• 대한화학회지
• /
• 제47권1호
• /
• pp.79-86
• /
• 2003

볼타 전지에 대한 학생들의 오개념과 고등학교 화학 2 교과서에서 기술된 내용을 연구, 분석하였다. 볼타 전지에 대해 많은 학생들이 오개념을 가지고 있으며 몇몇 화학교과서의 경우 내용이 잘못 기술되어 있다는 것을 본 연구에서 밝혔다. 대부분의 교과서에는 볼타 전지의 초기 측정 전압이 왜 1.1V와 유사하며 시간이 지남에 따라 감소하는지에 대한 명확한 설명이 없다. 표준상태에서 볼타 전지의 기전력은 0.76V 이지만 어떤 교과서에는 다니엘 전지처럼 1.1V로 기술되어 있다. 대부분의 학생들은 볼타 전지를 배우거나 실험을 한 후에도 여전히 오개념을 가지고 있으며 이것은 적어도 다음 두 가지 요인에서 기인된다고 여겨진다. 첫째, 볼타 전지의 초기 측정 전위값이 다니엘 전지의 전위와 매우 유사하기 때문에 학생들이 혼동하여 오개념을 가진다. 둘째, 대부분 교과서의 볼타 전지 실험은 표준 상태가 아닌 조건에서 수행되도록 기술되어 있으므로 학생들이 실험을 하더라도 표준 상태 기전력값을 얻을 수 없기 때문에 여전히 오개념을 가지게 된다. 따라서 우리는 학생들의 오개념을 줄일 수 있는 개선된 볼타 전지의 실험 모형을 제안하였다.

• 대한화학회지
• /
• 제46권4호
• /
• pp.363-377
• /
• 2002

이 연구의 목적은 중${\cdot}$고등학교 교과서에 제시된 볼타전지에 대한 문제점을 분석하여 개선 방안을 제시하는데 있다. 이를 위하여 과학 교과서 중 관련 단원 내용을 분석하였으며 추출한 문제점을 실험을 통해 해결하였고 이를 바턍으로 교과서의 개선 방향을 제안하였다. 교과서 분석 결과, 화학전지의 작용 여부를 확인하는 방법, 아연판에서 수소 기체가 발생하는 이유에 대한 설명, 기전력에 대한 실험연구 결과, 전극용어 사용의 통일, 전류에 대한 설명 등 에 문제점이 있었다. 이러한 문제점을 해결하기 위한 방안을 제시하였다. 기전력에 대한 실험연구 결과, 기전력 측정 값에 대한 과학적인 설명은 각 전극에서의 산화환원 반응에 대한 기전력과 표준 환원 전위, 전기음성도, 일함수, 이온화 에너지 등과 같은 전극의성질을 함께 고려하여 설명해야 함을 알 수 있었다. 이는 볼타전지의 기전력이 여러 가지 요인에 영향을 받기 때문이다. 이와 같이 볼타전지의 기전력에 대한 정확한 설명은 용이 하지 않으므로 볼타전지는 화학전지의 도입 부분에서 역사적으로만 간단하게 기술하고 개념 설명은 다니엘 전지를 이용하여 기술하는 방향으로 교과서를 개선 할 것을 제한하였다.

• 반도체디스플레이기술학회지
• /
• 제17권3호
• /
• pp.10-16
• /
• 2018

In silicon crystalline PV (Photo Voltaic) industry, PV module or panel electric power is directly related to the companies' profit. Thus, many PV companies have invested and focused on R&D activities to get the higher module power. The main BOM (Bills of Material) on the module consists of PV solar cell, ribbon, EVA (Ethylene-Vinyl Acetate copolymer), glass and back sheet. Based on consistent research efforts on enhancing module power using BOM, there have been increase of around 5 watt per module every year as results. However, there are lack of studies related to enhancing accuracy of measurement. In this study, the enhancing on the metrology is investigated and the improvement shows actually contribution to company's profit. Especially, the measurement issues related to heat and to quasi state of bandgap diagram by EL(Electro Luminescence) are described in this study.

• 전기의세계
• /
• 제25권5호
• /
• pp.63-69
• /
• 1976

Among various types of photo-electric energy conversion element which can transfer solar energy into electric energy through the photo voltaic effect, Si solar cells were investigated on photoelectric characteristics, improvements of its efficiency and economical evaluation for its production cost. To study the above subjects, we decided best conditions on fabricating of thin film Si solar cell by epitaxial growth and knew that the thin solar cell by epitaxial growth was more efficient than that by diffusion process. And also higher photo voltaic output was obtained as a effect of SiO as antireflection coating by several methods, i.e. vacuum evaporating techniques of electrode to decrease the contact resistance and to form best ohmic contact, and concentration techniques of sun's ray by lenz or both-sided illumination through special structure for reflection using mirrors.

