcorner}$ (alternately called Seongjong text) in folding case consisted of 266 chapters, 264 volumes came into the world in 1477.(8th year of Seongjong's reign). This was 32 years after the initial completion of the edition. So ${\ulcorner}$Classified Collection of Medical Prescriptions${\lrcorner}$ exists in three forms as Sejong text, Sejo text and Seongjong text respectively. Since those texts were plundered during the Japanese invasion of Korea in 1592, none of the original copy remains within korea. The texts were constantly moved to kadeungcheongieong, to Kongdeungpyeongio, Jesookoan of Edo, to East University of department of classic books, to Cheoncho archives, to the Imperial Museum and finally is kept in the royal palace at present. (Doseoryo text Eulhae printing type) Reduced-size republication books of ${\ulcorner}$Classified Collection of Medical Prescriptions${\lrcorner}$ in wooden type were imported at the time of 'Byeongja Korea-Japan Treaty in 1876' and of those 2 books, one copy was treasured in the Royal Household of the Yi Dynasty and than was lost during the Korean War circa 1950. The other remaining copy has been kept succesively by Kojong's imperial grant, Royal doctor Hong Cheol Bo, Hong Taek Joo, Hong Ik Pyo the book agent, and now is kept In Yonsei University Library and this is the only existing copy in Korea at present. In 1965, Dongyang Medical college published the transcription version of ${\ulcorner}$Classified Collection of Medical Prescriptions${\lrcorner}$ consisting of 11 books and then in 1981 after edition and arrangement by Choonghoa(中華) publishing company, photoprint copy of ${\ulcorner}$Classified Collection of Medical Prescriptions${\lrcorner}$ was published in Keumgang(金剛) publishing company In 1991, October Yeokang(驛江) publishing company producd photocopies of ${\ulcorner}$Classified Collection of Medical Prescriptions${\lrcorner}$ which were previously translated into Korean by North Korea Institute of Oriental Medicine and then issued by medical publishing company. In China, two institutes, Zhejiang Institute of Traditional Chinese Medicine and Huzhou Traditional Chinese Medical Hospital cooperated to publish a revised and marked text consiting of 11 books by adding marking points to japanse Edohakhoondang text which were used as a reference. Both the korean and chinese texts issued were grounded by the ${\ulcorner}$Classified Collection of Medical Prescriptions${\lrcorner}$ kept in the royal palace. Any further study concerning ${\ulcorner}$Classified Collection of Medical Prescriptions${\lrcorner}$ can acquire its accuracy and objectivity when the japanese text kept in the royal palace is taken as an original copy.

• The Journal of Korean Academy of Prosthodontics
• /
• v.47 no.1
• /
• pp.21-28
• /
• 2009

Purpose: The purpose of this study was to compare the wear characteristics of human enamel opposing 2 heat-pressed ceramics (e.max Press and Empress Esthetic), conventional feldspathic porcelain (Ceramco 3) and type III gold alloy. Material and methods: Intact cusps of extracted premolars were used for enamel specimens. Five disk samples were made for each of two heat-pressed ceramics groups, conventional feldspathic porcelain group and type III gold alloy group. Wear tests were conducted in distilled water using a pin-on-disk tribometer. The amount of enamel wear was determined by weighing the enamel specimens before and after wear tests, and the weight was converted to volumes by average density. The wear tracks were analyzed by scanning electron microscopy and surface profilometer to elucidate the wear characteristics. Results: 1. Ceramco 3 led to the greatest amount of enamel wear followed by Empress Esthetic, e.max Press and type III gold alloy. However, there was no significant difference between Ceramco 3 and Empress Esthetic (P>.05), and there were also no significant differences among Empress Esthetic, e.max Press and type III gold alloy (P>.05). 2. The average surface roughness of e.max Press after wear test was smallest followed by Empress Esthetic and Ceramco 3, but there was no significant difference between Empress Esthetic and Ceramco 3 (P>.05). 3. There were no significant differences among the depth of wear tracks of all the groups (P>.05). The group that showed the largest width of wear track was Ceramco 3 followed by Empress Esthetic, e.max Press and type III gold alloy. However, there was no significant difference between e.max Press and Empress Esthetic (P>.05), and there was also no significant difference between Empress Esthetic and Ceramco 3 (P>.05). Conclusion: Within the limits of this study, heat-pressed ceramics were not more abrasive than conventional feldspathic porcelain.

• Journal of Bio-Environment Control
• /
• v.25 no.1
• /
• pp.63-70
• /
• 2016

Water drainage from the open hydroponics often causes significant environmental pollution due to agrochemicals and loss of water and nutrients. The objectives of this study were to show the potential application of an irrigation schedule based on threshold values of volumetric substrate water content for tomato (Solanum lycopersicum L. 'Samsamgu') cultivation in a commercial hydroponic farm during spring to summer cultivation. This study was performed for minimizing effluent from coir substrate hydroponics using a frequency domain reflectometry (FDR) sensor-automated irrigation, as compared with an integrated solar-radiation (IR) and conventional timer-irrigation (TIMER) after transplanting. In results, no significant difference in daily irrigation volume was found among the treatments until 88 days after transplant (DAT). However, during the 88 to 107 DAT, the daily irrigation volume was in the order of IR (2125 mL) > TIMER (2063 mL) > FDR (1983 mL), and during the 108 to 120 DAT, it was in the order of IR (2000 mL) > TIMER (1664 mL) > FDR (1500 mL). The lowest drainage volume was observed in the FDR treatment with the order of IR (12~19%) > TIMER (4~12%) > FDR (0~7%) during the entire growing period. A lower irrigation volume in the FDR treatment after 88 DAT may be due to the sensor's detecting capacity for less water absorption by plant after completing fruit maturity with apical pruning and removal of lower leaves, while a higher irrigation volume in the IR treatment may be due to gradual increase in integrated solar-radiation amount as closer to summer season. There was no significant difference in plant growth and fruit yield among the treatments; however, a 11% and 18% of higher soluble sugar content was observed in the FDR than that of TIMER and IR treatment. respectively.