• International Journal of Precision Engineering and Manufacturing
• /
• v.8 no.2
• /
• pp.49-53
• /
• 2007

In this study, we investigated experimentally the potential of a planer positioning mechanism with three degrees of freedom using a flexure guide and an electromagnetic linear motor. The goal was to produce a multi-axis positioning system with nanometric resolution over a 1-mm stroke. An $X-Y-\theta$ stage was designed based on previous results from a single-axis prototype and was constructed with a flexure guide mechanism and voice coil motor type linear actuators. We examined the necessity of a driving method and control system to ensure high resolution for multi-axis positioning. Experiments were conducted to evaluate the performance, and the results confirmed the mechanism's potential; fine point-to-point (PTP) positioning was achieved over a 1-mm stroke, with a resolution of 2 nm for translation in X-Y and 0.01 asec for yaw in $\theta$.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.47 no.1
• /
• pp.59-65
• /
• 2019

In this study, optimal design of direct-drive VCMs (Voice Coil Motor) for a missile fin actuator is carried out. The torque performance and the characteristics of the VCM are predicted by commercial electromagnetic analysis software, ANSYS Maxwell. The optimal design is obtained at the minimum and maximum actuating angles where the aerodynamic load acting on the fin is the largest in the operating range. The critical variables of the actuator is designed and the RSM (Response Surface Method) is used for the optimization. The response surface model consists of second-order functions and its experimental points are selected by a central composite design. This design is widely used for fitting a second-order response surface. The adjustment regression coefficients is computed for adequacy checking of the response surface model. Finally, the torque values obtained by the RSM and the ANSYS Maxwell are shown in good agreement.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.10
• /
• pp.6925-6931
• /
• 2015

LED(Light Emitting Diode) is used in various filed like a display because of low power consuming, long life span, high brightness, rapid response time and environmental-friendly characteristic. General fabrication method is combination blue light LED chip with yellow fluorescent substance. Because this way is suitable for industry field in terms of convenience, economic, efficiency. In white light LED packaging process, encapsulation process that is dispensing fluorescent substance with silicon to blue light LED chip is most important. So, in this paper we develop EHD pump system using voice coil motor and electrostatic pump for dispensing fluorescent substance. For these things we conduct basic test about liquid surface profiles by voltage and process time. Through this data we decide optimal process condition and verify the optimal condition using design of experiment method. And to confirm uniformity of the condition, we conduct repeat dispensing test.

• Proceedings of the KSME Conference
• /
• 2005.11a
• /
• pp.156.2-156.2
• /
• 2005

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2013.05a
• /
• pp.467-468
• /
• 2013

• Journal of Institute of Control, Robotics and Systems
• /
• v.15 no.11
• /
• pp.1071-1075
• /
• 2009

This article describes a robust control method by using peak control of a sensitivity function in the state-feedback control systems. This method apparently reduces the peak, and as a result makes closed loop systems more stable. The designed closed loop systems also make the response to an external step disturbance more fast with a lower undershoot. At the conclusion, it is verified that the proposed method enhances robust stability and robust performance to parametric uncertainties through $\mu$-plot.

• 제어로봇시스템학회:학술대회논문집
• /
• 1994.10a
• /
• pp.605-610
• /
• 1994

This paper discusses the solution to the precise positioning control problem applied to a simple model of a dual stage or redundant positioner. The dual stage actuator presented here uses a VCM(Voice Coil Motor) as a coarse actuator and a piezoelectric actuator as a fine actuator. By adopting controllers with two-degree-of-freedom and by optimizing H$_{2}$ faster precise tracking can be realized. Experimental and numerical results are presented to demonstrate the control effects.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2008.06a
• /
• pp.937-938
• /
• 2008

• The Optical Journal
• /
• s.146
• /
• pp.28-32
• /
• 2013

카메라 없는 모바일 기기는 상상할 수 없을 만큼 스마트폰 카메라가 대중화되어 있다. 모바일 기기에는 카메라가 필수 요소이며, 특히 스마트폰에는 자동초점 카메라 모듈이 기본으로 장착되어 있다. 따라서 카메라모듈 시장은 더 이상의 논의가 무의미할 정도로 전망이 아주 밝다. (그림1)은 기본적인 카메라모듈의 구조로 국내 공급업체와 증권사의 자료를 참조하였다. 스마트폰에 카메라가 기본적으로 장착되어 있는 만큼 기술적으로나 사업적으로 많은 이슈가 있다. 본고에서는 중국 시장과 자동초점 카메라모듈에 적용되는 액추에이터의 일종인 VCM(Voice Coil Motor)의 특허 분석을 통해 스마트폰 카메라의 동향에 대해서 기술하고자 한다.

• 제어로봇시스템학회:학술대회논문집
• /
• 2000.10a
• /
• pp.121-121
• /
• 2000

This paper presents a design of macro-micro system for high-speed mounting of micro-chips. A macro motion device is driven by DC servomotor and ball screw mechanism. To obtain fast response, a micro motion device utilizes a precision elector magnetic actuator In order to reduce peak impact force, We evaluate the design parameters that have an effect on it. And a characteristic of response is simulated using PID controller in velocity and force control.