• 전기학회논문지
• /
• 제58권11호
• /
• pp.2175-2184
• /
• 2009

This paper describes operational analysis results of the DC micro-grid using detailed model of distributed generation. Detailed model of wind power generation, photo-voltaic generation, fuel-cell generation was implemented with the user-defined model of PSCAD/EMTDC software that is coded with C-language. The operation analysis was carried out using PSCAD/EMTDC software, in which the power circuit is implemented by built-in model and the controller is modelled by user-defined model that is also coded with C-language. Various simulation results confirm that the DC micro-grid can operate without any problem in both the interconnected mode and the islanded mode. The operation analysis result confirms that the DC micro-grid make it feasible to provide power to the load stably. And it can be utilize to develop the actual system design and building.

• Journal of Power Electronics
• /
• 제11권3호
• /
• pp.350-359
• /
• 2011

This paper describes the operational analysis results of a DC micro-grid using a detailed model of distributed generation. A detailed model of wind power generation, photo-voltaic generation and fuel cell generation was implemented with an userdefined model created with PSCAD/EMTDC software and coded in C-language. The operational analysis was carried out using PSCAD/EMTDC software, in which the power circuit is implemented by a built-in model and the controller is modeled by an user-defined model that is also coded in C-language. Various simulation results confirm that a DC micro-grid can operate without any problems in both the grid-tied mode and in the islanded mode. The operational analysis results confirm that the DC micro-grid makes it feasible to provide power to the load stably. It can also be utilized to develop an actual system design.

• 전기학회논문지
• /
• 제59권9호
• /
• pp.1626-1631
• /
• 2010

The characteristics of electric current for the voltaic cell are important for electric power applications. In this paper, an electrical equivalent model consist of three resisters and a capacitance for the Cu/NaCl solution/Zn electrochemical cell is proposed. The capacitance which exists in the Zn electrode/electrolytic interface increased according to Zn electrode area, but cannot affect almost in electric current. Complex impedance plot was used to analysis the interface effect for Zn/electrolyte. This result shows that the interface is similar with the electric transmission line. The short current measurements were conducted to investigate the effects of hydrogen peroxide, the watery sulfuric acid and NaCl aqueous solution. As the hydrogen peroxide increased, the electric current increased because the hydrogen gas being converted with the water. Also electric current increased significantly with increase of the hydrogen ion with the watery sulfuric acid and increased with increase of $Na^+$ ion and $Cl^-$ion in the NaCl electrolyte.

• 전기학회논문지
• /
• 제67권3호
• /
• pp.448-453
• /
• 2018

PV module protective film plays an important role in protecting the solar cell from external environment by anti-hydrolysis polyester, UV resistance and mechanical properties. The backsheet was manufactured by using Roll-to-Roll dry laminating process. The backsheet structure is composed of 3 layers, which are PE, PET, and Fluorine polymer films. In this study, we have experimented the variation of thermal conductivities depending on MgO inputs 10% to 25% in order to confirm the dependence of the module efficiencies. High thermal conductive backsheet can increase the module output power efficiency because the heat is dissipated by spreading out the internal heat. Long-term environment weatherability tests were conducted for confirming 25 year reliability in the field such as PCT, UV, and power efficiency degradations. As the evaluation result, high thermal conductivity can be effective for increase of power efficiency of solar panel by using thermal conductive MgO masterbatch.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2010년도 하계학술대회 논문집
• /
• pp.565-567
• /
• 2010

This paper proposes a new Maximum Power Point Tracking (MPPT) control algorithm for PV-Cell (Photo voltaic) based on Incremental Conductance MPPT algorithm. The ICN (Incremental Conductance method) algorithm is widely used due to the high tracking accuracy and adaptability to the rapidly changing isolation condition. In this paper, a modified ICN MPPT algorithm is proposed. This method adjusts automatically the step-size of reference to track the PV-Cell maximum power point, thus it improves the maximum power point tracking speed and accuracy.

• Current Applied Physics
• /
• 제18권12호
• /
• pp.1583-1591
• /
• 2018

We analysed perovskite $CH_3NH_3PbI_{3-x}Cl_x$ inverted planer structure solar cell with nickel oxide (NiO) and spiroMeOTAD as hole conductors. This structure is free from electron transport layer. The thickness is optimized for NiO and spiro-MeOTAD hole conducting materials and the devices do not exhibit any significant variation for both hole transport materials. The back metal contact work function is varied for NiO hole conductor and observed that Ni and Co metals may be suitable back contacts for efficient carrier dynamics. The solar photovoltaic response showed a linear decrease in efficiency with increasing temperature. The electron affinity and band gap of transparent conducting oxide and NiO layers are varied to understand their impact on conduction and valence band offsets. A range of suitable band gap and electron affinity values are found essential for efficient device performance.