• 한국전기전자재료학회논문지
• /
• 제13권3호
• /
• pp.220-226
• /
• 2000

The piezoelectric material for piezoelectric transformer needs the high electromechanical coupling factor( $k_{p}$) the piezoelectric constant( $d_{33}$) and the mechanical quality factor( $Q_{m}$)in order to obtain high voltage step-up ratio and low temperature rising. In this study the piezoelectric transformers were fabricated using Pb［$Zr_{0.45}$/ $Ti_{0}$48//L $u_{0.02}$(M $n_{1}$3//S $b_{2}$3/)$_{0.05}$］ $O_3$(PMS-PZT) and Pb［Z $r_{0.25}$/ $Ti_{0.375}$(M $g_{1}$3//N $b_{2}$3/)$_{0.375}$］ $O_3$+0.5wt%Mn $O_2$(PMN-PZT) ceramics. The piezoelectric properties of PMS-PZT and PMN-PZT were measured. The voltage set-up ratios of the piezoelectric transformers using PMS-PZT and PMN-PZT were the value of 15, 20 respectively under 100$_{KΩ}$ in Rosen type transformer.r.ormer.r.r.r.r.r.r.

• Journal of Electrical Engineering and Technology
• /
• 제12권4호
• /
• pp.1484-1494
• /
• 2017

We present a two-stage inverter with high step-up conversion ratio engaging modified finite-set Model Predictive Control (MPC) for utility-integrated photovoltaic (PV) applications. The anticipated arrangement is fit for low power PV uses, the calculated efficiency at 150 W input power and 19 times boosting ratio was around 94%. The suggested high-gain dc-dc converter based on Cockcroft-Walton multiplier constitutes the first-stage of the offered structure, due to its high step-up ability. It can boost the input voltage up to 20 times. The 3S current-source inverter constitutes the second-stage. The 3S current-source inverter hires three semiconductor switches, in which one is functioning at high-frequency and the others are operating at fundamental-frequency. The high-switching pulses are varied in the procedure of unidirectional sine-wave to engender a current coordinated with the utility-voltage. The unidirectional current is shaped into alternating current by the synchronized push-pull configuration. The MPC process are intended to control the scheme and achieve the subsequent tasks, take out the Maximum Power (MP) from the PV, step-up the PV voltage, and introduces low current with low Total Harmonic Distortion (THD) and with unity power factor with the grid voltage.

• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제52권10호
• /
• pp.458-463
• /
• 2003

In order to develope piezoelectric transformer for the ballast of fluorescent lamp, a new shape and electrode pattern of piezoelectric transformer has been investigated in this work. The composition of piezoelectric ceramics was 0.95Pb(Zr$_{0.51}$Ti$_{0.49}$)O$_3$+0.03Pb(Mn$_{1}$3/Nb$_{2}$3/)O$_3$+0.02Pb(Sb$_{1}$2/Nb$_{1}$2/)O$_3$. The sample prepared by this composition system showed the characteristics which has about 1200 of relative dielecric constant, 1100 of the mechanical quality factor, 0.53 of the electromechanical coupling coefficient, 320 pC/N of the piezoelectric constant d$_{33}$, 0.3 % of the dissipation factor. Diameter and thickness of disk-type piezoelectric transformer was 45 mm and 4 mm, respectively. The driving and generating electrode with their gap of 1mm were fabricated on the top surface. But the common electrode was fabricated on the whole bottom surface. The electrode surface ratio of driving and generating part on the top surface ranges from 1.4:1 to 3:1. We investigated the electrical characteristics with the variation of the electrode surface ratio of driving and generating part in the range of load resistance of 100 $\Omega$～70 k$\Omega$. The set-up voltage ratio of this piezoelectric transformer increases with increasing both the electrode surface of driving part and the load resistance. The set-up voltage ratio at no load resistance was more than 60 times. On the other hand, the efficiency decreases with increasing the electrode surface of driving part. In the case of the electrode surface of both 1.4:1 and 2:1, maximum efficiency showed above 97 % at load resistance of 2 k$\Omega$. However, in the case of the electrode surface of 3:1, maximum efficiency showed about 94 % at load resistance of 3 k$\Omega$.>.>.>.

• 센서학회지
• /
• 제5권3호
• /
• pp.9-16
• /
• 1996

본 논문에서는 고전압 임펄스전압 발생장치의 조작에 의하여 발생하는 과도전압을 측정할 수 있는 용량성분 압기를 실현하였다. 전장센서를 이용한 과도전압측정계는 고속응답의 평판형 전장센서와 광대역 전압버퍼로 구성되었으며, 사용된 전압버퍼(LH0033)의 입력임피던스는 $10^{12}{\Omega}$ 정도로 대단히 높다. 단위계단 응답특성을 파악하기 위하여 새로운 교정방법을 제안하고, 설치조건에 따른 분압비 오차를 검토하였으며, 분압비 오차를 0.5% 이내로 하기 위한 최적설치조건을 제시하였다. 교정실험으로부터 과도전압측정계의 응답시간은 약 15.78 ns이었으며, 주파수대역은 6.37 Hz에서 27.3MHz이다. 따라서 본 측정계로 과도과전압은 물론 상용주파수전압도 신호의 일그러짐 없이 측정이 가능하였다.

