• 수산경영론집
• /
• 제47권2호
• /
• pp.1-14
• /
• 2016

This study applied the Stochastic Frontier Analysis to estimate which independent variable affects to efficiency of aquaculture household. This study used wage and facility scale as input variables, sales volume as an output variable to estimate efficiency. Also, the study used region, species, water quality to estimate technical inefficiency factors of the model. The data used for this study were obtained by the operating costs survey using 1:1 interview method. The study selected translog production model with technical inefficiency term estimated as half-normal distribution. In addition, the study used pearson and spearman correlation coefficient among efficiency estimating models. Also, the study analysed differences among estimated efficiencies through t-test, and showed us 0.1793 in species, 0.4677 between Geojae and Masan.

• Journal of the Korean Wood Science and Technology
• /
• 제44권6호
• /
• pp.821-827
• /
• 2016

This study evaluates the economic feasibility of industrializing fluidized bed dryer for wood particles. The theoretically required heat energy and energy efficiency were evaluated using a pilot scale fluidized bed dryer. When Mongolian Oak wood particles with 50% initial moisture content were dried in the fluidized bed dryer with air of $70^{\circ}C$ air circulating at 1.1-1.3 m/s for 30 minutes, the total theoretically required heat energy was 2,177 kJ. Of this, 1,763 kJ (approximately 81.0%) was used to heat the air flowing in from outside the dryer and 386 kJ (approximately 17.7%) was used to heat and remove water from the wood particles. Actual energy consumed was 7,560 kJ, giving energy efficiency of 28.8%. Thus, to industrialize a drying method such as fluidized bed drying, where the dryer volume is significantly larger than the volume of wood particles, it is necessary to minimize energy loss and maximize energy efficiency by designing the dryer size considering the amount of wood particles and choosing a suitable air circulation rate.

• Journal of Radiation Protection and Research
• /
• 제29권1호
• /
• pp.17-23
• /
• 2004

HPGe 검출기를 이용한 방사능 분석 시 효율교정을 위하여 통상적으로 사용하는 상용의 감마선 표준선원을 구입하는데 따르는 금전적인 문제와 장기간의 소요시간 등의 문제를 해결하기 위하여 본 연구에서는 표준선원을 직접 제작하였다. 측정하고자 하는 에너지 영역의 감마선을 방출하는 핵종이 포함된 시약을 원자로에서 조사시켜 방사화된 시약을 수용액 상태로 만들어 표준선원을 제조하였다. 제조한 방사선원을 상용의 표준선원과 비교하였으며 효율교정용 선원으로 사용할 수 있다는 것을 확인하였다. 또한 일상적인 방사능 분석과정에서 발생할 수 있는 표준선원과 측정 시료의 부피 차이에 따른 측정 효율의 변화정도를 조사하기 위하여 방사능 분석에서 사용되고 있는 다양한 측정용기에 대하여 표준선원의 부피 변화에 따른 효율의 변화 정도를 조사하였다.

• 동력기계공학회지
• /
• 제20권6호
• /
• pp.87-92
• /
• 2016

This research dealt with performance characteristics of OTEC system applying an ejector and additional pump. Each system using five kinds of working fluids was analyzed, and primary parameters with respect to entrainment ratio were examined: Turbine gross power, evaporation capacity, pump work, efficiency and volume flow ratio. The primary results were as following. The efficiency of ejector-pump OTEC system was dependent on entrainment of the ejector. The degree of efficiency change was different from applied working fluid, and amount of pump work was turned out to be primary factor affected system efficiency. Meanwhile, optimized entrainment ratio was different from applied working fluid since their different vapor density. System efficiency at optimized entrainmet ratio of each working fluid was around 5%, showing minor difference each other.

• 융합신호처리학회논문지
• /
• 제9권4호
• /
• pp.261-271
• /
• 2008

홀로그래픽 부피격자 커플러(VGC : volume grating coupler)는 높은 선택적 결합효율, 건식 제조공정, 콤팩트한 소자 제작이 가능하고 저렴하기 때문에 광연결 기술의 구현 및 응용에 매우 매력적인 소자로 간주되고 있다. 본 논문에서는 도파로형 광연결에 적용키 위한 $45^{\circ}$ 격자 경사각을 갖는 도파로 삽입형 입 출력 VGC를 DuPont사의 HRF600-20 홀로그래픽 포토폴리머를 이용하여 설계, 구현하기 위한 방법을 제안하였다. 그리고 제안한 VGC 소자의 유용성을 입증키 위해 동작파장이 각각 632.8nm 및 1550nm인 VGC를 제작하고 실험결과를 제시하였다. 실험결과 632.8nm 파장에서 동작하는 격자주기가 $0.5{\mu}m$인 단일 VGC의 경우 TE 편광에서 입력 결합효율은 86.6% 이상이고, 1550nm 파장에서 동작하는 격자주기가 $0.73068{\mu}m$인 $1\times2$ VGC의 입력 결합효율은 $\sim90.9%$의 특성을 나타내었다.

