• Proceedings of the KIPE Conference
• /
• 2001.07a
• /
• pp.487-490
• /
• 2001

Power Quality and Reliability are becoming important issues for critical and sensitive loads. This paper describes the Line Interactive UPS with the function of Voltage Compensator that is 'Line interactive Dynamic Voltage Restorer(LIDVR). The main purpose of a LIDVR is to compensate for voltage sag(dip), outage and overvoltage. The overall system consists of three controller 1) current controller with prediction 2) voltage controller and 3) proposed variable DC LINK controller. The variable DC LINK control technique using the LIDVR protects DC LINK from overflowing the input current. The simulation results are depicted in this paper to show the effect of this proposed system.

• Proceedings of the KIEE Conference
• /
• summer
• /
• pp.351-353
• /
• 2004

In recent years, customers and power supplies are interested in power quality. Demands of customers are change from standard quality of distribution power system to various high quality of distribution power system. so, it is necessary to apply power quality compensator. in our project, we develop the UPQC(Unfied Power Quality Compensator of 45kVA which compensates power factor and voltage sag, interruption. it is very frequently occurred power quality $problems^{[1-3]}$ As a series and shunt compensator, UPQC consists of two inverters with common do link capacitor bank. It compensates the current quality in the shunt part and the voltage quality in the series part. In this paper, we present the design and control algorithm for 4SkVA UPQC system. As a control algorithm is implemented by digital controller, we consider sample-and-hold of signals. In this simulation, we use EMTDC/PSCAD V3.0 software which can simulate instantaneous voltage and current.

• Proceedings of the KIEE Conference
• /
• 2002.11d
• /
• pp.218-220
• /
• 2002

본 연구에서는 정상상태에서 고조파 전류와 순시전압 강하에 대한 보상성능이 우수한 3상 전압 Sag 및 고조파 전류 보상 시스템을 제안하고 있다. 제안된 시스템의 보상 알고리즘으로는 구현하기 쉽고 간단한 직접 필터링 알고리즘이 사용되고 있으며 하이브리드 직렬형 능동전력필터에 적용하였다. 제안된 알고리즘은 전원전압이 순간적으로 왜형과 sag가 발생되더라도 비선형 부하에 인가되는 전압은 일정한 정현파로 제어 가능하며 동시에 전원전류의 고조파와 기본파 무효전류도 보상 가능하다. 정상상태와 과도상태에서 전력전자전용 시뮬레이터인 PSIM에 의해 제안된 이론의 타당성을 입증하였다.

• Proceedings of the KIEE Conference
• /
• 2009.04b
• /
• pp.118-120
• /
• 2009

본 논문에서는 직접 전력변환방식의 단상 sag/swell 보상기를 구현하였다. 제안된 보상기는 정현파 입력/ 출력 필터, 직렬연결 변압기와 dc 링크 커패시터부가 없는 단상 back-to-back PWM컨버터로 구성되어 있다. 이 보상기의 장점은 dc-link 진해 커패시터가 제거되어 전력회로부가 간단하게 구현되어 향상된 신뢰성 및 내구성을 확인 할 수 있으며 동시에 단상 전압 sag/swell을 보상하며 스위칭 손실을 줄이는 간단한 PWM 방법을 들 수 있다. 더구나, 제안된 방법은 일반적인 직접 전력변환방식에서 요구되어지는 복잡한 4-step 전류 방법이 필요 없는 간단한 전류제어방법을 채용할 수 있는 구조이며 제안된 보상기의 구조와 PWM 방법의 타당성을 프로토타입 하드웨어를 제작하여 실험결과로 보상기의 우수성을 확인하였다.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.58 no.5
• /
• pp.936-943
• /
• 2009

Dynamic voltage restorer(DVR) is now more preferable enhancement than other power quality enhancement in industry to reduce the impact of voltage faults, especially voltage sags to sensitive loads. The main controllers for DVR consists of PLL(phase locked loop), compensation voltage calculator and voltage compensator. PLL detects the voltage faults and phase. Compensation voltage calculator calculates the reference voltage from the source voltage and phase. With calculated compensation voltage from PLL, voltage compensator restores the source voltage. If PLL detect ideal phase, compensation voltage calculator calculates ideal compensation voltage. Therefore, PLL for DVR is very important. This paper proposes the new method of PLL in DVR. First, the power circuit of DVR system is analyzed in order to compensate the voltage sags. Based on the analysis, new PLL for improving transient response of DVR is proposed. The proposed method uses band rejection filter(BRF) at q-axis in synchronous flame. In order to calculate compensation voltage in commercial instruments, the PQR theory is used. Proposed PLL method is demonstrated through simulation using Matlab-Simulink and experiment, and by checking load voltage, confirms operation of the DVR