• Journal of Power Electronics
• /
• 제18권5호
• /
• pp.1513-1522
• /
• 2018

This paper proposes a new islanding detection method for inverter-based distributed generators by continuously injecting a negligible amount of 2nd order harmonic current. The proposed method adopts a proportional resonant (PR) controller for the output current control of the inverter, and a PR filter to extract the 2nd order harmonic voltage at the point of common coupling (PCC). The islanding state can be detected by measuring the magnitude ratio of the 2nd order harmonic voltage to the fundamental voltage at the PCC by injecting a 2nd order harmonic current with a 0.8% magnitude. The proposed method provides accurate and fast detection under grid voltage unbalance and load unbalance. The operation of the proposed method has been verified through simulations and experiments with a 5kW hardware set-up, considering the islanding test circuit suggested in UL1741.

• 센서학회지
• /
• 제7권4호
• /
• pp.293-299
• /
• 1998

본 연구의 목적은 22.9 kV-y 특별고압 배전선로상에서 가스절연개폐기를 이용한 전압측정장치의 개발에 있다. 본 논문에서 제안한 전압측정장치는 일종의 광대역 용량성 분압기로, 가스개폐기의 절연붓싱에 설치한 검출전극, 임피던스 정합회로 및 전압버퍼로 구성되며, 기설의 가스절연개폐기에 구조 변경 없이 설치될 수 있다. 제작된 전압측정장치는 교정과 적용성 평가를 위하여 25.8 kV, 400 A 가스절연개폐기에 설치되었으며, 5 ns의 상승시간을 갖는 직각파 발생기로 주파수 응답특성을 조사하였다. 실험결과로부터 본 전압측정장치의 주파수 대역은 1.35 Hz에서 약 13 MHz이었으며, 60 Hz 상용주파수 전압에서 분압비 오차는 0.2% 이하였다. 또한 상용주파수 전압과 비진동성 충격전압에 대한 분압비와의 편차는 0.7% 이하로 나타났다.

• Journal of Power Electronics
• /
• 제15권1호
• /
• pp.31-38
• /
• 2015

In this paper, a buck-boost type battery charger is developed for charging battery set with a lower voltage. This battery charger is configured by a rectifier circuit, an integrated boost/buck power converter and a switched capacitors circuit. A boost power converter and a buck power converter sharing a common power electronic switch are integrated to form the integrated boost/buck power converter. By controlling the common power electronic switch, the battery charger performs a hybrid constant-current/constant-voltage charging method and gets a high input power factor. Accordingly, both the power circuit and the control circuit of the developed battery charger are simplified. The switched capacitors circuit is applied to be the output of the boost converter and the input of the buck converter. The switched capacitors circuit can change its voltage according to the utility voltage so as to reduce the step-up voltage gain of the boost converter when the utility voltage is small. Hence, the power efficiency of a buck-boost type battery charger can be improved. Moreover, the step-down voltage gain of the buck power converter is reduced to increase the controllable range of the duty ratio for the common power electronic switch. A prototype is developed and tested to verify the performance of the proposed battery charger.

• 마이크로전자및패키징학회지
• /
• 제16권1호
• /
• pp.39-43
• /
• 2009

CCFL 구동용 인버터 모듈 개발을 위해, 내부전극 층수에 따른 Rosen-type 적층형 압전변압기를 제작하였으며, 내부전극 층수에 따른 출력 및 효율을 분석하였다. 압전변압기용 원료로는 PZT계 상용원료를 사용하였으며 구동회로는 Half-bridge 방식을 적용하여 압전인버터 모듈을 제작하였다 제작된 압전인버터 모듈의 입력전압은 12.5 V이고 스위칭 주파수는 104.3 KHz로서 압전인버터 구동시 약 100배의 승압비를 얻었으며, 효율은 87%이다.

• 전기전자학회논문지
• /
• 제3권2호
• /
• pp.161-167
• /
• 1999

표준 2-poly CMOS 공정을 이용하여 3-입력 neuron-MOSFET의 인버터와 증가형 소자를 사용한 3비트 D/A 변환기를 설계 제작하였다. Neuron-MOSFET를 사용한 인버터의 전압전달 특성곡선과 잡음여유를 일반 CMOS 인버터와 같은 방법으로 측정분석하였다. 결합계수가 전압전달 특성곡선과 잡음여유에 미치는 영향을 이론적으로 계산하여 neuron-MOSFET 인버터의 게이트 산화층 두께와 입력게이트 레이아웃에 대한 설계 가이드라인을 설정하였다. 입력게이트 중 하나를 제어게이트로 사용하므로 offset전압이 없는 neuron-MOSFET D/A 변환기를 설계 제작할 수 있었다.

• 조명전기설비학회논문지
• /
• 제19권5호
• /
• pp.17-22
• /
• 2005

본 연구에서는 직경이 50[mm], 두께가 4.5[mm]인 디스크형 압전 변압기의 구동부와 발전부의 전극 면적비를 각각 1.4:1, 2:1 및 3:1로 분할하여, 부하 저항을 변화(100${[\Omega]}\~70{[k\Omega]}$)시키면서 전기적 특성을 측정하고, 이를 토대로 한 압전변압기의 승압비에 관한 메카니즘을 정량적 및 정성적으로 해석하였다.