• 대한방사선기술학회지:방사선기술과학
• /
• 제22권1호
• /
• pp.5-11
• /
• 1999

This paper reviews recent major activities on instrumentation and methodology of PET. The performance of the PET instrumentation can be expressed by four physical characteristics, 1) spatial resolution, 2) coincidence resolving time, 3) energy resolution, and 4) detection efficiency. The physical and technical aspects of PET systems are briefly discussed along with these characteristics. Toward high resolution PET the recent trend has been to design multiple rings of densely packed detector arrays with scintillators. In order to satisfy the sampling requirement in reconstruction, continuous detector units has been developed. Iterative image reconstruction algorithms have received considerable attention for improvement of both the sampling requirement and image quality toward the stationary PET. Better resolving time improves the maximum true coincidence rate, which is also increased with more detectors placed in coincidence with each other. It suggests that volume PET is promising for enhancement of detection efficiency. The scattered coincidence event rate may be reduced by using detectors with better energy resolution. The use of interplane septa, however, takes over improvement of energy resolution in 2D PET. Energy resolution becomes an important factor for image quality under the condition of septa removal such as volume PET. Toward full utilization of emitting photons, 3D reconstruction incorporating oblique rays has been studied, and volume reconstruction algorithms have been developed. Practical volume PET systems impose heavy burden not only to detector sets and coincidence circuits, but also to computers in the memory requirements and the data processing. In conclusion, there have been many ingenious methods in development of PET instrumentation, which are based on unique capability of PET. They will be expected to overcome technical limitations, and to approach the fundamental limits.

• Bulletin of the Korean Chemical Society
• /
• 제35권10호
• /
• pp.2995-3000
• /
• 2014

A sensitive concentration method utilising modified gas-purge microsyringe extraction (GP-MSE) was developed. Concentration (reduction in volume) to a microlitre volume was achieved. PAHs were utilised as semivolatile analytes to optimise the various parameters that affect the concentration efficiency. The injection rate and temperature were the key factors that affected the concentration efficiency. An efficient concentration (75.0-96.1%) of PAHs was obtained under the optimised conditions. The method exhibited good reproducibility (RSD values that ranged from 1.5 to 9.0%). The GP-MSE concentration method enhances the volume reduction (concentration factor), leading to a low method detection limit ($0.5-15ngL^{-1}$). Furthermore, this method offers the advantage of small-volume sampling, enabling even the detection of diurnal hourly changes in the concentration of PAHs in ambient air. Utilising this method in combination with GC-MS, the diurnal hourly flux of PAHs from the gas phase of ambient air was measured. Indeed, the proposed technique is a simple, fast, low-cost and environmentally friendly.

• 한국광학회지
• /
• 제22권2호
• /
• pp.77-82
• /
• 2011

광음향 분광학 연구에 빈번히 사용되는 최소 부피 개방형 광음향 셀을 이용하여 광음향 신호를 측정할 경우 최소 부피 광음향셀의 밀폐상태는 광음향 신호의 재현성에 큰 영향을 미친다. 따라서 본 논문에서는 최소 부피 광음향 셀의 밀폐 효율을 높일 수 있는 고무오링 밀폐재를 적용한 구조를 설계하고 제작한 후, 제작한 구조체를 이용하여 다양한 재질의 고무 오링에 대한 광음향 신호를 주파수 별로 측정하고 분석하였다. 실험 결과 진공 그리스를 이용하여 광음향 셀을 밀폐하는 기존의 방식과 비교했을 때, 실리콘 고무 오링을 밀폐재로 사용하는 경우 광음향 신호의 진폭과 위상의 재현성이 각각 최대 53.4%와 80.4%까지 향상될 수 있음을 알 수 있었다.

• 한국태양에너지학회 논문집
• /
• 제22권3호
• /
• pp.1-10
• /
• 2002

Relatively being economical in installation and easy in operation, hot-air heating system has been generally used in greenhouse for heating system regardless of high cost in maintenance and uneven distribution of air temperature. Therefore to overcome the disadvantages in maintenance and in distribution of air temperature and to improve efficiency of heating system, this experimental study is performed. This experimental study aims to improve the character of uneven temperature distribution in vertical direction and to reduce energy consumption for heating in a greenhouse. The experiment had been performed to investigate change of thermal environment and effects on reducing energy consumption for heating in greenhouse by additional surface insulation and reduction of indoor-air volume that come by installing transparent vinyl membranes with different height in each house. The results show that there is a wide difference in oil-energy consumption between houses according to condition of surface insulation and change of indoor-air volume. Furthermore, the results show that the efficiency of dual surface is higher than that of change of indoor-air volume in terms of energy saving.

• Fisheries and Aquatic Sciences
• /
• 제14권2호
• /
• pp.138-147
• /
• 2011

Modeling fishing-gear systems is essential to better understand the factors affecting their movement and for devising strategies to control movement. In this study, we present a generalized mathematical modeling methodology to analyze fishing gear and its various components. Fishing gear can be divided into a finite number of elements that are connected with flexible lines. We use an algorithm to develop a numerical method that calculates precisely the shape and movement of the gear. Fishinggear mathematical models have been used to develop software tools that can design and simulate dynamic movement of novel fishing-gear systems. The tool allowed us to predict the shape and motion of the gear based on changes in operation and gear design parameters. Furthermore, the tool accurately calculated the swept volume of towed gear and the surrounding volume of purse-seine gear. We analyzed the fished volume for trawl and purse-seine gear and proposed a new definition of fishing effort, incorporating the concept of fished space. This method may be useful for quantitative fishery research, which requires a good understanding of the selectivity and efficiency of fishing gear used in surveys.