• Journal of Electrical Engineering and Technology
• /
• v.13 no.2
• /
• pp.550-558
• /
• 2018

This paper presents the current limit strategy of voltage controller of delta-connected H-bridge static synchronous compensator (STATCOM) under an unbalanced voltage fault event. When phase to ground fault happens, the feasibility to heighten the magnitude of sagging phase voltage is considered by using symmetric transformation method in delta-structure STATCOM. And the efficiency to cover the maximum physical current limit of switching device is considered by using vector analysis method that calculate the zero sequence current for balancing the cluster energy in delta connected H-bridge STATCOM. The result is simple and obvious. Only positive sequence current has to be used to support the unbalanced voltage sag. Although the relationship between combination of the negative sequence voltage with current and zero sequence current is nonlinear, the more negative sequence current is supplying, the larger zero sequence current is required. From the full-model STATCOM system simulation, zero sequence current demand is identified according to a ratio of positive and negative sequence compensating current. When only positive sequence current support voltage sag, the least zero sequence current is needed.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.6 no.2
• /
• pp.173-179
• /
• 2001

This paper represents the control algorithm of the instantaneous voltage sag corrector for the power quality enhancement in distribution line. Especially, a novel detection technique of the symmetrical components is proposed for the analysis of the three-phase unbalanced and asymmetrical problems caused by the single line ground fault which is he most frequent event. This proposed method is based on the simple calculation and the control references of the symmetrical components for voltage compensation can be described as dc value without any other phase detection procedure. And also, for the generation of the reference voltages, the UF and MF defined by IEC is considered. Using this proposed control algorithm, the compensator has the fast dynamic characteristics and the THD of the compensated voltage waveform is very low. Finally, the validity of the proposed algorithm is proved by the PSCAD/EMTDC simulation and experimental results.

• Proceedings of the KIPE Conference
• /
• 2009.11a
• /
• pp.146-148
• /
• 2009

본 논문에서는 새로운 Quasi Z-소스 순간전압 Sag-Swell 보상기를 제안한다. 제안된 시스템은 Quasi Z-소스 교류-교류 컨버터를 기반으로 하며, 입력단과 출력단이 공통 접지이며, 연속적인 입력전류로 동작하는 특징을 가지고 있다. 또한 평균치 제어 기법의 단점을 보완하기 위한 방법으로 실시간 샘플링 검출기법을 이용한 알고리즘을 적용하여 샘플링 구간 동안 평균치 값을 계산해서 순간전압 변동을 검출해 내는 기법을 적용했다.

• Proceedings of the KIPE Conference
• /
• 2008.06a
• /
• pp.69-71
• /
• 2008

Recently, the interest on power quality has been hot issue because the equipments cause voltage disturbance and become more sensitive to the voltage disturbance. The DVR(Dynamic Voltage Restorer) is one of the Custom Power Device that can compensate the voltage. DVR operates as a series connected compensator whose output voltage can be controlled system voltage. And the magnitude of compensation voltage is limited by the characteristics of system and load. Compensation capability of DVR was simulated by EMTDC under several condition. This paper analyzed effect of DVR's compensation at power quality test center which has SSFG(Sag, swell, and Flicker Generator, CPDs(SSTS, DVR, DSTATCOM), and loads.

• Proceedings of the KIPE Conference
• /
• 2011.11a
• /
• pp.247-248
• /
• 2011

본 논문에서는 10kW급 3상 새그전압 보상기를 구현함에 있어 필요한 알고리즘인 새그 검출기법, 양방향 싸이리스터를 통한 계통 차단, RMS 출력전압 제어기법을 논의한다. 시작품을 제작하여 실험을 거쳐 타당성 및 안정성을 검증하였다.