• 대한전기학회논문지:전기기기및에너지변환시스템부문B
• /
• 제54권1호
• /
• pp.1-8
• /
• 2005

This paper presents a characteristic analysis of switched reluctance motor (SRM) considering switching control method and DC link voltage ripple by using time-stepped voltage source finite element method in which the magnetic field is combined with drive circuit. We also examine the influence of freewheeling diodes and DC link voltage ripple on the performance of the SRM such as torque ripples and radial force on the surface of the teeth. The freewheeling diodes and DC link voltage ripples must be taken into account to predict the performance of SRM.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2004년도 하계학술대회 논문집 B
• /
• pp.872-874
• /
• 2004

This paper presents a charcteristcic analysis switched reluctance motor (SRM) considering hard chopping and DC link voltage ripple by using time-stepped voltage source finite element method in which the magnetic field is combined with drive circuit. We also examine the influence of freewheeling diodes and DC link voltage ripple on the performance of the SRM such as torque ripples and radial force on the surface of the teeth The freewheeling diodes and DC link voltage ripples must be taken into account in predicted the performance of SRM

• 조명전기설비학회논문지
• /
• 제28권9호
• /
• pp.1-7
• /
• 2014

Brushless Direct Current(BLDC) Motor is essential to measure a rotor position because of that this motor type needs to synchronize the rotor's position and changeover phase current instead of a brush and commutator used on the existing dc motor. Recently, many researches have studied on sensorless control drive for BLDC motor. The conventional control methods are a compensation value dq, Kalman filter, Fuzzy logic, Neurons neural network, and the like. These methods has difficulties of detecting BEMF accurately at low speed because of low BEMF voltage and switching noise. And also, the operation is long and complex. So, it is required a high-performance microprocessor. Therefore, it is not suitable for a small BLDC motor sensorless drive. This paper presents control methods suitable for economic small BLDC motor sensorless drive which are an improved design of the BEMF detection circuit, simplifying a complex algorithm and computation time reduction. The improved motor sensorless drive is verified stability and validity through being designed, manufactured and analyzed.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2003년도 춘계종합학술대회
• /
• pp.509-513
• /
• 2003

본 논문에서는 임베딩 구동 동기화를 이용한 비밀통신회로를 구성하고 검증하였다. 임베딩 구동 동기는 Chua 회로의 미분방정식의 세 가지 상태 변수 중 전류성분과 같이 동기화와 신호 합성에 어려운 상태변수를 전압 성분으로 분리하여 각각의 CNN 성분으로 다룰 수 있는 SC-CNN을 이용하여 구성하였다. Embedding Drive Synchronization(임베딩 구동동기)은 구동동기에서 한 미분상태변수를 완전히 대체하지 않고 동일한 시스템상의 일부 성분으로 구성하여 동기화를 이루고 비밀통신에 적용한 후 그 결과를 검증하였다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2009년도 제40회 하계학술대회
• /
• pp.863_864
• /
• 2009

Design and drive characteristics of SR drive for hydraulic pump system using passive converter is presented in this paper. In oder to get the high performance, a simple passive circuit is added in the front-end of a conventional asymmetric converter, which consists of three diodes and one capacitor. This passive converter has the high demagnetization voltage, to reduce the demagnetization time. Futhermore optimal turn-off angle for the proposed passive converter is proposed. According to motor speed and current, an optimal turn-off angle can be achieved by look-up table to reduce torque ripple. The characteristic of proposed hydraulic pump system using passive converter is verified by simulation and experimental results.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1995년도 추계학술대회 논문집 학회본부
• /
• pp.316-320
• /
• 1995

This paper proposes two base/gate drive suppression methods of NPC inverters. The first is the output current polarity detection type, which can be regarded as an extension of Joshi and Bose's method for ordinary inverters. But this method has difficulties in implementation. The second is the output voltage polarity detection type, which is easier to implement than the former. The base/gate drive suppression methods have the merit that it does not have the dead time problem, reduces the power loss of the driving circuit, and others.

• 전력전자학회논문지
• /
• 제24권2호
• /
• pp.127-133
• /
• 2019

This paper proposes a restarting method for extended electromotive force (EEMF)-based sensorless permanent magnet synchronous motor (PMSM) drive systems. The sensorless PMSM drive systems generally estimate the rotor speed and angle based on EEMF. However, if the inverter is stopped while the PMSM is rotating, the initial rotor speed and angle are required for restart. Therefore, the proposed restarting method estimates the initial rotor speed and angle using the short-circuit current generated by applying zero voltage vector from the inverter. The validity of the proposed method is verified by simulation and experimental results.

• 전력전자학회논문지
• /
• 제17권3호
• /
• pp.213-221
• /
• 2012

In a PWM inverter-fed IPMSM (Interior Permanent Magnet Synchronous Motor) drive, a dead time is inserted to prevent a breakdown of switching device caused by the short-circuit of DC link. This distorts the inverter output voltage resulting in a current distortion and torque ripple. In addition to the dead time, nonlinearity exists in switching devices of the PWM inverter, which is generally dependent on operating conditions such as the temperature, DC link voltage, and current. The voltage disturbance caused by the dead time and inverter nonlinearity directly influences on the inverter output performance, and it is known to be more severe at low speed. In this paper, a new compensation scheme for the dead time and inverter nonlinearity under the parameter variation is proposed for a PWM inverter-fed IPMSM drive. The overall system is implemented using DSP TMS320F28335 and the validity of the proposed algorithm is verified through the simulation and experiments.

• 전기전자학회논문지
• /
• 제14권2호
• /
• pp.51-57
• /
• 2010

대형 TFT LCD 판넬의 감마보정전압을 구동하기 위한 레일-투-레일 고전압 CMOS 완충 증폭기를 제안하였다. 이 회로는 단일 전압하에서 동작하고 18V 전압원에서 0.5mA 의 전류소비특성을 나타내며 8비트/10비트 고해상도 TFT LCD 판넬의 감마보정 전압 구동을 위하여 설계하였다. 이 회로는 높은 slew rate, 0.5mA의 정적 전류특성을 나타내며 1k$\Omega$의 저항성/용량성 부하구동 능력을 가지고 있다. 또한 넓은 출력 공급범위를 지니며, 5mA의 출력 정전류를 내보낼 경우 50mV미만의 옵셋전압 특성을 가진다. 또한, 용량성 부하 구동시 입력기준 옵셋전압이 2.5mV 미만인 좋은 특성을 나타낸다. 본 논문에서는 넓은 스윙입력범위와 출력 동작 범위을 얻기 위해 전류미러형 n-채널 차동증폭기, p-채널 차동증폭기, AB-급 푸쉬-풀 출력단, 히스테리시스 비교기를 사용한 입력레벨 검출기 등을 사용하였다. 제안된 회로는 고전압 디스플레이 구동 IC에 사용하기 위해 0.18um 18V 고전압 CMOS 공정기술에 의해 제작되었다. 제안된 회로는 8~18V의 공급 전압 범위에서 동작한다.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2005년도 전력전자학술대회 논문집
• /
• pp.33-35
• /
• 2005

We propose an improved sensorless drive method of Switched Reluctance Motors using impressed voltage pulses. Conventional impressed voltage pulse method has a problem of phase delay because of low -pass filter. So In this paper we propose an unproved sensorless driving method based on the impressed voltage pulse using new phase-shift circuit technique that overcomes the phase delay and start-up problem.