• Nuclear Engineering and Technology
• /
• 제51권2호
• /
• pp.377-383
• /
• 2019

Targeting at simulating the application of thorium-uranium (TU) fuel in the CANDU-6 reactor, this paper analyzes the process using the code DRAGON/DONJON where the discrete TU fuel pins are applied in the CANDU-6 reactor under the time-average equilibrium refueling. The results show that the coolant void reactivity of the assembly analyzed in this paper is lower than that of 37-element bundle cell with natural uranium and 37-element bundle cell with mixed TU fuel pins; that the max time-average channel/bundle power of the core meets the limits - less than 6700kW/860 kW; that the fuel conversion ratio is higher than that of the CANDU-6 reactor with natural uranium; and that the exit burnup increases to 13400 MWd/tU. Thus, the simulation in this paper with the fuel in the 37-element bundle cell using discrete TU fuel pins can be considered to be applied in CANDU-6 reactor with adequate modifications of the core structure and operating modes.

• Asian Pacific Journal of Cancer Prevention
• /
• 제16권13호
• /
• pp.5325-5329
• /
• 2015

Farnesiferol C is a natural compound with various anti-cancer properties that belongs to the class of sesquiterpene coumarins. However, the low bioavailability of farnesiferol C limits its therapeutic potential. Here, we overcame this problem utilizing dendrosome nano-particles and evaluated the anti-cancer effect of dendrosomal farnesiferol C (DFC) on the AGS gastric cancer cell line. The 3-(4,5-dimethyl-thiazol-2yl)-2,5- diphenyl tetrazolium bromide (MTT) assay and reverse transcriptase-polymerase chain reaction (RT-PCR) were respectively used to detect the anti-proliferative properties of DFC and expression ratio of Bax/Bcl-2 as a hallmark of apoptosis. Compared to the void farnesiferol C (FC), our data showed that DFC significantly suppresses the proliferation of AGS cells in a time- and dose-dependent manner (P<0.01). Also, DFC meaningfully increased the expression ratio of Bax/Bcl-2 in AGS cells (P<0.01). The findings demonstrate that our nano-based formulation of farnesiferol C could be considered as a potential therapeutic agent in cancer targeting.

• Nuclear Engineering and Technology
• /
• 제48권5호
• /
• pp.1109-1119
• /
• 2016

Although, the direct use of spent pressurized water reactor (PWR) fuel in CANda Deuterium Uranium (CANDU) reactors (DUPIC) cycle is still under investigation, DUPIC cycle is a promising method for uranium utilization improvement, for reduction of high level nuclear waste, and for high degree of proliferation resistance. This paper focuses on the effect of DUPIC cycle on CANDU reactor safety parameters. MCNP6 was used for lattice cell simulation of a typical 3,411 MWth PWR fueled by $UO_2$ enriched to 4.5w/o U-235 to calculate the spent fuel inventories after a burnup of 51.7 MWd/kgU. The code was also used to simulate the lattice cell of CANDU-6 reactor fueled with spent fuel after its fabrication into the standard 37-element fuel bundle. It is assumed a 5-year cooling time between the spent fuel discharges from the PWR to the loading into the CANDU-6. The simulation was carried out to calculate the burnup and the effect of DUPIC fuel on: (1) the power distribution amongst the fuel elements of the bundle; (2) the coolant void reactivity; and (3) the reactor point-kinetics parameters.

• 대한기계학회논문집B
• /
• 제34권5호
• /
• pp.471-479
• /
• 2010

다른 세장비에 따른 단일 사각 마이크로 채널 내의 이상유동연구를 수행하였다. 본 연구에서는 대략 넓이가 $500\;{\mu}m$ 이며 수력직경이 각각 490, 322, $143\;{\mu}m$ 인 사각 마이크로채널 내에서의 물-질소 유동에 대한 실험이 수행되었다. 또한, 고속카메라와 장거리 현미경을 통해 이상유동양식을 가시화하였다. 본 연구는 이상유동 중 기포류에 중점을 두었으며 가시화 결과를 통해 기포의 속도, 기포의 길이, 관 내 기포의 개수, 기공률을 산출하였고 단위 셀 모델을 기반으로 늘어진 단일 기포의 압력강하를 해석하였다. 실험을 통해 기포의 속도, 기공률, 단일 기포의 압력강하가 각각 겉보기 속도와 체적건도, 세장비와 연관이 있음을 확인하였으며, 사각 마이크로 채널 내 늘어진 단일 기포의 압력강하에 대한 상관식을 개발하였다.

• Current Photovoltaic Research
• /
• 제4권4호
• /
• pp.145-149
• /
• 2016

Characteristic of aluminum-silicon alloy paste which is applied on the rear side of PERC cell was investigated. The paste was made by aluminum-silicon alloy with eutectic composition to avoid the formation of void which is responsible for the degradation of the open-circuit voltage. Also, the glass frit component of the paste was changed to improve the adhesion of aluminum-silicon paste. We observed the formation of void and local back surface field between aluminum electrode and silicon base by SEM. The light IV, quantum efficiency and reflectance of the solar cells were characterized and compared for each paste.

• 한국태양에너지학회:학술대회논문집
• /
• 한국태양에너지학회 2011년도 추계학술발표대회 논문집
• /
• pp.303-306
• /
• 2011

Although PV module manufacturing and its structure are simple, the semi-permanent products can be used out doors for more than twenty years. Therefore it is need to choose proper materials and optimize manufacturing process. This paper suggest that factors of degradation need to be studied to achieve a more understanding of PV module Degradation rates and material failure. Nowadays durability of the PV Module is very important to sustain output safety for obtaining reliability. This paper is about the experiment that soldering uniformity of soldering process and to make least void from soldering process. From This study soldering flux residue and soldering method is main factor to form void blocked soldering uniformity and by using this.

• 대한의용생체공학회:의공학회지
• /
• 제42권6호
• /
• pp.251-258
• /
• 2021

Hyaluronic acid (HA) microspheres (MSs) crosslinked with polyethylene glycol diglycidyl ether (PEGDE) are prepared using a simple fluidic device (SFD) to investigate the optimized parameters. A solution mixture of PEGDE in 2-methyl-1-propanol was prepared as a continuous phase in SFD. HA solutions of 1 wt% concentration were introduced into SFD as a discontinuous phase. The HA solution prepared by stirring for more than 48 h exhibited spherical MSs at the needle tip inside the ring cap. As the flow rate of the continuous phase increased from 0.7 to 1.9 mL/min, the diameter of the MS decreased from 173±36 ㎛ to 129±13 ㎛. Although the PEGDE concentration in the range of 0.2 to 1.8 vol% did not affect the diameter of the MS, the microstructure of MS, consisting of inner hollow void and wall, was changed. The inner void and wall size decreased and increased from 79.5 ㎛ to 57.2 ㎛ and from 10.3 ㎛ to 21.4 ㎛, respectively, with increasing PEGDE concentration from 0.2 vol% to 1.8 vol%. FT-IR peaks located around 2867 cm^-1 and 1088 cm^-1 indicated that the HA MS prepared at different PEGDE concentrations were chemically crosslinked. The HA MSs containing different PEGDE concentrations exhibited quantitative cell viability of more than 98%. L-929 cells adhered well to the HA MSs and proliferated continuously with increasing culture time to 48 h regardless of PEGDE concentration, implying that the HA MSs are clinically safe and effective.

• 한국농공학회지
• /
• 제40권2호
• /
• pp.123-129
• /
• 1998

Compressibility and permeability properties are the most important input parameters necessary to assess the suitability of core materials in seepage control system construction. To achieve this objective, an experimental investigation was conducted in the laboratory. For the bentonite-soil/sand mixes, consolidation and permeability tests were carried out in the conventional consolidation cell, 6Omm in diameter and 2Omm in height, was modified to perform a falling head type permeability test. From the results, the normalized relationship with respect to void ratio at liquid-limit state $(e_L)$, and the changes of compressibility and permeability for various bentonite-soil/sand mixes were presented. This approach will be helpful in proportioning mixes and predicting corresponding changes in engineering behavior. And it is possible to proportion a mix to arrive at the required compressibility without affecting the permeability.

• Toxicological Research
• /
• 제13권4호
• /
• pp.401-408
• /
• 1997

Adult male ICR mice were exposed to methylmercuric chloride (CH$_3$HgCI) through drinking water for 80 days. The distribution of mercury in the kidney, liver, spleen and cerebellum of the mouse was examined according to a autometallographic silver-enhancement technique based on a physical development process which renders mercury deposit visible. Grains of mercury traces were located in the proximal convoluted tubules. Lesser staining of the grains was seen in the collecting tubules of medulla. The glomerular basement membrane was void. In the liver, mercury accumulations were present primarily in the hepatocytes around portal area containing interlobular bile duct, artery and portal vein. Also grains of mercury traces were accumulated in the white pulp of the spleen and Purkinje cell layer of the cerebellum.

• 한국전기전자재료학회논문지
• /
• 제35권6호
• /
• pp.603-609
• /
• 2022

Passivation quality is mainly governed by epitaxial growth of crystalline silicon wafer surface. Void-rich intrinsic a-Si:H interfacial layer could offer higher resistivity of the c-Si surface and hence a better device efficiency as well. To reduce the resistivity of the contact area, a modification of void-rich intrinsic layer of a-Si:H towards more ordered state with a higher density is adopted by adapting its thickness and reducing its series resistance significantly, but it slightly decreases passivation quality. Higher resistance is not dominated by asymmetric effects like different band offsets for electrons or holes. In this study, multilayer of intrinsic a-Si:H layers were used. The first one with a void-rich was a-Si:H(I₁) and the next one a-SiO_x:H(I₂) were used, where a-SiO_x:H(I₂) had relatively larger band gap of ~2.07 eV than that of a-Si:H (I₁). Using a-SiO_x:H as I₂ layer was expected to increase transparency, which could lead to an easy carrier transport. Also, higher implied voltage than the conventional structure was expected. This means that the a-SiO_x:H could be a promising material for a high-quality passivation of c-Si. In addition, the i-a-SiO_x:H microstructure can help the carrier transportation through tunneling and thermal emission.